Can I pick which GPU is used for CUDA? I have 3 X GTX480

I'm taking a gaming pc and getting in to video. Asus Rampage 3 extreme, 980x, 12gb ram, and 3 GTX 480's.
I plan on hooking up 3 (or 4) monitors.
If I hook up the monitors to cards 1 and 2, can I pick to use GPU 3 as the CUDA GPU in PPro?
I know sli won't help the cuda process. Should I just sli (and thus mean only bridge) the 1st 2 cards?
Should I sli at all? I don't see what the benefit would be as I'm focusing on taking advantage of the CUDA on GPU #3.
Thanks!
Dan

I needed to confirm which gpu was used by adobe, thus will put my other monitors on cards 2 and 3. Might want to wander through the Nvidia forum and maybe query some specifics there. Look for some posts from Raptor, he's good. No point in sli from what I see.
I'm keeping my center monitor as primary, so when I'm not doing this, I can disable all other monitors, sli the 3 cards with center monitor and play some fast 3D gaming.
Bottleneck? If similar to this box, only thing I see is how fast can you get the cpu to crunch rendering and stay stable.
Regards,

Similar Messages

Can I change which nic is used for a cluster network when more than one nic on the node is on same subnet?

This cluster has been up and working for maybe a year and a half the way it is. There are two nodes, running Server 2012. In addition to a couple network interfaces devoted to VM traffic each node has:
Management Interface: 192.168.1.0/24
iSCSI Interface: 192.168.1.0/24
Internal Cluster Interface: 192.168.99.0/24
The iSCSI interfaces have to be on same subnet as management interfaces due to limitations in the shared storage. Basically if I segregate it I wouldn't be able access the shared storage itself for any kind of management or maintenance tasks.
I have restricted the iSCSI traffic to only use the one interface on each cluster node but I noticed that one of the cluster networks is connecting the management interface on one cluster node member with the iSCSI interface on the other cluster node member.
I would like for the cluster network to be using the management interface on both cluster node members so as not to interfere with iSCSI traffic. Can I change this?
Binding order of interfaces is the same on both boxes but maybe I did that after I created the cluster, not sure.

Hi MnM Show,
Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
will be disabled from Cluster use. This network should set to lowest in the binding order.
The related article:
Configuring Windows Failover Cluster Networks
http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can we pick which theme is used with our id?

I seem to have the third theme I created associated with my
id (shown in the little square), and I'd really like to change it
to something more interesting.

quote:
Originally posted by:
Sami Iwata
Currently the avatar is your first RGB theme--no special
reason, it's just what we did for 1.0. We understand that people
will want to choose their own, and it's on the Wish List.
Sami
Sami, my first RGB theme was a 3 color only combo, and
because of that, I have no avatar at all. Probably because I did
not create a 5 swatches for my first.

Brand new user I have plugged in my external Hard which I was using for my windows laptop into my IMAC and it now appears I have lost all of my files is there any way I can recover these ?

Brand new user I have plugged in my external Hard which I was using for my windows laptop into my IMAC and it now appears I have lost all of my files is there any way I can recover these I didn't know that you should reformat

only if you have a backup can you recover

I have an Airport Extreme which I'm using for a wireless network. Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.

Yes, you can.

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

Which cable should use for Sony DV connect to iMac ?

Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
http://www.radtech.us/Products/ProCableFW400800.aspx
Links are to illustrate examples. You should be able to pick them up at most computer stores.

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

Which tool is used for database designing

Hi,
Can you please share which tool is used for database(Oracle) designing most
Thanks

Kim Berg Hansen wrote:
Personally I use brain, pen and paper for designing/modelling - then simply write scripts to create those tables.Me too.
But of course I realize that is not the way of a modern programmer :-)No, modern programmers rely less on the brain part.
I have heard other people saying that the (now free) [url http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html]SQL Developer Data Modeler is helpful for modelling. I haven't any personal experience, though.
I have used it to reverse engineer the design resulting from the brain / pen / paper / scripts process and produce pretty pictures for the modern programmers to try and understand. It works quite well for this.

How to disable iMessage for an old Apple ID which is only used for AppStore?

How to disable iMessage for an old Apple ID which is only used for AppStore?
I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account.
New Apple ID - iCloud & iMessage (**** thing that I can't use my okd Apple ID for iMessage and another for iCloud) on new Mac
Old Apple ID - AppStore, iMessage days ago
So now how to disable the iMessage function for my old Apple ID which isn't used anymore?
Thank you!

Yeah the problem is that I want to be reachable by:
*new apple id
*mobile number
Earlier:
*old apple id
*mobile number
Problem - if I set in Settings => Messages => Receive at:
*new apple id
*mobile number
Others still can see my old apple id as "iMessage" although it isn't used a iMessage anymore. So how to disbale iMessage function for that?

Which Smartform is used for output of a (confirmation) sales order ( in tra

Where in customizing I can see which Smartform is used for output of a (confirmation) sales order ( in transaction VA02/VA03) and which print program.
If the mechanism is different please let me know
Thx in advance(right answers will be rewarded)

Hi Tina,
This is very simple.
You can go to transaction NACE
Now click on Output Types, here against your output type you can see what is the smart form attached in the field processing requirements.
If its order confirmation, it would either be standard BA00 or a copy of that, maybe the naming convention would help you.
Also If you click on the extreme left hand button in NACE, you can see against your output type what are the records maintained, and under communication tab, you could get to see the printer setting.
Hope this solves your query.
Reward suitably if helpful.
Regards
Ravi

Can Oracle Access Manager (OAM) be used for configuring data-level access?

Hi,
Can OAM 10gR3 or 11g be used for configuring data-level access in PS 9.10 and OBI 11g.
This would mean that data-level configuration are stored centrally within OAM database and PS 9.10 pulls these settings for its appropriate Row and ChartField security and OBI 11g queries OAM database tables to populate the initialization blocks during login.
If you have configured this successfuly, please feel free to provide highlevel details/steps about the configuration and any complexities that can pre present.
Thanks.

I recently worked on an interesting implementation that utilized OAM configured against OID in which OAM was configured to control authentication/authorization and then all applications that were serviced by OAM utilized the users login to pass to the database at which point the Oracle database utilized VPD, which was configured against the same OID instance, to leverage user attributes/groups in order to configure fine-grained access control to data within the database. Not sure if this would work for you unless your requirements are similar but it worked very well for this particular implementation as it allowed them to have SSO for their own apps and for BI Publisher which then could pass allong the userid to be leveraged by the database to do fine grained access control.
Edited by: oblix_fan on Jun 23, 2011 8:10 AM

Can I pick which GPU is used for CUDA? I have 3 X GTX480

Similar Messages

Maybe you are looking for