Can I place an clipped eps image into a PSD file?

WINDOWS
CS2 Photoshop
I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7.
When I place the eps file into PSD, I don't get the clip I get the entire image.
I made sure that I saved the file with the clip path.
Any thoughts? Thanks for the help.

Not that I'm aware of. The whole vector stuff has been changed for CS2, including completely revised file format loaders and later on the addition of smart objects of course, which of course is what you would do in CS3...
Mylenium

Similar Messages

How can I access the thumbnail/preview image of a PSD file?

Hey guys I'm trying to salvage some work from a corrupted PSD file via the thumbnail. What happened was I saved my work and closed photoshop and hit the reset button on my PC afterwards by mistake (i dont see why this caused a problem because the program was fully closed at the time). When I open the file now it says it uses an unsupported blending mode, if i press ok I get an error saying incompatible PS version, if I press flatten it says unexpected end of file was encountered. Ive tried PSD repair tools and searched the net for solutions and there doesnt seem to be any - Ive pretty much given up on trying to repair the original file.
The thing is, the thumbnail of the file seems to be intact because I can still see it as the file icon. I wanted to know if there was any way i can access this thumbnail image so i can enlarge it. Any help would be very appreciated!!

I have an idea to try... Earlier I mentioned the Windows Picture Viewer... Normally that won't read PSD files, but I'm used to using that to look into PSD files because at one point I bought the FastPictureViewer Codec Pack.
Something to try, and it won't cost anything:
1. Try downloading and installing the FastPictureViewer Codec Pack from here: http://www.fastpictureviewer.com/codecs/
2. Once it's installed you get a free trial period, so you can try opening your PSD file by right-clicking on it and choosing Preview.
If that fails, here's another thing to try:
Open the Bridge component of Photoshop and navigate to the folder in which you have the file. It may be able to make a larger thumbnail than the one you're seeing.
Other than that, are you saying you're seeing the thumbnail in Windows Explorer? If that's the case, what happens if you right-click in the white space near the file and choose View - Extra Large Icons?
-Noel

How can I copy pictures from google images into MS word for iMac

how can I copy pictures from google images into MS word for iMac.
How can I copy pictures from iphoto to MS word for iMac.

As MS Word is not an Apple product, you may do better posting in the MS forums:
Office for Mac forums
Most people find them very helpful

How can i export video clips in iPhoto into iMovie?

how can i export video clips in iphoto into imovie?

Hello andrewmarkp,
As long as the videos are in a format that can be used by iMovie, they will appear in your Event Browser, under 'iPhoto Videos.'
iMovie '11: Use video from your iPhoto library
http://support.apple.com/kb/PH2196
If you’ve imported video from your digital camera into iPhoto, it appears automatically in your iMovie Event Library (as long as the video is in a compatible format).
To use iPhoto video in iMovie:
Click iPhoto Videos in the Event Library.
The videos appear in the Event browser on the right. You can select and use the video just as you would any other footage.
To learn about importing video into iPhoto, open iPhoto and choose Help > iPhoto Help.
Cheers,
Allen

How to get the image into the PDF File, Cut the image into the PDF What acrobat product help to do that?

I need to cut some image into the PDF file, what Adobe product can help me with it?

Hi Hugo,
Please elaborate your issue. What exactly do you want to achieve?
Regards,
Rahul

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

There are a number of third party solutions for this. I just use Bridge, so can't recommend one in particular.

How can I view information about an image, such as the file name and exposure, on the Ipad?

how can I view information about an image, such as the file name and exposure, on the Ipad?

You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info

How to import a picture into a Psd file using codes?

I'm trying to import a picture into a psd file as a new layer, but i can't find the method of photoshop object in visual studio 2010 object browser. Is it possible to do this job using vb.net codes?
Any suggestion will be gratuated!

I beleive Michael L Hale stated that he used the ScriptListener to generate code for PhotoShop "menu File>Place". Many things can not be done through in Photoshop Scripting through the Adobe's normal scripting methods Adobe provided for scripting. However Adobe also supplied the ScriptListener.8li plugin which when installed is a bit like the actions palette's action recorded without controls. Everthing that can be recorded in Photoshop is written to two files on your desktop in script code one in Javascript the other VBS. The Script code use an Action Manager Method so thing not posible with normal scripting methods can be use in scripts. The only way to start and stop recording these two script files it to install ScriptListener.8li before you start Photoshop and to uninstall it after you exit Photoshop. Awarkward but better then nothing there is no logic just step, step, step like actions and the code is not all that readable. However you can take that code and modify it to use vars to turn steps into javascript functions and whatever VBS uses.
For example Place
REM =======================================================
DIM objApp
SET objApp = CreateObject("Photoshop.Application")
REM Use dialog mode 3 for show no dialogs
DIM dialogMode
dialogMode = 3
DIM idPlc
idPlc = objApp.CharIDToTypeID( "Plc " )
    DIM desc3
    SET desc3 = CreateObject( "Photoshop.ActionDescriptor" )
    DIM idnull
    idnull = objApp.CharIDToTypeID( "null" )
    Call desc3.PutPath( idnull, "D:\\Temp\\Portrait\\dsc6234.psd" )
    DIM idFTcs
    idFTcs = objApp.CharIDToTypeID( "FTcs" )
    DIM idQCSt
    idQCSt = objApp.CharIDToTypeID( "QCSt" )
    DIM idQcsa
    idQcsa = objApp.CharIDToTypeID( "Qcsa" )
    Call desc3.PutEnumerated( idFTcs, idQCSt, idQcsa )
    DIM idOfst
    idOfst = objApp.CharIDToTypeID( "Ofst" )
        DIM desc4
        SET desc4 = CreateObject( "Photoshop.ActionDescriptor" )
        DIM idHrzn
        idHrzn = objApp.CharIDToTypeID( "Hrzn" )
        DIM idRlt
        idRlt = objApp.CharIDToTypeID( "#Rlt" )
        Call desc4.PutUnitDouble( idHrzn, idRlt, 0.000000 )
        DIM idVrtc
        idVrtc = objApp.CharIDToTypeID( "Vrtc" )
        DIM idRlt
        idRlt = objApp.CharIDToTypeID( "#Rlt" )
        Call desc4.PutUnitDouble( idVrtc, idRlt, 0.000000 )
    DIM idOfst
    idOfst = objApp.CharIDToTypeID( "Ofst" )
    Call desc3.PutObject( idOfst, idOfst, desc4 )
Call objApp.ExecuteAction( idPlc, desc3, dialogMode )

How is it possible, that a pdf file turns into a psd file while sending with mail

I have send a pdf file as attachment with mail. the file shows correctly as pdf file. but when the file arrived at the addressed location it turned into a psd file. in addition it seems there is a problem sending png and ai files. once those files have arrived through mail I am getting the feedback, that the files are are not scalable, they are fuzzy or completely messed up.
has anyone an idea, where the problem comes from?
thanks for response
angelika

Hello,
toddisalive wrote:
Additionally, I have found an AppleWorks file that could be the script, but it is ZERO bytes in size, and Pages won't even open it, saying that it is not a valid AppleWorks file.
if the size of this file is really ZERO bytes, either the original file contained an empty data fork and a resource fork which was stored elsewhere (*) or the file is too damaged to retrieve anything. Moreover, as AppleWorks never generates file with empty data fork, at least to my knowledge, ....
Concerning the Movie Magic ScreenWriter files, the application seems to exist for Yosemite http://www.write-bros.com/movie-magic-screenwriter.html ( but it seems "expensive" and I do not know if it accepts to import old files )....
(*) maybe in .TOTO or __MACOSX/.TOTO if the filename is TOTO

How do I place a large format image into Illustrator

I am trying to place a large format image that I created in Photoshop into Illustrator. I have tried PSD, TIFF, and JPG. I have even cropped down the image into smaller portions to try to make it easier to work with. Every time I try to Place the image I get a dialogue box saying,"The file 'Water 1.jpg' is in an unknown format and cannot be opened.' Can anyone help with this?

I would guess the file is simply too big. Make sure the document is in RGB mode. If I were you, I would never submit a file that size at 300ppi for large format. Large or grand format printers only need around 100 to 144ppi at 100% final size. Also, set the Illustrator file up at 25% scale and place the image at 25% @ 300ppi ( image resolution ends up around 75ppi which is still plenty when enlarged 400% to final size ). Getting back to the original error message, it could be the system is running out of both RAM and scratch disk space and cannot deal with the preview required. Better to scale the file down for large format.

Can't place tiff or eps, can't export pdf - "out of memory" masage

Hi, I have have CS2 prem, have problems with cmap files in Indesign and resolve them but now after installing again and starting I can import jpg but can't import tiff or eps "out of memory".
When opening an old document display performance are typical but some of the images look typical as they must be but some look like fast preview even in tipical mode.
Have enought memory - check already. Also Indesign works correct ... 2 years on this computer.
So, i can't use the program for finel projects )))
Can anyone help me?

Answered in the other thread.

How can I load preview images into an extra file?

Hi,
I've got a question concerning those preview images. I wrote a plugin which uses the actual paths of the photos in the catalog an stores those paths of each photo into a log file. Then an external program has access to that file for further handling. So now I would like to use preview photos instead of the raw images. First, because the user might want to use the picture he/she edited with Lightroom; And then because of the size.Processing a preview image of level 5 would be more efficient than the original photo.
So how can I get those preview photos? And more important: is it possible to store them in an extra file in a jpg format for instance, so that an external program can make use of them?

Look at source code in PreviewExporter plugin.
robcole.com - PreviewExporter

Photoshp CS2 - why can't I just cut an image into a circle?

Hi,
I could do this with some lousy Microsoft pictureit my kids had years ago - and yet I cannot do it with photoshop.
Have followed several tutorials saying draw the circle - invert, yadda yadda and I just keep getting errors. Only thing I can cut is a rectangle - in my world we call that cropping.
Please advise - super frustrated by a simple task!
Any help would be appreciated.

Qzzzzzzzzzzzz wrote:
I would like to be able to import graphics, cut in varied shapes - right now a circle - and use them in either illustrator, inDesign or both. I will be using the overall design from inDesign or illustrator to print postcards on my own printer.
OK! Now, see, your answers make a WORLD of difference.
Since you didn't specify I'm going to assume that your versions of Illustrator and InDesign are contemporary to your version of Photoshop.
That being the case, then both of those applications are perfectly happy working with native .psd files. You can place them in either application and they will "understand" and respect the transparency attributes of the Photoshop file you place in those apps.
Now then, rather than deleting any selections you may make, you will be afforded far more flexibility and editability by turning your selections into a mask. A mask will hide whatever it covers, and make it appear as though the masked part of that layer is transparent, revealing whatever might be on any layers beneath the masked layer. You may have a mask on each layer.
Remember that the default indicator for transparency the whole way through to the "bottom" of a file is Photoshop's gray & white checkerboard pattern. If you see that, you're seeing transparency.
For complete transparency, then, you will want to promote your default Background into an actual, floating layer. You do this by double clicking on its name in the Layers Palette.
Also remember that the default Background color is white, and for many projects it won't need to be promoted to a layer. Why? Well, think about it for a minute: White is the abscence of color when printing; so long as there's nothing composited benath or around your masked object, nothing will print where there that Background white color is displayed, and the medium (let's say, for example, that it's a colored or preprinted sheet of paper) will show through.
Of course, like most things with Photoshop, there are lots of things to learn about the process of masking. And for that, I've gathered together a bunch of links to instructional sources at the thread link below. What you need sounds pretty simple, so for now, you can just scan the links in the thread and read up on basic masking procedures.
Once you've done a little homework and experimentation, feel free to return to this thread and asked more focused, specific questions.
Photoshop Lounge Resource Repository: Advanced Masking and Isolation:
http://forums.adobe.com/thread/370974?tstart=0
Hope that helps!

I can't drag and drop an image into Photoshop CS5

I don't know what's going on. I've never had this problem before.
When I try to drag and image into photoshop I get the black circle with a black line through it
I took of the administrative settings also. I've tried everything, I've uninstalled it then reinstalled it. Nothing. Please help.

Well yes cleem any photoshop icon, or shortcut, whether its in your start menu, on you desktop....
careful: this is tricky, if you right click the photoshop icon on your windows 7 taskbar, a new menu opens, you'll have to right click again on the "Photoshop cc" icon, in order to access properties.
does this make it clear? did it work fine with you? let me know

Can't import Canon G12 RAW images into iPhoto 6.0.6

unable to import Canon G12 RAW images into iPhoto 6.0.6 (Mac OS-X (10.5.8) - any ideas?

You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
Regards
TD

Can I place an clipped eps image into a PSD file?

Similar Messages

Maybe you are looking for