Can I play audio output through both my iMac speakers and Apple TV simultaneously?

I have Bose speakers conected to the headphone jack on my iMac.  When I select Airplay Mirroring on the iMac, the Bose speakers become disabled as audio is then streamed to Apple TV which resides in another room?  Is there any workaround which will give me audio to both the headphone jack and Apple TV simultaneously? Thanks.

it's shown here
http://www.maclife.com/files/imagecache/futureus_imagegallery_fullsize/gallery/a irplay_2.png
the ones one check with the green V play audio

Similar Messages

  • Play music on imac speakers AND through jack

    Hello,
    I'd like to play music on both the iMac speakers AND on my HiFi through the jack.
    I have not found any option to do that. If I connect the jack, the speakers automatically go off.
    Thank you.

    play75010 wrote:
    I still think that the switching could be bypassed in some way.
    I'm going to dig a bit more.
    I believe the hardware is capable of doing what you want.
    We know that inserting a plug in the headphone jack doesn't
    physically disconnect the internal speakers -- because the
    "startup gong" always comes from through internal speakers.
    OTOH, many iMac audio gurus have done considerable digging
    without success.
    ...but good luck, anyway,
    Looby

  • How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    Should be able to go into your sound preferences and choose your output device, you can also try downloading Airfoil and try that, it's a pretty cool app.

  • How can I play my ipad through my TEAC speaker

    I have a 2/3 year old single TEAC speaker with no airplay functionality. How can I play my ipad through this speaker, preferably without wires
    Thanks

    If you're just looking to play audio, the easiest way is to buy an AirPort Express and connect your stereo to the miniplug jack, then play using AirPlay. That's how I do it! And as an added bonus, it can extend your wireless network.
    http://www.apple.com/airportexpress/
    An AppleTV would work too, if you're also looking to stream video.
    http://www.apple.com/appletv/

  • My wireless earbuds work just fine, but some third-party apps play audio only through the iPod speaker even though the buds are properly connected.

    My wireless earbuds work just fine, but some third-party apps play audio only through the iPod and iPhone speaker even though the buds are properly connected. Does anyone know why and is there a solution?

    Assuming you are using Bluetooth headphones, do the apps have the option to use Bluetooth?
    The app should have an option to select the speaker (or wired earphones) or the Bluetooth headphones.
    You can also try:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Can i play internet radio through my airport to my stereo?

    Can i play internet radio through my airport to my stereo? ps I am not very technical so easy answers would be appreciated.
    Thanks

    For the block party we just had I was doing just that. I already had a wireless network in my house so what I did was connected an Airport Express to my wireless network in my garage. The Airport Express has an audio jack on it. To this jack, I connected my amp and speakers down in the garage. I was then able to connect iTunes to the speakers over the wireless network.
    One additional benefit was that using the Remote app on my iPhone I was able to control my iTunes remotely from the garage to change music from downstairs.
    It all worked like a charm.
    Allan

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • I can't select "audio output stereo" on a track in the arrange window

    When I create a new song, in the Arrange window I can
    choose "audio output stereo" for a given track, and
    access the mixer's output from there. Fab.
    When I open a song that I oringally created using Logic 5,
    "audio output stereo" does not appear.
    Is this something about the file format?
    (a) is there something simple to do to enable that for
    older songs, or (b) is there a way to convert older song files to LE7?
    thanks,
    fred, san rafael.
    [email protected]

    Sorry, je suis un idiot.
    FYI. I went into the Environment window and found "Output 1-2"
    to be un-checked. Checking it now makes "audio output stero" an available option in that song.
    Thanks for listening.
    fred

  • Satellite L-50 can't play audio from multiple sources

    I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
    I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
    25/02/14
    DTS Studio Sound
    DTS Inc.
    Windows 8.1 - 64 Bit
    1.01.2700
     I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0 
    I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
    10/02/15
    Sound Driver
    Integrated Device Technology Inc.
    Windows 8.1 - 64 Bit
    6.10.6491.0
    IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
    Why are toshiba releaseing old driver as 'NEW' ?
    2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"
    Attachments:
    audio.png ‏6 KB
    test2.png ‏7 KB
    specs.png ‏16 KB

    Can you check the full model and part number from the laptop?
    - Peter

  • Satellite L50-A-19N can't play audio from multiple sources

    I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
    It goes away when I plug out my headphones..
    I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
    25/02/14
    DTS Studio Sound
    DTS Inc.
    Windows 8.1 - 64 Bit
    1.01.2700
    I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
    I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
    10/02/15
    Sound Driver
    Integrated Device Technology Inc.
    Windows 8.1 - 64 Bit
    6.10.6491.0
    IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
    Why are toshiba releaseing old driver as 'NEW' ?
    2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

    I see that the option called “give exclusive mode applications priority” has been checked.
    Usually different applications and programs can access the sound card simultaneously.
    For example: you can hear the sound in game, while you can run your own music via an external player.
    This is prevented with these options “give exclusive mode applications priority”.
    Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
    I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
    However, I use Win 7 and Realtek sound driver… It’s another configuration.
    So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

  • The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files?

    The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files from websites?

    You have a <b>general.useragent.override</b> pref that identifies you as Firefox/3.5.7
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
    See:
    *https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

  • Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

    can i play  audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you 

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • HT4241 can you play your xbox through this cable, on you mac 24"

    can you play your xbox through this cable, on you mac 24"

    can you play your xbox through this cable, on you mac 24"

  • Why i can't play my music from my iPad on the same apple ID on my macbook pro? it say's iam gonna accept my computer

    Why i can't play my music from my iPad on the same apple ID on my macbook pro? it say's iam gonna accept my computer and where am i gonna do that

    Possibly nobody has answered this in 10 hours because your question is not clear.  Accept?  What exactly are you trying to do?
    Do you mean authorize?
    iTunes Store: Authorize or deauthorize your Mac or PC - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
    iTunes application window (not Finder or a browser) > menus at top >  Store menu > drag down to Authorize This Computer. (In earlier versions of iTunes access this option from the Advanced menu).  Step-by-step instructions - https://discussions.apple.com/message/16569470
    Image of where this is in iTunes 11: https://discussions.apple.com/message/20585561

  • I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I think you're asking 2 different questions.
    The PID control toolset is for using PID loops for control; it's just software.
    The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
    I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
    Mark

Maybe you are looking for

  • "Adobe Muse Stopped Working"

    I've been using Muse for about a month, with no problems. Today, I have repeatedly crashed with the error "Adobe Muse Stopped Working". This happens 10 minutes or so after I open Muse. It happens whether or not I have another app open. I tried closin

  • How do I move my iTunes account to a new computer?

    Recently bought a Mac, my itunes account is on our laptop. How can I move that account to our Mac? I've authorized both computers to share info and have downloaded all the info from our laptop to a 'time capsule'. In the end I want to juist log into

  • Windows task bar no longer auto hides when I fullscreen a flash video.

    Like the question reads, my task bar is no longer auto hiding when I full screen flash videos in firefox. Other than the obvious issue of it just being unsightly and annoying, It also causes a few other problems. One being that the computer no longer

  • Freezing and shutting down

    My iPhone 3GS shuts down after around 2 minutes during a call. It stays shut down with a frozen apple logo on the screen for 2 - 3 minutes, then re-boots. How do I cure it? Ive tried updating and restoring, yet nothing works.

  • Is it possible to use a ODI variable in a procedure

    I am trying to call an external java program from the operating system (MS-DOS) using a procedure. This is possible using the os.system("<command>") syntax - declaring a procedure to use Jython. However, I want to be able to pass two ODI variables to