Can i play napoleon total war in my macbook air

Hello can i play napoleon total war in my macbook air 11.7 mid12 64g og do it run ok og doesnt my computer gonna slow? Thank.

The above is a screen cap from the App Store page for the game. Typically when the VRAM for a GPU is listed it's usually targeted at discrete cards not shared GPUs like the one found on the MacBook Air. I have not had the opportunity to install onto my MacBook Air yet as it's only got 4GB of RAM but I did install it on my 13" rMBP with 8GB of RAM and it's playable on low-to-medium. You definitely won't be running the game on ultra.
I found turning down the shaders, shadows and particle effects help tremendously as by mid-battle with all the units in the play the game definitely got a bit laggy due to pure unit count.

Similar Messages

  • Can I play Empire Total War on my Macbook Air 13" 2012?

    I do not need to run it on ultra settings. Just medium without any lag. Here are the specifics for my Air:
    Processor  1.8 GHz Intel Core i5
    Memory  8 GB 1600 MHz DDR3
    Graphics  Intel HD Graphics 4000 512 MB
    Software  OS X 10.8.2 (12C3012)

    The above is a screen cap from the App Store page for the game. Typically when the VRAM for a GPU is listed it's usually targeted at discrete cards not shared GPUs like the one found on the MacBook Air. I have not had the opportunity to install onto my MacBook Air yet as it's only got 4GB of RAM but I did install it on my 13" rMBP with 8GB of RAM and it's playable on low-to-medium. You definitely won't be running the game on ultra.
    I found turning down the shaders, shadows and particle effects help tremendously as by mid-battle with all the units in the play the game definitely got a bit laggy due to pure unit count.

  • Napoleon Total War Error 403 Macbook Air

    I've been downloading Napoleon Total War for my Macbook Air and the last few times I have recieved a 403 forbidden error. It has not completed download, and is not in my application folder so Feral's answer to several other users will not work for me. 

    Disable anti virus software if installed.
    If you have Little Snitch installed, that can prevent apps from downloading.
    Mac App Store: How to resume interrupted downloads
    Make sure Mac App Store is selected in:  System Preferences > Security & Privacy > General
    message edited by:   cs

  • I bought Napoleon Total War from iTunes on 13 July. It downloaded properly and appeared on my iMac. Now, four days later I cannot find the application on 'Applications' or anywhere else on the computer, even  with the help of Spotlight. Help.

    I bought Napoleon Total War from iTunes on 13 July for £20.99. It downloaded properly and appeared on my iMac. Now, four days later I cannot find the application on 'Applications' or anywhere else on the computer, even  with the help of Spotlight. Help.

    A refund may not be possible since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
    http://www.apple.com/support/itunes/contact.html
    It's possible they'll make an exception for you.
    Good luck.

  • Napoleon Total War

    Hi All,
    I have a G570 i5 with 6GB RAM and Radeon HD 6370 dedicated graphics card.
    I am having trouble with Napoleon Total War. To get the game to run smoothly I am having to run all the graphics settings at low or near low.
    I expected that this computer would be able to cope with such a game and run all settings on high without any issue.
    Was I run with this expectation?
    If so can I adjust any system settings to allow it to run better.
    The system works fine otherwise and is only 1 month old.
    I only have 1 other game at present "Medieval Total War", and this will not run correctly at all. Apparently due to an issue with Windows 7.
    Thanks,
    Rob

    check your user manual. if your system supports sw graphics, you need to activate it ( it should have a sw buttton )
    also, make sure you select high performance on power management.

  • We have an "old school" DVD player (Sony dvp-nc80v) that plays music throughout our home.  Is there a connector that we can purchase to hook-up our iPhone or MacBook Air to also play music until we buy some new equipment?

    We have an "old school" DVD player (Sony dvp-nc80v) that plays music throughout our home via connection to multiple embedded speakers.  Is there a connector/piece of hardware that we can purchase to hook-up our iPhone or MacBook Air to also play music until we buy some new equipment?

    A crude but effective way would ,assuming the Sony has an AUX in ,
    is a stereo bluetooth receiver
    plugs into aux and recives music over B/T from
    the iPhone etc ,as used by many in vehicle
    For instance as an example
    http://www.amazon.co.uk/Belkin-F8Z492cw-Bluetooth-Music-Receiver/dp/B0037LHUSE

  • How can I sync apps from my iTunes on Macbook Air without syncing apps from the iPad 2 to my Macbook Air?

    How can I sync apps from my iTunes on Macbook Air without syncing apps from the iPad 2 to my Macbook Air? (As my Macbook Air is only 64GB and my iPad is 64GB and that my Macbook Air only has 40 GB left...) Or is there no other way but to sync apps from iTunes to iPad without syncing apps from iPad to iTunes(it says Backing Up , then it says Converting files to iTunes, then it shows the name of the app on the bottom...)

    Yes, sign in with the same Apple ID as your stolen one in the new iPod Touch.

  • 13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

    My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

    Boot the MBP with the OPTION key down.  If successful, you should see two HDD icons,  Select the recovery partition (on the right).
    From the 4 option menu select Disk Utility.
    Run Disk Utility>First Aid, Verify and Repair.
    If the disk cannot be repaired, it will have to be replaced.
    Ciao.

  • Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?

    Can I add a second monitor to my MacBook Air notebook and use both monitors simultaneously?  For example, have a spreadsheet open on the notebook monitor while the second monitor is displaying an architectural drawing?

    MiniDisplay-to-? adapters ... ? replaced by VGA or DVI or HDMI
    Best to use only 1 adapter to match the intended cable since mutliple-adapter setup (buy a VGA, then add VGA-DVI adapter) tendsto lose signal strength.
    Also graphics chips run hotter driving external display, and since the graphics chip in Air is part of the CPU the CPU may throttle itself as the integrated graphics chip heats up.
    Two modes of operation:
    Mirror ... same image both displays
    Extended ... the other screen is "extra screen space"

  • How can i save a pages doc from my macbook air into include

    how can i save a pages doc from my macbook air into include

    For about the 20th time, iWork for OS X, at this time, isn't iCloud aware.
    Look at :
    http://support.apple.com/kb/HT4942
    Yvan KOENIG (VALLAURIS, France)  mardi 22 janvier 2011 10:52:50
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How can i transfer microsoft office to my new macBook air?

    How can I transfer microsoft office from my old MacBook Air to my new one?

    All your data will be transferred if you use Setup Assistant, which starts automatically the first time you boot the new machine. You may need to contact Microsoft to reactivate the product.

  • Can I use a power cord from a Macbook air with a Macbook?

    Can I use a power cord from a Macbook air with a Macbook?

    No, the MacBook Air power adapter is a 45 watt. A MacBook needs at least a 60 watt power adapter although you can use a MacBook Pro 85 watt adapter. You can use a higher wattage adapter without any problems.
    http://support.apple.com/kb/HT2346

  • I have Works and Pages installed in my iMAC? I am wondering if I can use the same license installed in my MacBook Air?

    Hi there,
    I have Works and Pages installed in my iMAC? I am wondering if I can use the same license installed in my MacBook Air. Appreciate your help.

    HI Pam,
    You've posted this question in the AppleWorks community, meant for discussion of issues and techniques involving Apple's now discontinued productivity application, AppleWorks.
    The answer to your Pages question depends on how, and with which licence, you purchased iWork or Pages.
    If you:
    -Downloaded the thirty day trial of iWork, then purchased a registration number to activate it,
    OR
    -purchased and installed iWork from the boxed DVD retail package,
    then you purchased either a one user, one machine licence, and will need to either remove the iWork applications from your iMac when you install the package on the Air, or purchase a new copy of the individual applications you want and install them on the air.
    OR
    you purchased a Family Licence, which permits you to install and use iWork on up to five computers owned by members of the same family, living under the same roof.
    If you downloaded Pages (with or without the other iWork applications), then your licence permits you to download and install the application(s) on any compatible device attached to the same Mac app store ID as was the Mac on which it was originally installed.
    Regards,
    Barry

  • How do I can I install MS Office 2008 on a MacBook Air w/ a valid product key? Can I download files somewhere?

    How do I can I install MS Office 2008 on a MacBook Air w/ a valid product key? Can I download files somewhere?
    Here's the scenario....
    I've got a brand new gift MacBook Air 11" and I want to install Microsoft Office 2008 since I have a valid key license that's given by my nephew. Do I have any other options here?  Can I download all the necessary files from somewhere officially and just enter the Product Key to install what I need?  Are there other possible options? 
    Your help would be much appreciated.
    Thank you very much.

    You can use a remote disc to download Office as shown here:
    http://support.apple.com/kb/HT5287
    But please note several cautions:
    1.  The product key is intended for one machine only.  You would have to be the sole user.
    2.  Office 2008 is now very close to being obsolete.  Office 2011 has been out for years, and Office 365 is available for your Mac as well.

  • I can not get iTunes to open on my macbook air and I'm running 10.84 it is saying there is a newer version to download

    I can not get iTunes to open on my macbook air and I'm running 10.84 it is saying there is a newer version to download or quit itunes so it dose not fully open

    The file that I'm have issues with in itunes is the file called iTunes Libary.itl. 
    So just to get itunes to open I had to delete that file and then sync all of my music back into itunesday, is there anyway so I do not have to keep doing that?

Maybe you are looking for

  • Garageband erased all aiff files of recordings made!!!

    Hi there, I spent a few hours on garageband simply recording some audio over the internal mic. Some of it I recorded normally, some in loop mode. Then I edited it, cut out what I didn't want and also deleted whole tracks with some audio on it. After

  • Line chart in WAD

    Hi., I want to create line charts in WAD. But when i execute the report it is showing in a single vertical line. But in bar charts it is showing correctly. Please guide me to create reports. Thanks, Venkatesh

  • Why is the job putting itself on hold?

    Hi All I have a program connecting to and reading from a remote ftp server. If I run the program manually in forground or background everything is fine and completes within seconds. If I set up a job in SM36 the job put itself on hold with RFC as rea

  • Setup Database mail that connect with tcp/ip to the instance

    I want to setup database mail that connect to the named instance via a fixed TCP/IP port. This is a named instance that works with a fixed TCP/IP port Database mail works fine if shared memory is enabled. If it is disable I get the following log entr

  • My phone Number shows as unknown

    my phone numbee is showing unknown in phone setting how do I correct that