Can i play podcast and music at the same time

i have a suffle 3g and I want to use it for running.  I want the instructions from the couch to 5k podcast but with my own playlist?  is this possible

You should be able to plug in the computer and go. The Mac will automatically switch over to the cabled connection.
You don't need a static ip address for each computer. They will show up just as before.

Similar Messages

  • How can I have podcasts and music in the same playlist in iOS7?

    How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added  to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
    Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
    Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
    I can only think of these solutions:
    Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast. 
    Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
    I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

    How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added  to iTunes playlist which you can listen to on your Mac. But when you sync that playlist to iPhone, it will omit all of the podcasts.
    Previously, the workaround was not to download the Pocast app. That way, podcasts remained in iTunes where they could still exist in with music in the same playlist. But as of iOS7, you are required to install the "Podcasts" to be able listen to podcast at all. No more workaround.
    Why does this matter? Some people, like me want to drive or exercise while listening to a mix of music and podcasts. Apple's "improvements" have restricted the way that I am able to use iTunes.
    I can only think of these solutions:
    Convert the podcast into AAC or other format. Then iTunes sees it as "music" and it will stay in the playlist. Cons: 1. Burdensome. 2. Removes the resume feature from the podcast. 
    Use a different iPhone app. Spotify lets you drag any track (even podcasts) into a playlist and they stay there when synced to the Spotify iPhone app. Cons: 1. Requires Spotify premium service to listen to playlists on iPhone. 2. The resume feature is removed. 3. Very difficult to forward and rewind. 4. Some podcasts are rejected by the Spotify playlist, although its rare. 5. After being imported, the tracked need to be synced to the phone via WiFi (as with all tracks that are not offered via Spotify.)
    I am using the Spotify solution but am interested to know if there is an Apple solution. Or maybe I am the only one that wants to mix podcasts with music.

  • My SB Audigy 2 card can't use headset and musicamplifier at the same time

    Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
    The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
    In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
    I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
    But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
    Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
    please help, thx.
    Michael

    If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
    Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
    Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    Another option:
    Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
    --> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
    If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
    = You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
    .jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

  • Can WRT54G use WPA and WEP at the same time?

    I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
    In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
    Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
    Do I have to buy a 802.11g wireless print server? Or is there another solution?
    I don't supposed the linksys router can do both WPA and WEP at the same time?
    Connecting the print server to the router with a cable is not feasible. They are on different floors.

    both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • Can we use exceptions and conditions at the same time?

    can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • My I pad won't play pandora and solitaire at the same time. Do I have a setting wrong.

    My I pad won't play pandora and solitaire at the same time. Do I have a stating wrong

    Pandora is supposed to play in the background.  I suspect the solitaire app is trying or has grabbed the net connection. Try a different solitaire game.
    Ever wonder why a solitaire app needs access or location services?   Hmmm.

  • Streaming photos and music at the same time

    can someone explain to me how to stream my music and photos on my Apple TV at the same time (ie photo slideshow with music playing) I know you can do this if you sync everything but my music is 100Gb and doesn't fit on my apple tv or I would like to stream my music and sync my photos if possible?

    Same Question here. I have over 50gb of Photos so syncing is out for me. I'm okay with streaming all content, music , videos and photos but I want to hear my tunes while watching the photos.

  • Photo and music at the same time

    Hi,
    On the iPod Photo, can I look/browse mi photos while at the same time listening music of my choice (running both music and photo funcitons at the same time).
    Thanks
    Y.

    Hi Dave.
    Actually my question might look very simple, but i do not have one, it is for helping someone esle in getting into it.
    Thanks for your help
    Y.

  • Can we use CS6 and CC at the same time on different machines?

    We have a Creative Cloud subscription and have software downloaded to an iMac and also to a PC. I understand that we can't use the applications on both machines at the same time, but could one of my colleagues use the CS6 versions at the same time on the PC?

    Hi Carol
    A subscription to Creative Cloud gives you access to the CC version and the CS6 version of the software.  From the original question, it seemed to me that they were asking if they can share the subscription between 2 colleagues if one used the CC version and the other used the CS6 version.  That is not permitted as the subscription is licensed to one user.
    If you have a Creative Cloud subscription and a perpetual license for CS6 then you can use them concurrently on 2 machines as they are separate licenses.
    Does this help clarify?
    Thanks
    Bev

  • Can psc2510 work connected and wireless at the same time?

    My PSC2510 all-in-one is connected to my desktop the old-fashioned way.  Can I get my laptop to print wirelessly from the same printer?

    I'm pretty sure that USB and wireless connections can work at the same time on this printer. Just make sure the same PC is not connected by both USB and wireless. The software will get "confused" as to which way to communicate with the printer.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Can't use iPhone and Mail at the same time

    When my iPhone is on I can't receive Apple Mail on my computer. I get an error message on the computer that says another client is using the mail (or something to that effect). If I turn off the iPhone the error message usually disappears on my computer allowing me to access mail. Is there something I can do so I can keep my iPhone on and also get Apple Mail at the same time?

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

  • Can InterConnect support D3L and XML at the same time?

    Hi,
    In file Adapter.ini, ota.type can only be one of D3L and XML. Does it mean InterConnector can only support either D3L or XML parsing at one time?
    If I have different type of incoming files, I need to install at least two interconnectors to work, right?
    Thanks,
    Jie

    ASM diskgroup redundancy and SAN redundancy are not the same and work completely different. You cannot use ASM extern and high redundancy at the same time.
    A SAN does not know anything about Oracle database files and redundancy is usually accomplished by RAID. ASM is not RAID and does not duplicate complete disks. ASM data redundancy is based on disk failure groups and file extents. ASM knows about Oracle database files and automatically adjusts the stripping of data, which a SAN cannot. ASM also has the advantage that the storage size can be dynamically adjusted while the storage is online, without having to rebuild your storage devices. Rebuilding or extending a RAID based SAN solution usually means to reinitialize the storage.
    Beware of SAN snapshot and replication features as they may not provide complete backup or redundancy if you loose the complete storage.

  • Can't use Skype and PhotoBooth at the same time?

    I recently updated my Skype to the new version. I used to be able to have my camera on PhotoBooth and Skype working at the same time, however since I made the update I cannot. Depending on which programme I open first, the other will not work. If Skype is working, then the error message 'Camera offline' comes up. I have tried uninstalling and reinstalling Skype and that has not solved the issue. Does anyone have any ideas? Thanks.

    Never seeing this problem.
    Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
    Ernie

Maybe you are looking for