Can I plug a 2.5" drive in a Mac Pro?

I'm interested in getting an SSD as a startup drive, but they're only available in 2.5" form factor. The SATA connector is the same, and I assume that I should be able to plug one into my Mac Pro, even though the sled won't hold it (I'd probably have to hack something that will keep it into position). Has anyone done this?
Kirk

I would strongly suggest looking at the number of threads and users that have SSDs in their system.
There are also adapter kits available.
http://www.barefeats.com/nehal09.html
http://www.barefeats.com/hard103.html

Similar Messages

Can I install a Lacie D2 Drive in my Mac Pro

newbie question, sorry!
I have a Lacie D2 500 gig external drive that has crapped out on me. I was told that it could be possible that the enclosure is the problem and not the drive itself. If I take the drive out of its enclosure can I install it in one of the Bays in the mac pro?
thanks

okaypaddy wrote:
newbie question, sorry!
I have a Lacie D2 500 gig external drive that has crapped out on me. I was told that it could be possible that the enclosure is the problem and not the drive itself. If I take the drive out of its enclosure can I install it in one of the Bays in the mac pro?
thanks
It could just be the dead/defective power adapter Lacie seems to be a known for. Before you crack the drive open, i would strongly recommend that you test it with a known, working power adapter. Perhaps a friend with the same drive? If you're lucky, i've seen some of the Lacie drives set up in Apple Retail Stores, and perhaps an employee might let you test your drive there. Worst case scenario, you could order a new adapter which will set you back $19.00.
http://www.lacie.com/us/products/range.htm?id=10030

Can I move an SSD Boot Drive from a Mac Pro 1,1 to a newer 5,1?

I have a MacPro 1,1 (2 x dual core Xeon, 3.0 GHZ) with 8GB RAM and updated with an ATI 5770 video card, driving a 27" Cinema display; I'm running OSX 10.7.5. There's an SSD boot/OS/App drive, and the data is on a secondary hard drive with backup to the data on an identical third drive. Because it's time to update (I've had this flawless machine for nearly 4 years but need one with 64-bit capability) I've arranged to buy a 2010 Mac Pro 5,1, also with a 5770 card. I don't need the hard drives that are in that "new" one. I would like to just swap the three drives I have in the old one, and put them in the new box. Will I encounter any problems?

There are two types of base Systems:
a) "shipped in the box" with a specific model Mac. These will boot only that model, and software Update does not change that capability.
b) "Full Retail" or "Purchased" (even for $0). These will boot any appropriate Mac, because they contain "Drivers for every appropriate Mac."
Your 10.7 computer shipped with software much older, so I presume you purchased that 10.7, and would therefore expect it to boot any appropriate model Mac.
"A Mac can generally boot software no OLDER than what it originally shipped with."
This table shows the original shipping versions (some of which are custom builds) for these models:
Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Late 2013)
Dec 2013
10.9
10.9.2, 10.9.4
13A4023, 13C64, 13E28
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8, 10.8.3
11D2001, 12A269, 12D78
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
Mac OS X versions (builds) for computers
This table show that any build after 10.6.4 (custom) should work to boot a Mac Pro 5,1 2010.
CAUTION: the last version shipped on a "Full Retail" DVD was 10.6.3, which will NOT boot that Mac directly.
NB> If staying with 10.7, you should check whether you are running 64-bit kernel. If not, a terminal command and a re-Boot will fix that.

HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

Can I take the old hard drive from a Mac Pro G5 and put it into a Mac Pro Dual Xeon?

Hello,
I have an old Mac Pro G5 that still runs fine but the video card is bad so you can't see anything. Can I take the hard drive out of the G5 and put it into the Mac Pro Xeon without losing the data on it?
Thanks!

jenniferfromescanaba wrote:
Even if I go from the hard drive on the G5 to the next generation up from the G5 and put in that hard drive into that next generation up from the G5? Isn't the mounting nearly the same?
The storage bays are physically different from those in a G5. G5's had two bays in ther upper reat of the chassis, the Mac Pros have four slots running front-to-rear two thirds of the way up the chassis.
But as The Hatter says, you can use the G5 drives but may need to "manage" the data transfers.

Can I boot a pulled hard drive from a Mac Pro on an external dock?

I have a 2008ish Mac Pro that has a dead video card and a few other problems. Luckily, the hard drive is still functioning. Is it possible to pull the drive and boot it using an external dock in order to image the drive so I can use it on another computer?

Yes.
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means an external drive. Source means the docked drive.

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)

The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.

Can I move hard drives from one Mac Pro to another?

I have two mid-2010 Mac Pros that I work with daily - one 8-core on 10.7.3 and one 12-core on 12.7.4. I would like to take all of the drives out of one Mac Pro and put them in the other and vice versa, essentially trading their content. It probably sounds pointless, but I would like to build the more powerful one out from scratch, and right now the less powerful one is nearly empty.
Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.

rfairley wrote:
...Can I simply shut off both machines and swap all of the drives in one for all of the drives in the other? I would keep them in the same bays in the machine I'm trading them with, but I'm unsure if I will screw something else up.
I've moved drives from a Mac Pro 1,1 to a 5,1 and they were able to boot the newer Mac, but to ensure that the OS was configured for the newer machine, I ran the appropriate combo updater once the drive was installed. If you're planning to stick with the drive rotation, doing that shouldn't hurt and might help even though the machines are of the same vintage. Note, however, that some commercial software keys in on machine specifics and/or the serial number to prevent piracy, so swapping drives can cause other problems.

I'm not able to move files from my mac to my hard drive, but i can move files from my hard drive to my Mac. Would really like to make more room on my mac-any suggestions to get these files onto the hard drive?

When i plug my external hard drive into my mac i'm able to see all the files on it and move files off the hard drive to the mac, but not the other way around. I need to make more room on my mac and would really like these files to be on this particular external hard drive. Any help would be great!
Thank you
Kris

Thank you all. Sounds like i might as well buy a new (mac OS supported) external hard drive. Not worth the hassle/risk of taking all the old files off my current external HD.
Really appreciate all your help!
Kris

Hi can i put a ps3 hard drive in my mac mini its is the newest model before the new mac mini came out thank you

hi can i put a ps3 hard drive in my mac mini it was the newest model before the thinner mac mini came out thank you

Yes. You will have to reformat it with the disk utility though.

How can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

how can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

Mac OS X 10.9.2 is 12 years newer than 9.2.x. You need to make sure that Spotlight has indexed the external hard drive by adding it and removing it from Apple menu -> System Preferences -> Spotlight -> Privacy. Check the menu for it:
to determine if indexing is still going on, as it will say indexing.
Alternatively, you can use a non-Spotlight tool, such as:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement for MacKeeper, do not download).
http://www.barebones.com/ Textwrangler has a Search file for content, which works on any Text file.

I can't see two of my internal drives on my mac pro?

I can't see two of my internal drives on my mac pro? Any idea's or suggestions on how I can see them again. They were working last week just fine - Now they don't even show up in the finder? I have video stored on one and the other is just used for extra storage if needed - not really used much.

A drive that will not show BOTH its Make&Model AND a reasonable Size/capacity in Disk Utility has failed.
IF Disk Utility can see those things, use (Repair Disk) to attempt to repair its Directory. It takes about five minutes. If it finishes in 10 seconds, it just repaired the Partition Map and nothing else. Select the Macintosh_HD or whatever you renamed the Volume, and (Repair Disk) again.

Replacement CD/DVD Drive for 2008 Mac Pro?

I need to purchase a new optical drive for my 2008 Mac Pro 2.8 GHz Quad-Core desktop computer. I checked OWC, but they're out of stock. I currently have a Samsung SH-S222L, which I absolutely hate–mainly because the heads access the drive every 5 minutes or so. Very, very annoying.
Any help or advice is greatly appreciated.

Psst ! Here's a little tip for you. The drive used in Mac Pro's isn't exclusive to the mac. It's an Optiarc model
and I believe you can use any cd/dvd burning drive with an ATAPI plug on the back, Pc or Mac, and chances are it'll work fine, I used a Lite-On drive I snagged from a dying PC in my Mac pro 3,1 as my 2nd dvd drive
and it worked fine for a few years. Replacing it isn't that hard either. There are guides on Youtube or other places that show you how to do it. Just remember to remove the little lip on the front of the dvd drawer before you install it. I don't know about specific brands, but Pioneer seems fine, and I'm sure there are others that are fine, too. macsales might help you out. I know what it's like having to haul your Mac pro into your local Mac place--a pain in the butt, right? and then you have to wait...and wait...
I think you can can do this....
good luck
John B

When i plug in my atv 2 into my mac pro 10.9 by micro usb the white light dose not come on why???

When i plug in my atv 2 into my mac pro 10.9 by micro usb nothing happens. in all the videos i have watched the light should come on with out the power cord. Well mine docent and i have restored it.

David,
I am not sure why they are crashing the computer, but you definiately want to be careful with an external RAID 1. Here is what I would try first in your scenerio:
1. Reset the drives somehow. Obviously you can't do this on the iMac, maybe by formating them one at a time on a PC.
2. Plug these drives in through a USB hub (possibily even a powered hub) since you can't connect the drives through each other. Then before you connect the hub to the mac, you should have the drives fully spun up (in manual power mode, switch on the back) and the hub and on before connecting it to the Mac. This way, both drives have a higher chance of appearing simulteanously to the Mac reducing any need for rebuilding because of out-of-sync issues.
3. I'd then follow the steps in this article to reformat the drives for your iMac again:
http://macs.about.com/od/usingyourmac/ss/raidmirror.htm
I've never attemepted a RAID 1 on external drives so you'd have to let me know how this goes.
If all else fails, you could jump in on an order the school makes with the following company and get an enclosure to tranfer your drives into. We have at least three of these enclosures at school, we are running one in RAID 1 and the other two in a RAID 0 configuration.
http://eshop.macsales.com/item/OWC/MEPQ946QL2/
Nate

I need to buy some new hard drives for my Mac Pro

I had an extra internal hard drive in my Mac Pro, a Seagate one, that suddenly stopped working and I needed to send it to a data recovery company, so...
Now I'd like to
- Install a new internal HD
- Install a NAS with two/three disks. (Hitachi if possible, as I have read are the ones that last longer, more reliable than WD and by far more than Seagate).
But to do that I'd like to know how to find out the right type of disks for my computer.
I'd be very gratefull if anyone would tell me where to look it up.
Thank you in advance
In case any of you can help with this, these are the details of my Mac Pro
thanks again
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Mac OS X Lion 10.7.5 (11G63b)
2 x 2.66 GHz Dual-Core Intel Xeon
Memory 7GB 667 MHz DDR2 FB-DIMM
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          7 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          Not Available
Hardware UUID:          00000000-0000-1000-8000-0017F20F9F40
+++++++++++++++++++++++++++++++++++++++++++++++++++++
The only HD now
Intel ESB2 AHCI:
Vendor:          Intel
Product:          ESB2 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          3 Gigabit
Description:          AHCI Version 1.10 Supported
ST3250824AS P:
Capacity:          250,06 GB (250.059.350.016 bytes)
Model:          ST3250824AS P
Revision:          3.BQK
Serial Number:                      9ND1P4X7
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209,7 MB (209.715.200 bytes)
BSD Name:          disk0s1
Content:          EFI
HD INTERNO PRINCIPAL:
Capacity:          249,2 GB (249.199.591.424 bytes)
Available:          37,91 GB (37.914.918.912 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Content:          Apple_HFS
Recovery HD:
Capacity:          650 MB (650.002.432 bytes)
BSD Name:          disk0s3
Content:          Apple_Boot

NAS is of course external and depends on how you access it. And then t he ideal for RAID5 for instance woudl be WD RED series, but those do not work inside Mac tower.
Look up "TLER" regarding WD drives and RAID.
Apple does not endorse or anything, not in decades and when there were problems - G5 and early adoption of SATA and changing standards and features, it was users that did the troubleshooting.
So unles you are using Apple's PRO RAID card, which I don't think anyone would or should and which is limited to 2TB drives and only instance of a ceiling on supported drives (it is req'd for SAS though), use your own research.

Can I plug a 2.5" drive in a Mac Pro?

Similar Messages

Maybe you are looking for