Can I Point A Second Domain

I understand that I can use a domain name with my iWeb site on MobileMe, but is it possible for me to point a second domain name so that it works with the site also? If so how?

MobileMe allows only ONE domainname. With or without iWeb.
It's frequently discussed in the MobileMe forum.
To point a second domainname to a specific Site or page, use URL forwarding (with or without masking).
You configure that where you manage you domainname.
iWeb is not involved. It works with any webpage.

Similar Messages

Satellite A300-15M - Can I install a second HDD?

Hi there.
I own a SatelliteA300-15M. I bought the laptop 2 years ago. I have already 250GB hard drive which came with the laptop. Recently I got my laptop serviced from local shop. I noticed that it has an additional slot for another hard drive. I saw a post that some of the A300/A305 laptops have the space for second hard drive but not the connectors.
If anyone owns A300-15M can they please tell me if i can install a second internal hard drive in my model? Is there a sure way to find if I can really install a second hard drive?

Hello
> but not the connectors.
So the case is claer: If you dont have a second SATA connector, you cant install a second HDD.
Check also the forum regarding such questions. The point is that one notebook series (e. g. Satellite A300) is always equipped with the same case but the hardware is different. So not all models have the same features. ;)

Can I add a second account to Adobe Digital Editions

I have two adobe reader accounts. One for my family one for personnel use. The computer has my personnel account on it. I want to add the family account to add books to my wifes nook. Can not seem to find out how to do that

Hi manobird,
If you used one ID to install ADE, you cannot download an ebook from a site into ADE if you used a different ID. That's the way the Digital
Millenium Copyright Act of 2000 was implemented to prevent unauthorized copying of ematerials. ADE tells you that in its HELP section. You can't add a second ID to ADE either, for the same reason.
What you CAN do is to change users, and authorize ADE with the same ID you used when you downloaded the ebook. You do this by bringing ADE up, then using the CNTLSHIFTD key combination, you will deauthorize ADE. Close ADE and reopen it, and ADE should ask you to authorize it. At this point, you can enter the second ID, and ADE will take off from there. BUT, keep in mind that any other ebooks you downloaded into ADE with the first ID will not be accessible until you go through the same process again and revert to the first ID.
Hope this helps!

Can you point me to FrameScript samples that do some or all of the following? Or maybe even write the script for me for $$$? :-)

Hi,
I'm brand new to writing FrameScript. I'm looking for example scripts that I can piece together or perhaps you can give me a quote for your cost to write the script for me. Here is a description of basically what needs doing. We have .book files than contain say a cover.fm, multiple chapter.fms, and possibly multiple appendix.fms. (They actually contain more types, but I can expand the script for that.) I don't think here is a consistent way to automatically determine which .fms are of which type, so I was thinking of popping up a dialog box that showed the files in the book and asked the user to identify which files were of which type. This asking could be done all at once, or it could iteratively ask for the first type then run all the processing then ask for the second type, etc, etc.
The processing of each file goes like this:
1) Delete the paragraph and character catalog contents
2) Import all formats, including the new paragraph and character catalogs from correct template file (chapter.fm, appendix.fm, etc)
3) Remap the old paragraph and character tags to the new ones, preferably based on an internal predefined, hard-coded table, but possibly using the "use a remapping table that is in another .fm file" method. It's just that the latter method requires the user to open two more .fms in addition to the several other template files they'll already (correct?) have to have open.
4) Report to the user all tags that are in their file that are not in the new catalogs
Can you point me to pieces? Write the whole thing? Recommend someone who can?
Thanks,
Dave

Dave, if you haven't yet check it out, do visit the Framescript users group, here:
http://groups.yahoo.com/group/framescript-users/
There are several folks who do contract FS work who post their contact info as part of that group (I believe there's a webring also). Also, Rick Quatro has a good e-book "Crash Course" about learning FrameScript (although the book refers to an earlier version, almost all of the concepts are still applicable to the current versions of FS and FM) , check it out at
http://www.frameexpert.com
Sheila

Can I add a second Airport Express?

I have an Extreme Base Station connected to my Time Warner Cable Modem. It comes into my house in my office, which is over my garage, a separate structure in my backyard. The iMacs there are connected via Ethernet to the Apple Base Station. In my house, maybe 30 feet away, where I use two Macbook Pro's, iPhone 6, iPad 3 etc, all via Wireless, I have an Airport Express as an extender to amplify the signal because my house with it's lathe walls is a great shield. This works OK up to a point. The further away I get from the Airport Express, the fainter the signal gets.
Naturally, the farthest room away is my family room with a Smart TV, Apple TV, A/V receiver, DirecTV Cinema box, Playstation3 etc. I just added an Amazon FireStick TV via HDMI. It found my wireless network perfectly and joined. Problem is, it's buffering like crazy when I try to watch a movie and reporting "bandwidth too low". So I have a problem. I need to boost the signal one more time.
Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
If not, does anyone have any ideas?
Thank you.

Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
Sorry, but no. Even if it was possible, the speed loss would be amazing, and would really hurt, not help the current network performance.
Probably not the answer that you want to hear, but the only way to get the same signal strength and speed from your office to a location in the home is to run an Ethernet cable between the two locations.
There is no loss of signal or speed through an Ethernet cable up to 330 feet, or 100 meters. Good old Ethernet cable. Nothing comes close to a wire in terms of performance.
I faced a similar problem, and while the initial outlay to the electrician was significant, it has been the best investment that I ever made in terms of improving network performance....far better than the "improvement" with any new product, or any new router or any new technology that might have been available.
If you absolutely cannot run the Ethernet cable, then a pair of Ethernet Over Powerline (EOP) adapters might be able to send the Ethernet signal over the existing power lines in your office and home.
The theory with EOP products is that you already have the wiring in place.....you just need the adapters. Unfortunately, things do not always work as well in practice as the theory might suggest.......having the signal hop several different circuits would be one major challenge.....whether the office and home are on the same master circuit would be a question as well.
Given your situation, I would not even consider trying EOP adapters unless the store agreed to take them back within 7-14 days if they don't work well for you.

Can i put in second HDD into Satellite A300-1EG

Hello,
The question is can i put in second HDD to Toshiba A300-1EG notebook, there is a place for one as I found, and what HDD should it be, i mean 2,5" and etc?
As I read, there can be no connection for HDD, all depends on model, how can I found out?
Thanks.

Hi
You can check this yourself.
Remove the plastic cover which secures the second HDD bay.
If there are some HDD connectors then you could install an second HDD.
If the connectors are missing, then you will not be able to use second HDD.
I know its a little but confusing because of the second HDD bay but the point is that different A300 models supports different motherboards and not all motherboards are equipped with two HDD controllers.
Greets

How can I add a second authorized user to my installation of Adobe Digital Editions?

I have initially installed with one user. I have purchased a digital book using my credit card and id from Barnes & Noble. I can't open the content without proper ADE authorization. How can I add another user authorization to ADE?

Paul, if you used one ID to install ADE, you cannot download an ebook from
a site into ADE if you used a different ID. That's the way the Digital
Millenium Copyright Act of 2000 was implemented to prevent unauthorized
copying of ematerials. ADE tells you that in its HELP section. You can't
add a second ID to ADE either, for the same reason.
What you CAN do is to change users, and authorize ADE with the same ID you
used when you downloaded the ebook. You do this by bringing ADE up, then
using the CNTLSHIFTD key combination, you will deauthorize ADE. Close
ADE and reopen it, and ADE should ask you to authorize it. At this point,
you can enter the second ID, and ADE will take off from there. BUT, keep
in mind that any other ebooks you downloaded into ADE with the first ID
will not be accessible until you go through the same process again and
revert to the first ID.
Hope this helps!
=============

Where i can get the mobile phone domain name

i wan to send sms using smtp..!! i from MALAYSIA..!! where i can find these mobile company domain name , so that i can send sms using this domain name..!! [email protected]
pls guide me...

First create a MimeMessage addressed to [email protected] The session for the MimeMessage could point to either of the following SMTP server:
(a) Your local ISP's smtp server. e.g. If you're on a dialup account use the SMTP server you specify on your Outlook. That'll be the easiest way...
(b) Do a DNS lookup of type MX record for sms.celcom.com.my and use that server as the SMTP server.
Add content to your message and do a Transport.send( msg);!!
Hope this helps!

Can I configure two webserver domain in one windows server

Can I configure two webserver domain in one windows server with default port. ( i.e 80 )
For Ex:- http://server-name/psp/DOMAIN/?cmd=login and another one
http://server-name/psp/DOMAIN2/?cmd=login.
If not please let me know the workaround to do so. B'coz i don't want to put portnumber in my second URL..

Hi,
You can even have serveral domains within the same webserver instance.
During PIA installation (of the second) choose option existing domain and then add an additional site.
Give the domain a unique name and port to your second application server and you are ready to go.
I usually do this on sandbox environments to keep the sandbox small , with several databases (Portal, HCM, FIN, CRM) and one PIA with serveral domain.
But is definitely not what you should do for production systems.
Each application should have it's one PIA instance.
Hakan
I didn't read the port number requirement.
You can only run one webserver instance on a port number for example port 80.
But you can still have one webserver PIA with serveral domain on the same port number as described above.
Edited by: Hakan Biroglu on Mar 14, 2012 2:28 PM

Can I create a second service console in ESX 2.5.5?

Can I create a second service console in ESX 2.5.5?
Yes, I've done it in ESX 3.+, but I can't find/verify it's ok in ESX 2.5.
Any procedures, commands or comments welcomed.
ALL POINTS WILL BE AWARDED.

No you cannot - The service console in ESX 2.x actuallys loads before the vmkernel and has control over its own physical NIC and memory - In esx 3.x (vSphere) the VMkernel loads first and provides those resources to the service console allowing you to create multiple service console ports -
If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

Pointing my new domain name too my .mac homepage

Hi, please can someone tell me how to point my new domain name to my .mac account? I usually have to change DNS settings but I can't find them anywhere on this site.
Thanks

You may already figured this out, but I had the same problem and later learned that Apple will not provide a DNS number. I had to pay my domain host to forward my domain (aka "domain forwarding") so that someone typing in my domain is automatically forwarded to my Apple homepage. Even then, viewers will see the very long iWeb url in the domain/url field, and so to avoid that, you might consider paying a few more bucks to get "domain masking", which replaces the long winded iWeb urls with your domain. The only problem with that is no matter what page of your site the visiter is on it always says your domain (www.xxxxxx.com) in the domain/url field. Its a compromise, but at least you have the satisfaction of using your personalized domain name and the ease of use of Apple's iWeb system.
PowerBook G4 Mac OS X (10.4.3)

Setting up second domain at work. It tries to take over DHCP for both domains.

So I have an existing older domain (Server 03 r2) and it's working normally.
I'm setting up a second domain, server 08 r2. Each time I activate DHCP on it it begins handling IPs for both domains causing other issues related to DNS.
They are different IP Schemas. The existing functional is a 192.168._._. The new is internaly 169.254._._, and has a static IP for the other NIC and ultimately the internet connection. The internal networks exist on the same subnet mask for a level of crossover
for future data transitions.
On the 08 server I'm also having DNS issues. It works fine if I have both NICs plugged in, but not with just the external IP plugged in. It would appear it was giving out it's own domain IPs and getting it's DNS from the existing domain, which puzzles me
as all these items are set to static on the cards.
I would love any available help.
Thank you!

Do the same DHCP zones exist within the same switch or VLAN? If so, they're both going to offer DHCP to any device that requests it regardless of what domain that machine may already belong to. The first DHCP request that the device sees will
win. You can really only have one per switching segment.
For the DNS issue, when you say the existing domain, do you mean the 2003R2 domain? From a command prompt if you run ipconfig /all do you see the 2003 R2 server in there as a DNS Server? Do you see the 2008 R2 server listed? If you don't
see the 2003 R2 server, it may just be that you're getting results from a broadcast.
You may just need to split these two domains onto separate VLANs if they're not already.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Send Email using Second Domain with ActiveSync

Hello Apple Support!
Could you please help, we using 2x domains for our mail exchange environment.
1 domain is set as primary SMTP for mailbox, mailbox connected to Iphone with ActiveSync,
We have created possibility to send as using second domain with Distribution list in Microsoft Outlook.
Is it possible to get option on Iphone to Send As from another email address (second domain) with ActiveSync?
Thank you!
Best regards,
Oscar

Hello, Apple Support!
Probably it is not possible, if not, can you please confirm.
Thank you!
Best regards,
Oscar

Adding second domain controller in Windows server 2012 R2

Hello, our primary domain controller is currently on a machine that has Windows Server 2008 R2 Standard. We are planning to setup a second domain controller as a failover to our primary domain controller. My question is, can we have a secondary domain
controller on a Windows Server 2012 R2 even if our primary domain controller is on a machine that has Windows Server 2008 R2?

I think I found the answer to my question.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx
"In Windows Server 2012, Adprep.exe is integrated into the AD DS installation process and runs automatically as needed. For example, when you install the first domain controller that runs Windows Server 2012 into an existing domain and forest, then adprep
/forestprep and adprep /domainprep automatically run and report the results of the operations.
Some organizations may prefer to run Adprep.exe separately in advance of an AD DS installation. For this reason, Adprep.exe is also included in the \Support\Adprep folder of the operating system disk.
In Windows Server 2012, there is only one 64-bit version of Adprep.exe. It can be run remotely from any server that runs a 64-bit version of Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. The computer where you run it can be either
domain-joined or in a workgroup.
The version of Adprep.exe in Windows Server 2012 includes new syntax and parameter options in order to run it remotely. For more information, see
Adprep."
For more information about the objects and containers that are created when the schema is extended to support Windows Server 2012, see
Windows Server 2012: Changes to Adprep.exe.

How to add a second domain to BPC?

Hi guys
I need to add users from a second domain to my BPC setup.
The domains are completely unrelated (not parent/child or anything), so I need to know what I need to do.
I assume that I need to add a trust relationship in Active Directory, but are there any specific additions that I need to make to BPC (any entries in the database or anything like that)?
I can't find anything on doing this, so if anyone has any ideas (or better yet, if anyone has actualy done this before), please let me know.
Thanks

Actually, I just found something in the NW Ops manual, but need clarification:
DDIC Table Name:   UJA_DOMAIN
Remote Function Call:   UJ0_API_BPC_CONFIG_05
Configuration data included:   Supported domain
Table Fields:
MANDT u2014 SAP GUI Logon Client Number
GROUP_NAME u2014 The logic group of the system user
DOMAIN_TYPE u2014 Specifies whether the system is running in domain or work group mode
DOMAIN_NAME u2014 Name of the domain
READ_ONLY u2014 Indicates whether the value can be changed
So once the domains trust each other (I assume I can configure the usual 2-way transitive trust in this scenario),
does this mean that I can simply add entries to this table and BPC should allow users from the additional domain, or is there more to it than this?
Thanks again

Can I Point A Second Domain

Similar Messages

Maybe you are looking for