Can I print a document formatted for a smaller page size on larger paper?

I have a document that is formatted for a small size for a booklet using a customer paper size setup, 21 x 24 cm. I want to print this on A4 paper for proofreading. But when I do so, the printer (a Brother laser printer) spits out giant pages enlarged to A4. When I try to reduce the scale percentage, it reduces down to the right font size, but reflowed into the A4 size.
Is there a way to just have it print in its true size in the middle of the A4 sheet?

You could change the percent in File > Page Setup. But I think fruhulda's suggestion of using PDF would probably result in better resolution although any enlarging will likely cause some loss.

Similar Messages

Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine?

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

I'm getting a lot of 'Photoshop can not print this document' errors

Has anyone experienced / solved this problem? the error just reads 'Photoshop can not print this document.' with no further information. Flattening the document resolves the problem, but I would like to think that there is a better solution.
Thanks

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, what type and size of files you're working with; if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Elements 12, Epson Artisan 1430, "Photoshop can not print this document"

I recently upgraded to Elements 12 and also got a new printer, Epson Artisan 1430. I got some great prints and then one day, it stopped working. Elements error. No error number just a message, "Photoshop can not print this document" I tried restarting the program, the printer, and the computer. No luck. Tried different graphic files; no luck. The printer works with all other programs beautifully. I cannot find help anywhere on Adobe forum. Running Windows 7

John, I deleted the printer and deleted those folders and reinstalled the printer using the printer menu. When I tried the apple software update it said my software was up to date and didn't offer an option to get updated print drivers. I tried printing again and the same thing happened.
Syd,
I am trying to print from the Macbook to the Artisan entirely over a wireless network. The Macbook has not been plugged directly into the printer or to the router at any point in this. I did try what you suggested, resetting the printing system, and as earlier it did not offer any software updates when I looked for one. I tried printing again and the same result.
I dug around some more directories and found some more files with the epson name in there and deleted those and then attempted to reinstall using the printer setup page, and then again tried a software update and again it didn't find any new drivers, and of course the same printing error occurred again.
It sure appears that the MacOS is holding onto drivers somewhere that I cannot discover because when I reinstall the printer it takes it all of 3-4 seconds to install, and when I try to do the software update it is not finding any new drivers anywhere.
Syd, I agree that there seems to be something specifically corrupted about the printer driver itself, however, but is there another way to remove drivers?
Should I try uninstalling everything and attempting a USB installation to see if prints that way?

How can I print a document from "workspace?"

How can I print a document from "workspace?"

1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

How can I print a document on my iphone to a printer if I do not have an air printer?

How can I print a document/photo etc that is one my iphone to a printer which I use with my Windows computers? My printer is a Lexmark X4550 Wi Fi

Sorry based on this link IOS: air print 101 http://support.apple.com/kb/ht4356 your printer is not compatible.
You can take email yourself the photos and then print it out that way.

I can't print my document from Pages...the Print Button is down behind the Dock...and I can't click it to Print....healp!

I can't print my document from Pages...since the Print Button is lodged behind the Dock...What do I do?

Hi Judith,
Your Print button should be accessible, of course, but sometimes we can do things to confuse the system and we have to take some action to get out of that situation. This case sometimes arises if we change the resolution of our screen display since opening the app, or if we change the position of something that is set to "stay on top" of the display.
If the Dock is the problem right now, you could Hide it or Move it to a different edge of the display, to get it out of the way. Settings are in System Preferences, Personal, Dock. I usually have my Dock set to automatically Hide itself, so it's never in the way.
You could also try Saving, Closing and reopening Pages and see if that resets the location of the Print Dialog. Or, you could just hit Return rather than clicking on the button.
Jerry

Hoe can i print a document

Hoe can i print a document from my ipad2?

If you have one of the HP printer models that supoort AirPrint then you can use that : http://support.apple.com/kb/HT4356 . Otherwise you will probably need an app - some printer manufacturers have their own apps in the store or there are generic apps such as PrintCentral, Print n Share etc which might be able to print to your printer.

Using addresses, can you print duplicate mailing labels for the same address

using my address book, can I print duplicate mailing labels for the same name and address.

I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
You may not want to incue the expense but Microsoft Word will do what you want.

Elements 11 - when I try to print a photo, I get this message "photoshop can not print this document"

What do I need to do when I get this message? "Photoshop can not print this document"

Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays

How can I make lining number format for opentype fonts in Acrobat?

How can I make lining number format for opentype fonts in Acrobat?

I bought the Max OT font. I want the numbers on the right to look like on the left. I could do that in word, but not in adobe acrobat.

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

I can not print only a selected part of a page

I have reset the print.print_printer and still can't print only the selected part of a page. I highlight what I want to print and use control P to get to the printer setup. Then I click the selection button and then OK. The preview screen shows what would print but the page has blank space above what was selected. This has only started to happen since the upgrade to FF 11.0. I have tried the same operation using IE and it works fine. please, is there a fix for this??

Hi jweigh,
This is a known bug. You should take a look at this thread:
https://support.mozilla.org/en-US/questions/923294
See the last post by Cww.
Hopefully this helps!

How can I change a document from booklet to single pages

How can I change a document from booklet to single pages?

Very cumbersome.
How many pages?
Make a copy first.
In Acrobat use the Crop tool to crop half the width. (Pages > Crop Pages.)
For 11x17 to 8.5 x11 crop all even pages 8.5 left, all odd pages 8.5 right.
Do you have InDesign?
Create a new document correct to finished page size.
(Use Import Multi Page script to) Place all pages offset by the proper page amount.
Export new pdf.

Can I print a document formatted for a smaller page size on larger paper?

Similar Messages

Maybe you are looking for