Can I print before and after on the same page?

Hi everyone.
I'm really proud of my editing on a particular image. I want to print the before and after on the same page, just like I can see the before and after side-by-side in the Develop mode.
Is this possible?
Thanks for your help.

Yes but you will need to make a virtual copy by going to the menu:
Photo >> Create Virtual Copy
Then open copy 2 in the Develop module and from the history panel change the setting to the time of import (usually the bottom of the list) or use the re-set button to get back to the original file from camera.
You can then select copy 1 & 2 and go to the Print module to set up your page with both images.

Similar Messages

Everytime I try to pay with my cc on paypal, I enter all of my infor and after I press the "review and confirm" button the same page reopens but has erased only my cc #, exp date and security cvv number. What could be wrong?

b.stats.paypal.com : server does not support RFC 5746, see CVE-2009-3555
This appears on my error page everytime I try to use my credit card through paypal. I enter all of my info (billing, etc..) and after hitting the "review and confirm" button the same page reappears and has erased my cc number and leaving my name and billing info. What can I do to finish my transaction?

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".<br />
* http://wiki.mozilla.org/Security:Renegotiation
You may have a problem with the PayPal cookies.
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies
* [[Cookies]]
* [[Enabling and disabling cookies]]

Can WRT54G use WPA and WEP at the same time?

I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
Do I have to buy a 802.11g wireless print server? Or is there another solution?
I don't supposed the linksys router can do both WPA and WEP at the same time?
Connecting the print server to the router with a cable is not feasible. They are on different floors.

both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

Can you supply a link?

Using addresses, can you print duplicate mailing labels for the same address

using my address book, can I print duplicate mailing labels for the same name and address.

I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
You may not want to incue the expense but Microsoft Word will do what you want.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

Form and report on the same page...

Hi,
I want to have a form and report on the same page... as soon as user enters the information and submit the form via button then the report should be able to display the addition...
may I know how to accomplish this...
Thanks in advance

Hi
Can you try like this
1.First create an empty page and add a html region and template as form region and add the necessary fields to insert into table
2. create a another region with type as "SQL Query" and template as report region and add the necessary fields for the reports.
Once u entered the details into form region and created process and insert into table and then automatically the report region query will fetch the recently added row and displays in the report.
Hopes this might helps you.
Thanks & Regards
Srikkanth.M

SpryValidation and DependentDropdown in the same page

hi,
With "SpryValidation" and "DependentDropdown" in the same page
SpryValidation, on "Submit" event, doesn't work
Any solution??
Thanks
Gabriele

Hi Gabriele,
when checking some code located in some file in the "includes" folder, it seems that the onsubmit event is already "captured" by ADDT´s own clientside form validation routines.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How do I type Hebrew and English on the same page

How do I type Hebrew and English on the same page in Indesign?

What version of InDesign are you using? And on what operating system? Switching keyboard ("input methods") is in your OS, not in InDesign. InDesign has had the capability to display right-to-left languages since CS4, but only the Middle East edition has the abilities to actually manipulate Hebrew text. If you're trying to do a bilingual, bidirectional document, you'll need the ME edition. If you are a CC subscriber, it comes with your subscription; if you are not, you'll need to buy another version of ID, or a plugin that will allow you to access those RTL features.

How do I combine text and photos on the same page in iPhoto using photobook

How do I combine text and photos on the same page in iPhoto using photobook?

You mean while creating a book in iPhoto? Click on the layout button while viewing a page and select the layout that includes both text and photos. Most themes will have those options.
OT

An extra page prints before and after a page with the data, why?

If I go to www.allrecipes.com, select a recipe and click on the Print button, FF prints an extra blank page before and after the recipe. The recipe is short and easily fits on a single page. I've changed all the print settings so that even the Header & Footer info is set to "Blank".

I don't understand why blank pages are generated, but I can help you with a quick hack if you like. This will strip off everything but the actual recipe area so that you can streamline the printout.
After you load the page and select your options:
* Open Firefox web console using Ctrl+Shift+k
* Next to the caret (>) paste the following script then press Enter to run it:
var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]);
* Close the web console by pressing Ctrl+Shift+k again
When you preview the page, it should look ready for printing. Any luck?
Obviously that's not very convenient if you print a lot of recipes from this site, so you could save the script as a bookmarklet. Here's how:
First, copy this slightly modified script (select, Ctrl+c):
javascript: var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]); void 0;
Next, if you are not displaying the Bookmarks Toolbar, you can display it using either:
* right-click a blank area of the tab bar > Bookmarks Toolbar
* tap the Alt key > View menu > Toolbars > Bookmarks Toolbar
Right-click on the Bookmarks Toolbar and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., AllRecipes) and click Add.
Now, when you want to hack the page, click the button to run the script.

Can I print before and after on the same page?

Similar Messages

Maybe you are looking for