Can I print from my iPad 2 via a wireless router to a kodak printer

Is it possible to send a document from my iPad via my wireless router to a kodak printer.

It's possible with AirPrint. See:
AirPrint Information and FAQ: Apple Support Communities
iOS: AirPrint 101
If the printer does not support AirPrint then you may be able to activate it with AirPrint Activator 2.1b2 or Printopia 2.1.4.

Similar Messages

  • For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone.

    For no apparent reason, the printing from the iPad to the HP wireless printer was no more possible, while it was still possible from the iPhone 5. Any idea why?

    Gutenprint drivers are intended for non-laser printers. HP supplies the proper drivers, and you can download the latest version directly from HP's support site. Or you can install the most recent HP drivers provided by Apple.
    Printing speeds do not include the time it may take to transfer data to the printer. It also doesn't take into account the time it takes for the printer to be prepared to start printing. Color is much slower than B/W.
    Contact HP for any additional assistance you may need since these forums do not provide support for non-Apple products.

  • TS2755 My friend sends me photos from his iPad 2 via email. However, when he come to my iPad 2 inbox, the photos do not show up. Instead I get 20-some characters. What is wrong? Please advise.

    My friend sends me photos from his iPad 2 via email. However, when they arrive in my inbox on my iPad 2, the photos do not show up. I receive 20-some characters. Please advise as to the problem.

    Try sending them via the Messages app as opposed to E-mail.
    E-mail shouldn't normally be a problem, but Messages will do as a soloution.
    To do so:
    . You need iOS 5
    1. Go to your Photo Gallery
    2. Open up the album/ images you want to send
    3. Press the share button (top right hand corner)
    4. Select 'Send as Message' (not e- mail)
    5. Select your friends Apple ID from your address book for his iPad
    6. Voila!
    - it's something along those lines...... my iPad is downstairs atm, but the actual way of doing it will be similar...... !

  • I have an imac with IMAP email. have managed to partially sync up my ipad in that I can receive the same emails that appear on my imac but I can't send from my ipad.  Any ideas?

    I have an imac with IMAP email. have managed to partially sync up my ipad with it in that I can receive the same emails that appear on my imac but I can't send from my ipad.  Any ideas?

    That sounds like a settings issue to me. Check with your IT depatment to make sure you have it configured properly.

  • HT204053 I have an iphone4s and I just purchesed a new ipad. I can use face to face to call from my Iphone to my ipad but I can't call from my ipad to my iphone.

    I have an iphone4s and I just purchesed a new ipad. I can use face to face calling from my iphone to my ipad but i can't call from my ipad to my iphone on wifi.

    I have also discovered that they have moved the audio books storage on the iPad from iBooks app (Audio Books Collection) where they have been stored up until now and are now to be found in the iTunes app under audiobooks, selection on the bottom row. So much hastle why can't they just say so right upfront on Apple iTunes Audio books?

  • TS1702 Why I can't purchase from my iPad ?

    WWhy I can't purchase from my iPad ?

    Wow.  That could hardly be more vague.
    This is the iphone forum.  Post in the ipad forum and explain in far greater detail than "Why I can't purchase from my iPad ?"

  • TS3899 How do I get my list of contacts from Gmail to my iPad2 so I can send email from the iPad?

    How do I get my list of contacts from Gmail to my iPad2 so I can send email from the iPad?

    Take a look at this help site that I found by using Google ...
    http://support.google.com/mobile/bin/answer.py?hl=en&answer=138740

  • I have a question is there any way I can put music from my iPad to my iPod? Some one said to me yes by using a DRM

    I have a question is there any way I can put music from my iPad to my iPod? Some one said to me yes by using a DRM

    Would those work if I am using the 4g wifi hotspot on the ipad to get the music onto an ipod touch?  I am willing to give up third party music if this would work. Just not sure if it would work since the 4g wifi has that 50mb restriction

  • I have a data plan on my iPad? Can you tether from an iPad to a laptop for Internet connection?

    I have a data plan on my iPad? Can you tether from an iPad to a laptop for Internet connection?

    Yes if your iPad is a New iPad and you have a "hotspot" plan from your provider.

  • IOS8 no longer supports iPhoto. Does this mean I can delete iPhoto from my iPad?

    IOS8 no longer supports iPhoto. Does this mean that after migration to Photos I can delete iPhto from my iPad?

    Yes you can but you should first migrate your library photos as described in this Apple document:  Migrating from iPhoto for iOS to Photos on iOS 8.

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinking.  Thanks in advance for the help!

    If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
    Wired should be easier.  Just use a network cable to connect to the router.  Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings.  If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
    If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports.  Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb.  Join that network and, using the AirPort Utility, configure your AX as a network client.  Go to Wireless > Wireless Mode: Join a wireless network.
    Select your router wireless network from the drop-down menu, select the appropriate security and type in your password.  Click update.
    It'll restart and automatically join your network.  Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
    Let me know if this worked.
    Jorge...

  • Switched from DSL to CABLE. WRT54G Wireless Router stopped working.

    When I switched from DSL to CABLE, my WRT54G Wireless Router stopped working. I am not able to access the router page (192.168.1.1) Also, when I use the set up CD for re-installation, the wizard aborts in the middle saying it can not connect.
    I appreciate any help to resolve this problem.
    P.S. The router acts like a one-port wired router. 

    Here is my favorite method for resetting a router to factory defaults, and trying to get it working again.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • I have a e printer and thee printer is on the same wifi net work as the iPad, when I select print from the iPad the response is no printers. I can successfully email from my iPad to the printer. How can I make my iPad recognize the printer?

    I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?

    This printer has worked for me with out fail at my house.  I am traveling in an RV and am at the mercy of the RV Wifi.  I do not have access to the router.  The printer has been recycled a number of times as well as the Ipad.  The printer is set up and has access to the wifi.  It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer.  I was hoping there was some adjustment that could be made to the Ipad and Iphone.  I can email to the printer from both gadgets.  I will try to recycle the devices again.

  • Can I stream from my ipad to a Pc/Mac?

    I know how to stream movies from my Mac to my iPad (via AirVideo)
    But I want to be able to stream movies (the other way around) from my iPad to my girlfriends PC when i go round to her house, is it possible to do so with some sort of app?
    Thanks in advance.
    Rob

    Then perhaps I misunderstood this line with my poor Englsih.
    Currently, you can only stream media from Apple-sanctioned apps like YouTube, though Sadun notes that this field widens if you choose to jailbreak your device and install AirVideoEnabler.
    As the resident expert, would you tell us which apps to download and install on which device. I find it a bit confusing.

  • Can I broadcast from my ipad to multiple tvs?

    I would like to broadcast from my ipad to multiple tvs in the same room.  The goal is to present to a small group but have the same slides show on all the tvs at the same time so everyone can see easily.  I saw where you could buy multiple apple tvs, but it looked like this was so you broadcast different things to different tvs.  I would like to broadcast the same thing to all the tvs at once.  Any one have an easy solution?  Thanks!

    Absolutely!  You can use the iPrint app to print - get it and learn about it here
    Although I am an HP employee, I am speaking for myself and not for HP

Maybe you are looking for

  • Count total rows in database?

    Hello all, Is there a way to query the database for the total number of rows.... without using ANALYZE STATISTICS? (That would cause the db to sometimes use COST instead of RULE based optimization, slowing it down significantly.) I know I could could

  • Photoshop Elements 8 compatibility

    Is Adobe Photoshop Elements 8 compatible with Windows 8?

  • Do we document BOM information for each item in BR100 for BOM?

    Hi, I'm working on BR100 for BOM. I noticed that in BR100 BOM template there is not a section for the documentation of BOMs for each item. I wonder if the standard is not documenting any of that information in this document? Thanks a lot, Robert

  • Problems compiling and running 9i forms on 10g Linux app server

    Hi all, we are about to move our 9i developed forms application from W2k 9ias RL2 to a 10g linux application server. It seems that we are having very much trouble with the fact that file names are case-sensitive under linux. Our forms are designer-ge

  • Oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the

    I have developerd a OAF and deployed in apps. When i am running that page it gives me error oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[0]. and hides the Lines region. when i refresh (F5) the p