Can I print separate layers on the same page?

I have a 10 page 3.5 x 9 booklet that I need to print. Each page has it's own layer.
I need to print out mockups of it and I'd like to be able to fit 3 layers to a page so I don't waste a ton of paper. Is there a way to do this?
Thanks!

You can show or hide whatever layers you wish. if the "pages" are stacked on top of each other you'll need to move some to get them to print together.

Similar Messages

How can I print multiple photos on the same page from iPhoto?

I want to print multiple pictures on one paper. How can I do that from iPhoto? If I select multiple photos they are printed on separate pages.

Select the photos and click print - select the printer, paper size and print size (be sure that they will physically fit on the paper) and click customize - on the resulting page click on the settings icon - the gear looking thingy at the bottom - and in the selection window set print multiple photos on a page - the preview should reflect this change - and click print again to continue
LN

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

I can not open new tabe in the same page

i can not open new tabe im the same page
when i click on new tabe , it donsnt open at all

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I think you are talking about grouping objects.
1. They must all be floating objects
2. Command click on each in turn
Menu > Arrange > Group
Peter

Can I print multiple copies of the same picture on iphoto 9.5

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade. Can anyone see how to do this now?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

When I print multiple photos on the same page, the prints come out different.

I have printed several copies of the same photo, 2 to a page. The 2 copies are different. One seems to be before adjustment and one after, so the exposure appears different. My printer is a Canon pro9000. Can anyone tell me what I am doing wrong?
Thanks!

If you print the photo (2 to a page) twice separately, i.e. not 2 copies of the same setup in iPhoto, are they different?
Try this: in the Print menu use the PDF button and select the Save as PDF option. Then open the file in Preview and print the 2 copies. Do they look the same? If not then the problem may lie with the printer not maintaining the same settings from one print to the the next.
OT

How to get Report Builder to print a section on the same page

I have a section of my report that is three bands. A header
band, the detail band, and a total line band. Sometimes this
section will get split up and print part on the next page. So
basically I need for this section to print on the same page. I know
that I could insert a page break right above the header, but this
will make my report way longer than it needs to be. I have also
unchecked "split allowed" for that band also but that didn't make a
difference. Is there some way to group three bands together so that
if it is two big to print the section on the current page then
print the whole section on the next page. It is driving our
accounting lady nuts because when she likes to verify that the
totals are coming out right and sometimes she has to flip over to
the next page to continue calculating.

you need to create a multi-instrument in the environment next to your audio-instrument,then push a cable from there to your audio-instrument.in the arrange window your multi-instrument will appear in the window where you select the track-type next to the audio tracks, audio-busses etc. these midi tracks now trigger your vsti on the selected midi channel.you have to record your midi now on these tracks and not on the audio-instrument track,because there you only trigger its own channel. i hope i explained it well but i think you have understood what i ment.

TS1702 I can't start any apps in the same page

I can't start any apps in the same page

Fair enough. I am new to this.
The soution to failure of opening Apps after IOS 5.1.1 update in my new IPad is to:
1. Erase all content and setting in general setting
2. Reinstall Apps using ICloud backup service.
Hope it helps others with similar software bug in IOS 5.1.1

How can I ensure newer versions of the same page are opened every time I visit

I am advised by my Uni IT screen to ensure that firefox is set to check for 'newer versions of the same page with every visit to the page'. This is to ensure proper functioning inside the University's internal tutorial program.

# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it and change its value to '''1'''
http://kb.mozillazine.org/Browser.cache.check_doc_frequency

How can i print multiple sheets at the same time

im trying to print multiple sheets out of a particular folder in numbers. Cant i just select all and print? When I try to the message that appears is that there is an error printing

If I guess correctly, you are trying to print thru a printer icon installed on the Desktop.
At last on my machine, iWork applications aren't compatible with this scheme.
Here is a script which may be useful.
--{code}
--[SCRIPT print_iWork]
Enregistrer le script en tant qu'application : print_iWork.app
sur le bureau
Glisser déposer des icônes de documents iWork sur celle du script pour imprimer ceux-ci.
--=====
Save the script as an Application : print_iWork.app
Drag & Drop icons of iWork documents on the script's icon to print them.
Yvan KOENIG (VALLAURIS, France)
2011/05/08
--=====
on open (sel)
local les_documents, un_doc, doc_ID, theApp, nom_du_doc
my activateGUIscripting()
set les_documents to sel
repeat with un_doc in les_documents
tell application "System Events"
set doc_ID to type identifier of disk item (un_doc as text)
end tell
if doc_ID is in {"com.apple.iwork.pages.pages", "com.apple.iwork.pages.sffpages"} then
set theApp to "Pages"
else if doc_ID is in {"com.apple.iwork.numbers.numbers", "com.apple.iwork.numbers.sffnumbers"} then
set theApp to "Numbers"
else if doc_ID is in {"com.apple.iwork.keynote.key", "com.apple.iwork.keynote.sffkey"} then
set theApp to "Keynote"
else
set theApp to ""
end if
if theApp is not "" then
tell application theApp
open un_doc
set nom_du_doc to name of document 1
end tell
my raccourci(theApp, "p", "c")
my raccourci(theApp, return, "")
delay 1
tell application theApp
close document nom_du_doc without saving
end tell
end if
end repeat
end open
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}

Can't print a graph on the whole page in landscape

Hello!
I have XY graph that I want to print on the whole page in landscape orientation (paper A4).
On the screen the graph is small, so I do resizing, appending image to report, and then printing.
After sending it to the printer I get preview (from the printer software) and see that the graph uses only approx. 5/6 of the page in the width, in other words the height of the graph takes the whole height of the page (21 cm) and the width of the graph leaves 5 cm of the page unused.
I tried to change the width and the height of the plot area to get proper ratio, but in vain.
If I set the height of the graph too large it goes beyond the page, but whatever I write to the width I always get 5 cm of the page unused on the right side. (not including 1 cm of the margin).
Note: surely, if you set small width you can get more space of the page unused, I'm talking about increasing the width of the graph.
Any ideas?
See attached for the vi. I tried to save it for 7.1 version but it can't, so you'll need LabView 8.0 to check it.
Also in attached you can find the page preview I get before it goes to printer.
Thanks in advance.
Rashid.
Using LV 8.0 Pro on WinXP with printer Canon PIXMA iP1000 (also tested on HP printer, but I think it doesn't matter).Message Edited by Rashid on 06-06-2006 07:09 AM
Attachments:
Graph printing out.vi ‏40 KB
Report preview.png ‏48 KB

Rashid,
It could be that you would need to install the entire LabVIEW 8.0.1 update rather than just the updated Run-Time Engine (RTE). Here is a link to the 8.0.1 update. If you download and install this version, you can then use the utility to mass compile or compile when you are prompted.
Repost if you have more questions!
Andy F.
National Instruments

How can I print a label on the last page of the report in the margin

I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;

user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works..

Can Acrobat create a PDF using the same page numbers as FrameMaker?

I'm using FrameMaker 10 on Windows 7 and Acrobat Pro 9. I know I can set the page numbers after I create the PDF (Advanced > Document Processing > Page Numbering), but is there any way to tell Acrobat (or Distiller) to do this automatically based on the page format set up in FrameMaker? Right now, the cover and inside cover have no page numbers, but I could assign them numbers and hide them. The TOC is lower case Roman numerals, and the rest of the book uses Arabic page numbering. Someone has asked whether we can have the page numbers be reflected in the page field so that when you enter page 10, it takes you to page 10 of the book (where 10 appears in the corner of the page), not the tenth page of the PDF, which might land you in the TOC.
We produce PDFs as part of an automated system, which is why I can't mess with it after it's been produced.

There is a FrameMaker plug-in that can do this:
http://www.frameexpert.com/plugins/pagelabeler/index.htm
Or, you might consider using PDFMark to add page labels.

Can I print separate layers on the same page?

Similar Messages

Maybe you are looking for