Can I print several different pics of the same size on one shee of papert?

Hi,
I should like to print a group of several different pics of the same size & resolution on one sheet of (A4) paper eg 6 family photos. There doesn't seem to be a template for this - just two choices of format (both with one large and a few smaller format) and there is no 'Printer' pop up menu.
I tried to laboriously copy pics to a two column works word processing document (after resizing in a different one so that they would fit in the columns). This is time consuming and when down sizing the pics lose resolution!
Maybe I can download templates somewhere on the apple site as suggested by apple care but I couldn't find out where. Maybe there is a possibility of doing some contact prints?
Any help much appreciated - many thanks - John

Select the 6 photos you want printed in the iPhoto Library or Album window.
Choose File->Print.
In the Print dialog box, Select the paper size in the Paper popup menu.
In the Style popup menu, select N-Up.
In the Photos per page popup select 6.
The preview should show what you'll get. I hope its what you wanted.
Message was edited by: Thomas Emmerich

Similar Messages

When i connect my mac book pro to an external display using a VGA cable and adaptor, the external display splits into several different columns of the same screen overlapping one another. Does anybody have any ideas as to why this happens?

I have used different VGA to mini port adaptors, different VGA cables and connected them to different external monitors and prjectors but the same thing happens. I am starting to think there may be a problem with the macbook itself however, when i have used a HDMI lead and adaptor to external monitors the external display is fine.

Hi there LDIMERY,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Can I print 2 different reports for the same execution?

Hello all,
I currently have a test sequence that branches off into several subsequences, which branch off, etc. Currently, I have the report options filter out to only report 'pass' or 'fail' results. Even with this, my report is 90-100 pages. This is a good, very detailed report.
However(you knew there would be a 'however'), some people want a condensed version of this report, where it only lists whether the sequence itself failed, and not the individual steps within.
My question is, can I run my test and have both the detailed and compact reports run for that execution? Either that, or simply list if each sequence passes, and if it fails, then display the individual steps?
Either way would work for
me.
Thanks in advance for your help!
Dave Neumann
[email protected]

Hi,
As far as I know, TestStand does not include a built in feature to do what your are looking for. However this doesn't mean you can not do what your are looking for.
Like Zvezdana mentioned, you can either use the dll or sequence files to generate reports and you have to modify either of them to achieve what you want.
The dll generates de report faster that the sequences, however, the sequences are easier to modify. You can select the option you want from the Report Options.
If you select to use the sequences, there are two sequence files that would be called depending on the format you choose for your report. reportgen_txt.seq or reportgen_html.seq
They are located under ...\testStand\components\ni\models\testStand models\ Coy this to the
user directory (same path as above but user instead of ni) and make the changes that you need.
For your second option (only printing the details when a step fails) you can start with AddSequenceResultToReport sequence. This sequence has the code that inserts the begin and end sequence markers. You can getrid of them and this will make your report smaller. You can replace that with code that includes if your sequence passed or failed. Look under parameters for the result property. In this sequence there is a call to a subsequence that adds all the results of all the steps within the sequence. You can add a precondition to this step to execute only if the sequence failed.
There are many more things that you could do, but I hope this helps you get started. If you have specific questions once you start doing this, let me know.
I hope this helps,
Marcela.

Using addresses, can you print duplicate mailing labels for the same address

using my address book, can I print duplicate mailing labels for the same name and address.

I checked the Address Book Print Dialog and I did not see the option to duplicate a single label.
The only thing you could try is to select the name in your list. Then do Command-P to print which should get you to this dialog box:
Try changing the # of copies and see if that does what you want. Otherwise I'm not sure and your answer may best be found in the Address Book forum on here.
You may not want to incue the expense but Microsoft Word will do what you want.

My iPhone is merging different contacts with the same firstname into one contact. How can i resolve this.

My Bosses iPhone is merging different contacts with the same firstname into one contact. How can i resolve this? He seems very disturbed and thinks i don't know what i'm doing. I've set up all his devices to sync across and now its messed up on his iPad, and two iPhones.
E.G Contacts with firstname 'Adams' and different numbers are synced into one account.
Now i have no clue how many contacts are this way cos he has a huge number of contacts (he's the ceo).
Please i need a suggestion on how to fix this.
Thanks for the help.

Janie Mac wrote:
Cannot find settings to then go to general then about.
How do I edit the device in iTunes?
Double-click on the name.
My screen shot shows both devices because I sync wirelessly. Right now I can change the iPod name but not the iPad name because the iPod is idle while the iPad is syncing. In another minute or two, I'll be able to change the iPad name.

HT204380 Can you FaceTime two different people at the same time?

Can you FaceTime two different people at the same time?

No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

How Can I generate 2 different WaveForm in the same time

Hello,
I use a NI 6733 card and measurement studio 8 with MFC class.
I would like to generate 2 different waveform in the same time on 2 diffrent analog output channel.
I would like to know how can i do that bescause I succeed to generate one wafeform on one channel but not the second.
I would like to create 2 task one per analog output channel and waveform and launch the task in the same time.
I use the buffer FIFO and I think I have a probleme to share the buffer between the to different channel.
thank you for your attention.

Hello,
This corresponds of the third case detailed in this KnowledgeBase. You have to use one task with two channel, and feed it with your two independant waveforms (at the same sampling rate).
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

[JAXB] Several different prefixes for the same namespace

Hi!
I have generated some code from 2 schemas using JAXB. One of them (the main) defines some elements and the other one defines values for those elements. Then, when runring my code, I get an XML document with elements from the main schema an elements from the other one. However, elements from the second schema are qualified with different names. That is:
<party>
<ns3:uid xmlns:ns3="http:/schema1.com/schema1">CN=User1 - RSA/RSA,OU=IAIK,O=TU Graz,C=AT</ns3:uid>
<ns4:role xmlns:ns4="http:/schema1.com/schema1">client</ns4:role>
</party>
As you can see, I get two different prefixes for the same namespace.
Could you be so kind as to tell me if there is a way of getting only one prefix for each namespace, please? Do I have to modify JAXB compiler's properties???
Thanks a lot in advance.

No, I don't know how to do that. I also don't think it should matter. Are these multiple prefixes causing you any problems other than offending against Occam's Razor?

HT4059 I currently use ibooks on my iphone 4s... I want to be able to send several pdf documents at the same time in one email, I thought there was a way to do this? Can you help please?

I currently use ibooks on my iphone 4s... I want to be able to send several documents at the same time in one email, I thought there was a way to do this? Can you please help?

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Can iTunes from 2 different computer use the same library? (from wireless data storage device)

I purchased a wireless data storage device. My iTunes content will be moved there and I'm planning on moving my wife's iTunes data to the wireless device. Can both our iTunes share the same library?

One Apple ID can be shared for store purchases. On the iPhone go to Settings>Store and put in the ID. Then all the songs purchased with that ID can be downloaded from the iTunes store on the phone.
I hope that is what you were asking?

How Can I replace an image and save the same size as the previous?

I want to replace an image in a PDF, but I would like to keep the same size, and location as the previous. I have tried to to it, but the new image takes a different size.
This is a PDF exported from an InDesign template.

Thank you.
The problem is that the person to edit the PDF doesn´t have ID and doesn't know how to use it.
The idea is that the design department create very sharp ID templates for people from other departments of the company only have to replace information (text and image).
We are looking for a program to edit PDF files and function as templates forreplacement information.

ITunes 12 is making 1 album become several different albums with the same tracks. How do I combine them again?

I had an issue in past versions of iTunes, where I would rip a CD and, for some reason, iTunes would turn it into several different CDs instead of just one, even though everything about the album was the same (as in same artist, same album name, same year, etc). It seems as though that issue has returned and one album with 6 tracks is now 3 albums (1 album has 1 song, another has 2 and the third has 3). Yet, it's all the same album. I re-entered the data for the album name and artist, but it doesn't work like the previous versions. Anyone have any ideas why this is happening (other then bugs) or how to fix it?

Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group of identical tracks to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. This can happen, for example, if you start iTunes with a disconnected external drive, then connect it, reimport from your media folder, then restart iTunes.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background. Please take note of the warning to backup your library before deduping, whether you do so by hand or using my script, in case something goes wrong.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

How to print three different Barcodes in the same line

I am trying to print Barcodes for three different fields in a single line, it is taking the combined one & printing only one barcode for all those three fields.
When I tested it by printing them in diff lines, it is working fine. But the requirement is to print all fields in the same line

Hi
Look at this , may be useful
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
<b>Reward points for useful Answers</b>
Regards
Anji

Can there be several Sieve rules for the same match?

Following up with my other question, here's a more specific one: can I have several working Sieve rules matching the same attribute values? Or does processing stop on the first match?
Also, is there supposed to be a toggle/flag that specifies whether a certain rule should be the "last" (if it matches, whether to abort processing or to do whatever action specified in this rule and go on to the next rule).
I believe it is possible to write up complex Sieve scripts and save tehm to LDAP, but that's not so user-frienfly for just anybody to do ;)
So the main usecase for this question concerns the Sieve rules defined by a user in his or her Options tab.

JimKlimov wrote:
And how exactly does fileinto work? Does it happen once or more?Multiple fileinto actions to different folders results in a "copy" of the email in each folder, e.g. if I use a filter which has fileinto "Inbox", fileinto "Sent", fileinto "Trash", I get the following logged:
24-Jul-2008 09:49:42.67 ims-ms                    D 1 rfc822;[email protected] shjorth+Inbox@ims-ms-daemon mailsrv ''
24-Jul-2008 09:49:42.67 ims-ms                    D 1 rfc822;[email protected] shjorth+Sent@ims-ms-daemon mailsrv ''
24-Jul-2008 09:49:42.67 ims-ms                    D 1 rfc822;[email protected] shjorth+Trash@ims-ms-daemon mailsrv ''I say "copy" because each email is actually a hard-link so the storage usage from the 3 copies is actually the email size + size of two hard-links. So for the email above, these were the messages on disk:
Inbox:     613067 -rw-------   3 mailsrv mail         591 Jul 24 09:49 124.msg
Sent:      613067 -rw-------   3 mailsrv mail         591 Jul 24 09:49 11.msg
Trash:     613067 -rw-------   3 mailsrv mail         591 Jul 24 09:49 122.msg613067 is the inode number which as you will note is identical across the messages on disk.
From the RFC I infer that it should happen once for any one folder, but that probably doesn't mean one filing for the whole mailbox, right?Correct.
If I have "rule1" which files some messages into a folder (without a "stop;"), "rule2" which forwards emails, and "rule3" which files all messages to the inbox, am I supposed to still get cloned messages (inbox and subfolder)?If all three actions are performed, yes.
Regards,
Shane.

Can I print several different pics of the same size on one shee of papert?

Similar Messages

Maybe you are looking for