Can I programmatically calibrate the PXI-4060 using VisualBasic and Component Works?
I nned a function similar to the NI-DAQ Calibrate_E_Series funcition, aka CalibrateESeries function in the DAQTools control.
Dear John,
Thanks for using the Developer Exchange.
There is no self calibration function for the DMM because it is a extremely precise device (24 bits of resolution). So in order to calibrate the 4060 will have to use an extremely precise external voltage source. Only Calibrators instruments can source this kind of voltage. If you want to calibrate your DMM you have two options:
1 - Send the board back to NI once a year
2 - Use the Calibration Executive to perform in-house high precision calibration.
You can find more information about the Calibration Executive in the following web page: www.ni.com/support/calibrat/autocal.htm
Best Regards
Omar De Andrade
Applications Engineer - Computer Based Instruments
http://www.ni.com/support/
Similar Messages
-
Can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen?
can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen? via CPU or other devices?
There is no way to calibrate the touchscreen.
Just what problem are you trying to solve? -
I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?
I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.
-
My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?
http://support.apple.com/kb/HT1212
-
How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.
Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though. -
I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296 -
When I click on iPhoto(9.5.1) i get "To open your library with this version of iPhoto, it first needs to be prepared." but i downloaded the up-grader, used it and it tells me the library can open with the current version... Then when I click on the iphoto again i get the same message "To open your library with this version of iPhoto, it first needs to be prepared."'
What should I do?The upgraded is only necessary for libraries created with iPhoto '07 or eearlier. Just double click the library to open it in iPhoto, and let it upgrade, if it has been created by a newr version.
-
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?
Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur. -
I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain. What can I do so that I can connect other devices to my Wifi?
Read the router's user manual on how to change your password.
If you are going to select another password, make sure it's one that you will NEVER forget AND no one else can figure it out. Print it out & keep in a safe place. A place that ONLY you know about AND never forget. -
So can i Recover to the factory setting using F11 with no disk ?
So can i Recover to the factory setting using F11 with no disk ?
This question was solved.
View Solution.Hi,
If your Recovery Partition is OK, then you should have no problem with this method.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I can not connect to the app store using my iphone 5
I can not connect to the app store using my iphone 5. When I first got it I was able to-but not since???
Please helpCome on guys. Help me out. When I click on the app store icon, it'll just go to a blank screen. The only time there is anything on the screen is under the updates tab. Then it just says no updates found. I can not browse apps or search for them. It just goes to blank screen
-
I can't even switch the wifi button to try and connect to my wifi at home but my iPad still uses the wifi just fine.
Thank you, I am trying to last option now. Resetting my network settings and if that still doesn't work ill have to go in to the apple store. Hopefully I won't need a new phone because I'm already at my limit with replacements on my AppleCare even though the issue with the phones 3 out of 4 times wasn't my fault and I can't afford to buy another phone.
-
TS1398 I can't connect to the internet while using wi fi on my iphone 4S.
I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.
LeeinSunnyIsles wrote:
I can't connect to the internet while using wi fi on my iphone 4S. I can connect on my computer and on my IPad but not with my iphone. I have tried everything. Once or twice it did connect but then disconnected immediately. I have tried everything.
If you have truly tried "everything" then there is no hope of it ever working again. However, have you tried rebooting your router?
Have you tried Settings/General/Reset - Reset network settings?
Maybe you are looking for
-
Security message on exporting grid to excel from webpage
I am exporting data to excel from grid on a webpage. I have written following code: gv.DataSource = resultlist; gv.DataBind(); Response.ClearContent(); Response.AddHeader("content-disposition", "attachment; filename=Test.xls"); Response.ContentType =
-
Re: Creation of Pipeline Purchase Order or Consignment
Hello all, Can you all explain me how to create Pipeline Purchase Order or Contract., so that a proof of document is maintained. How is is done in SAP? Regards, Smitha
-
MSN now social api link doesn't work
The link to MSNnow from https://support.mozilla.org/en-US/kb/add-social-features-your-browser doesn't work for me. Is that a problem by msn or do I make a mistake there?
-
I bought a used Pismo laptop about 3 years ago. It had Tiger installed, but not OS 9.x. I recently noticed that the firmware had not been updated (you're supposed to update prior to installing OS X). I thought that I would update the firmware by inst
-
Price flow into the Purchase order
Hi Gurus, I have created a new material ( HALB ). I created a NB PO as well as STO PO. Please let me know as to how the price would flow into the above PO's. Thanks.,