Can I publish both an .ibooks file and a PDF of the same title to iBookstore?

I created a multitouch book in iBooks Author that I want to publish to the iBookstore. If I publish it as an .ibooks file, it has all the awesome multi-touch functionality for iPad, which I deifnitley want. However, .ibooks books cannot be read on the iPhone. I also want the book to be available through the iBookstore in a format that can be read on iPhone.
Can I publish my title as a PDF of the book IN ADDITION to the .ibooks version, and have them both available on the iBookstore?

While there are PDFs available, they tend to be Apple's own content, I think.
If one will do, you don't need two.
This question has come up before, so I'll just repeat my original response. If the two versions are the same, and you're sincere about a desire to support iPhone & iPad, just do one epub.
If the iBA version for iPad is different, then they are not the same and you have two books so knock yourself out.
Users may be confused if you manage to get two of the same in the store, and they don't know which to buy or buy one and then find out they wanted the other....this is why I'd expect pushback from Apple during review if you even tried.

Similar Messages

  • Can we have both IFS 1.0 and 1.1 on the same machine? (eom)

    -

    Yes, with the following restrictions:
    1. iFS 1.0 can only access a 1.0 schema
    2. iFS 1.1 can only access a 1.1 schema
    (that is, the 1.0 and 1.1 software cannot access the same files/ifs schema; you must have two different iFS schemas created on the database)
    3. iFS 1.0 can be running at the same time as iFS 1.1 only if the iFS 1.0 protocol servers (including JWS and the JWS admin service) are configured to use different ports than the iFS 1.1 protocol servers.
    4. only ONE SMB server may run -- EITHER the iFS 1.0 SMB server OR the iFS 1.1 SMB server, because the SMB port is not configurable.
    5. you must have a lot of RAM :-)
    Note: you can use the same database for both iFS schemas. You can also install both versions of iFS in the same ORACLE_HOME. iFS 1.0 will be located in $ORACLE_HOME/ifs and iFS 1.1 will be located in $ORACLE_HOME/ifs1.1

  • Can I use BOTH Verizon DSL Wireless AND DISHnet Wireless at the same time?

    Waiting for Dishnet contract to die and rot away but about 2 months to go.  Want to get with Verison Standard DSL Wireless as no data cap tho slower.
    I can just wait till Dishnet dies and keep bumping into data caps with the Dish service OR can I get the DSL setup and use one connex for the iMac and one for the iPad without any conflicts?
    I am so ignorant of technology that I see a Swing-a-Way hand crank can opener as a marvel of industrial magic,....so please talk simple words to me, :-) 
    Thanks
    DH

    Sign up for the fastest DSL package that you can. Even if the overall speed is slower, the fact that you won't be going over a satellite connection anymore should make the Internet *that* much faster. The Wireless Gateway should come included.
    You can use both services at once, although note that determining how you plan to use both at the same time is going to be another story. Some people use Dual WAN routers (as in, routers that accept two Internet connections and can balance between the two). Others will use the connections separately, by moving devices between the two connections as needed.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Can I use both a credit card and gift card for the same purchase?

    I want to buy a movie, (14.99) but I only have 14.98 in my account. Can I pay the 14.98 with my account balance and then charge the .01 to a credit card?

    Can I pay the 14.98 with my account balance and then charge the .01 to a credit card?
    Yes. That happens automatically when a purchase is made that exceeds the account balance or can't be made with gift card money and a credit card is set up.
    (44860)

  • I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
      I would try to find a copy of Final Cut Express perhaps.
      Does this answer your question?

  • I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

    I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

    Camera Raw plug-in | Supported cameras  I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

  • Can I use an iPad, iPad mini and iPod touch on the same apple account?

    Can I use an iPad, iPad Mini and iPod touch on the same account?  Is there a limit to how many devices I can use?

    When you turn on your iDevice for the first time just sign in with the same Apple ID and you can download any apps you have purchased in the past! There shouldn't be a limit to how many devices you can use.

  • How can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    how can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    Plug the phone and iPad into your computer and sync them.

  • Can Motion 5 replace a green screen and blue screen in the same shot?

    Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.

    Fox gives a good example for keying green & blue (or any other color)  from the same shot. I'd suggest doing a few things to get better accuracy.
    First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness.  It also will remove spill based on this color.  Looking at Fox's example movie and the shot, I'd approach the same shot this way:
    Remove the Blue
    1. Apply the keyer and set the strength to zero.
    2. Use the Sample Color tool and select the blue (or other color) to be removed.
    3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
    4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune.  Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
    Remove Green
    It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
    With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend  having the Color Selection open so you can see the graphs.  These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools.  Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change  more than the tolerance selection.  Observing what is happening in these graphs will help you figure out wha to change and speed things up.

  • How to?? show smartform and generate pdf at the same time

    hi experts,
    how can i show the smartform and generate  a pdf at the same time?? i have a control parameter gtotf in X and i generate the pdf but i want to show the smartform at the same time??
    thx in advance

    Hi...
    call fm <sf function name>
    exporting...
    importing..
    tables..
    now in the outputparam set the getotf as 'X'.
    call the same FM again and get the otf data.
    call fm <sf fm name>

  • How can I extract both my mp3 file and its associated .jpg out of itunes

    Hi everybody,
    I'm a DJ and once a month, I like to share a set of mine with my friends. For each set, I also make a dedicated flyer.
    I usually put the recorded set in Itunes, then I add the flyers using the "Illustration" (I'm using a French version) tag.
    Then, I drag the new file (both the .mp3 and .jpg) on a folder on my computer and I can see the flyers and not the normal Mac icon for music file.
    I had always worked, but today I tried to do the same but it doesn't work anymore. In Itunes, my mp3 file contain the flyers, but when I drag it to another folder, the flyer is not there anymore.
    What happened???
    does anybody know a freeware to associate a mp3 with a .jpg?
    Thanks for your help,
    Have a nice day
    Jean

    Bonjour.
    I'm not firm with the french iTunes but I'm sure its similar to all other iTunes in the world, except the language of the menus.
    You can include the cover (Illustration) inside the music file. mp3, AAC or Lossless makes no difference.
    To do so go to:
    The song (or songs) by marking it (them) in the main iTunes window. Then right click mouse (or two fingers on touchpad) and choose "Information"
    In the information window go to the tab called "cover"
    Move the wanted picture via drag & drop into this window. The best format for such illustrations are 500 x 500 pixels. If yours are bigger then iTunes will resize it to fit.
    Click on save
    If you will change the cover for more than one file (song) you will be ask "you are sure to change all files"
    Simply press ok
    After that the cover will show up in iTunes and will be exported within the file if you pass the song to others..
    There is no reason to place the cover / Illustration in the Music folder cause iTunes uses for imported covers the "Album Artwork" Folder in the Library.

  • How can I create a link to a pdf file and show it in the same webpage or in a new tab

    It is no problem to create a link. But the formats are limited and  - unbelievable -  the pdf format is not supported??!
    Where are the parameter (_blank or _self) to show it for example in the same webpage or in a new tab??!

    PDF is media.  It is not a web document.  Your end users must have plug-ins and helper apps installed on their device to see PDFs in browsers.  Depending on their settings, the PDF file may or may not launch in the browser window.  On my system, PDF files download and launch inside Acrobat Professional; not my browser.
    The safest approach is to provide a screenshot on your page with a direct link to the PDF file so people can handle it as they wish.  See example:  http://www.adobe.com/manufacturing/3dpdfsamples/3dsolutions/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

  • How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

           how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.  If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

  • Various problems when trying to use both my iPhone 4 and iPhone 5 at the same time? HELP!

    I am experiencing a wide range of problems with both of my iPhones. They are both a 4 and a 5. I will list the problems I am having.
    Using both phones:
    A few weeks ago I recieved a new phone, the iPhone 5 as my contract was renewed. I backed-up my old phone, the iPhone 4 to my computer and restored it onto my 5. But when using my 5, I discovered it has 'no service' (but will use wifi), it won't send IMs OR texts and Apple constantly keeps asking me for my Apple ID which i recently changed but still uses the old email, and won't accept any passwords.
    The 5 used to send IMs and texts but they would be sent to my friends through my email address, so I googled this and went to messages>send and recieve, and the only thing i can select is my email, not my number. I am using the 4 as well, purely so I can send texts and IMs through my name, not my email. The 4 also has signal and wifi, whereas the 5 only has wifi. I am wondering if the 5 has no signal and won't send IMs & texts because I am still using another phone? Surely they both cannot work together, so I was thinking I could reset my iPhone 4, and then see if the iPhone 5 will work, once the second phone isn't used anymore. If that doesn't work, I thought I could reset my 4, back-up my 5 and then restore again. I think that will work, but I have no idea.
    I have absolutely had it with trying to figure it out, I have used google but nothing seems to work. I am really hoping someone can tell me what to do with all my phone problems, because they are absolutely driving me mad!!!!!!!!!!!!!!!!!!! 
    I need to use the 5, it is costing me an extra £60 a month to use and I feel as though that money is being wasted as I can't text, IM or call people. Should i just get rid of the 4 and see what happens? I read online that to stop iMessages coming through as your email, you should turn it off and use regular texts. BUT I DO NOT WANT TO DO THIS. I send way too many texts, and it would cost a fortune. I also can't send photo messages on texts, because they cost a bomb to send through. I want to be able to use both texts and iMessages - using my name, not my email. 
    To add on to that huge essay I have written, on both phones Apple CONSTANTLY asks me for my Apple ID which I recently changed. I changed the email and the password, and it is coming up with the wrong email, and whatever password I put in, it still says it is wrong. It doesn't make sense, because yesterday I purchased some music from iTunes and when asked for my Apple ID, it used the right email and accepted the correct password. ...??? yet it still keeps getting it wrong, even though it worked in iTunes. ??!?
    Okay so I just reset my iPhone 4, and nothing seems to have changed...I thought if I reset it, it would be completely wiped, like a brand new iPhone 4, but it's not....THIS IS SO IRRITATING! Can someone please help me! I GREATLY appreciate any answers, hopefully someone on the internet can fix my problem! thank you for taking the time to read this essay, I am very thankful. PS. Both phones are up to date.

    You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

  • How can I make Firefox 4's "File Upload" window start in the same directory across all sites?

    I upload webcomic image files to multiple sites every day--the same file to multiple sites--through the "File Upload" window that comes up in Firefox when you click on a site's "Browse..." file request field.
    In Firefox 3 (under Windows XP), when I used Firefox's "File Upload" window to upload files, the "File Upload" window would come up showing the last directory from which I'd uploaded anything to ANY site.
    In Firefox 4, on the other hand, the "File Upload" window comes up showing the last directory from which I last uploaded to that specific domain.
    I'd like to know if there's an about:config setting--I couldn't find one when searching for "file," "upload," or "dir"--to revert to the Firefox 3 behavior. The reason is that now in Firefox 4, because I typically upload two files to four different web sites per day--one file to all four sites, then later in the day, a second file to all four sites--I have to switch from the first upload directory to the second upload directory in each of the four "File Upload" windows for the second file, whereas in Firefox 3 I only had to do that once. Here's how it used to go:
    In Firefox 3:
    # "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
    # "File Upload" for file 1 at drunkduck.com: desired local directory is already selected.
    # "File Upload" for file 1 at smackjeeves.com: desired local directory is already selected.
    # "File Upload" for file 1 at comicfury.com: desired local directory is already selected.
    # "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
    # "File Upload" for file 2 at drunkduck.com: desired local directory is already selected.
    # "File Upload" for file 2 at smackjeeves.com: desired local directory is already selected.
    # "File Upload" for file 2 at comicfury.com: desired local directory is already selected.
    and here's how it goes under Firefox 4:
    # "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
    # "File Upload" for file 1 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
    # "File Upload" for file 1 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
    # "File Upload" for file 1 at comicfury.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
    # "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
    # "File Upload" for file 2 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
    # "File Upload" for file 2 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
    # "File Upload" for file 2 at comicfury.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
    So basically, where under Firefox 3 I only had to browse through my directories twice per day to upload two files to four sites, under Firefox 4, I have to browse through my directories eight times per day to accomplish the same thing.

    You can use the Remember Password bookmarklet: <br />
    https://www.squarefree.com/bookmarklets/forms.html#remember_password <br /> ''Has worked for me when I have needed it to save a password on a web site that used autocomplete=off.'' As far as the Bug that '''cor-el''' linked, I can't remember ever running across a website that did it like that.
    Or, you can use the Saved Password Editor extension, which includes a means of manually adding Username/Passwords to Firefox. <br />
    https://addons.mozilla.org/en-US/firefox/addon/60265

Maybe you are looking for