Can I pull out a RAID drive and use in an external enclosure?

Hi everyone,
I have a Quicksilver with two identical drives formatted as a RAID setup (mirrored) and the G4 has reached its EOL (won't boot). Can I pull one of the RAID drives out and use in an external enclosure? Does the RAID formatting render it unusable in any other configuration? If that is the case, can I put the two drives into an external RAID enclosure?
Thanks in advance for any advice the community can supply!
Cheers,
James

Hi-
Can I pull one of the RAID drives out and use in an external enclosure?
Yes. Not as the original RAID setup, but as a drive, or part of a new RAID.
Does the RAID formatting render it unusable in any other configuration?
No. Just reformat the drive, and it's a regular drive, ready to go.
If that is the case, can I put the two drives into an external RAID enclosure?
A RAID set does not have to be internal. External RAID sets can be created, and successfully used.
Use firewire, or, if SATA, an eSATA connection to PCI controller.....
If the drive is, as you say, EOL, I would write zeros to the entire drive before reformatting.
Give Disk Utility a chance to map any bad sectors......

Similar Messages

  • If I install parallels can I pull my hard drive out of a PC and use it through an enclosure with USB connection?

    If I install parallels on my mac mini, can I pull my PC hard drive out, use a hard drive enclosure, and run my PC programs through the mini?

    Welcome to Apple Support Communities
    Moreover, you may be able to start your Mac directly from your PC hard drive and run Windows as you did with your PC. To do it, hold the Option (Alt) key while your computer is starting and choose the PC hard drive.
    If you want to do it in Parallels, you have to set it up in order to use the PC hard drive as the virtual hard disk

  • How can I come out of icloud drive and revert to icloud.co?

    How can I revert to previous configuration after mistakenly signing up to icloud drive? I have Mountain Lion and do not wish to sign up to Yosemite.

    You cannot revert to "Documents in the Cloud", you can just stop using iCloud Drive, once your iCloud account has been upgraded to iCloud Drive. There is no way back.
    From:   iCloud Drive FAQ - Apple Support
    After I upgrade to iCloud Drive, can I downgrade and go back to using Documents in the Cloud?
    No, after you upgrade to iCloud Drive, you can't go back to using Documents in the Cloud. You can turn off iCloud Drive in iOS 8 by going to Settings > iCloud > iCloud Drive. You can turn off iCloud Drive on your Mac by going to Apple menu > System Preferences > iCloud and deselecting iCloud Drive. If you turn off iCloud Drive, your documents and data will no longer be kept up to date across all of your devices.
    Also see:  iCloud: About using iWork for iOS and iCloud

  • Im swithching from 2007 macbook pro 17" to 2011 macbook pro 17" . Can i clone the old hard drive and use OSX 10.5.8?

    Can I install OSX 10.5.8 on a new macbook pro which comes with Lion? I would like to clone my old hard drive onto the new mac without lion causing compatibility issues????

    trajan2050 wrote:
    What if replace the new 2011 MBP drive with a brand new SSD with snow leopard pre installed?
    Snow Leopard may be possible, depending on whether it was shipped from the factory with SL and had Lion installed in the supply chain, or if it shipped with Lion in the first place. However the SL version would have to be the one which was originally installed or later, which likely means 10.6.7 or.8. The retail 10.6.3 installer won't work, nor will an installation cloned from a different Mac unless it was from the exact same model.
    Plenty of threads around concerning installing SL in place of Lion - do a search. Some have been successful.
    Replacing the HD wouldn't be necessary, and won't make the OS version run the rest of the hardware.

  • Can i recover photo files lost when i wiped out my hard-drive and  reinstalled mac os x?

    Can i recover photo files lost when i wiped out my hard-drive and  reinstalled mac os x?  I know that when a computer is wiped cleaned that the info is still on the hard drive, how do I access it?  Can I pay someone to access it?  Long story short, everything was saved to my external hard drive except my photos, by mistake of course.

    You have to stop using the drive immediately.  Completely stop.  Do not boot the computer from the drive.
    File recovery software: Try using an application such as Data Rescue 3 - http://www.prosofteng.com/products/data_rescue.php or FileSalvage - http://subrosasoft.com, or one of the ones listed in the (old) link below. Some have free trial versions that let you see if the software will help before you decide to buy. You will also need a second hard drive equal to or larger in size than your first drive as a destination drive for recovered files.
    http://data-recovery-software-review.toptenreviews.com/mac-recovery-software
    It is critical that you do not use the computer or even turn it on until you have rescued your files. Files only have the directory reference to them removed when you empty the trash or otherwise delete them from a computer (unless you use secure erase, in which case they are gone forever or can only be potentially be recovered by very expensive means) and are still present on the computer. However, their space is marked as available to any other file creation done on the computer (even done by you booting the computer) and there is risk that your files will be overwritten by the computer.
    Even if the above works, do not expect the results to be pretty or even 100% successful.  Files will often lose their names and you will have to re-name them one by one.

  • How can i pull out data from a spreadsheet only from the current month?

    Data is constantly being fed into a spreadsheet using a VI, this data comprises of such things as month, year, weights, std dev, etc.  I want to do some data manipulation on the current months data while the VI is running, how can I pull out only the data relating to the current month?  Each input into the spreadsheet stores the values for that run on one row, and there are perhaps 150 runs each month
    Any thoughts are greatefully received
    Thanks
    Ross
    Attachments:
    Results.xls ‏1 KB

    Hi Ross,
    I thought I would go away and make you an example VI for the results xls that you have sent me.
    Here it is:  I have added a few comments here and there but if you need more info please don't hessitate to post back on the forum
    Hope if helps
    AdamB
    National Instruments
    Applications Engineering Team Leader | National Instruments | UK & Ireland
    Attachments:
    MonthExtract.vi ‏43 KB

  • Can I back out 3.6.1 and install 3.6 instead? I want to use Azigo, but it is not compatible with 3.6.1.

    Can I back out 3.6.1 and install 3.6 instead? I want to use Azigo but it is not compatible with 3.6.1.

    Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Can I add a second hard drive and if so what cable etc would I need to do so?

    Can I add a second hard drive and if so what cable etc would I need to do so?
    This question was solved.
    View Solution.

    Hi,
    For many 17" (or 17.3") machines such as Envy 17, dv,  Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
        http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I put my recently purchased iTunes movies on to my thumb drive and WD My Passport external hard drive. My Mac keeps saying "can't be copy because it is too large for the volumes format

    How can I put my recently purchased iTunes movies onto my thumb drive and WD my passport external hard drive.My Mac is saying that can't be copied because it is too large for volumes format

    [file] is too large for the volumes format
    That is usually an indication that the Volume was never Erased or Partitioned for GUID partition table and Mac OS, and is still in a Windows format.
    Mac OS X Extended (journaled) has no such file-size limitations

  • Can I put my library on an external hard drive and use it between two computers?

    Can I put my library on an external hard drive and use it between two computers? I have two MBP; I will refer to one as computer A and to the other as computer B. I would like to be able to plug in my external hard drive, boot up iTunes, and if there were any changes made to the library previous to its last time accessed on this compluter, they show up on that computer, regardless of being imported on the other.
    A hypothetical example: I import three albums called 1, 2, and 3 on computer A over a week or so. I take the external hard drive and plug it into computer B. The entire library which was visible on A, is visible on B, including albums 1, 2, and 3.
    Is this possible? If so, what files need to be copied onto the external? I'm trying some different combinations, trial and error basically. Hopefully someone knows and can answer before I mess up my library. I also want to do this to free up space on my computer. All importing will be done from disc.

    iTunes/Preferences/Advanced : point your iTunes to the new location of the Library.
    Set "Share on local network" in the Sharing tab, and you or everyone on the local network can play your music.
    You make a backup first of the Library.
    Move the follwing to the new location:
    /Users/your username/Music/iTunes/iTunes Music
    have fun.

  • I have 2 iphones, one for personal and one for business.  I need my phones not to sync otherwise they will both ring all the time.  How can I log out of my icloud and unsync my phones?

    I have 2 iphones, one for personal and one for business.  I need my phones not to sync otherwise they will both ring all the time.  How can I log out of my icloud and unsync my phones?

    Syncing your phones to the same iCloud account won't cause them to both ring all the time, it only puts the same contacts, calendars, and other synced data on the phone.  The phones will only ring with someone calls the number associated with the phone.
    If you want to stop using iCloud on one or both of the phones, go to Settings>iCloud, tap Delete Account, then choose Keep On My iPhone when prompted.  This will disconnect them from iCloud and keep a copy of the synced data on the phone.

  • I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    I am using a verizon email address and microsoft office for mac outlook program to manage my emails.   Does any one know if  the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

    This is the Microsoft forum site that parallels what Apple has:
    Office for Mac forums
    It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

  • I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

  • I can't figure out why my reverb and echo things are greyed out

    I can't figure out why my reverb and echo things are greyed out on the bottom right of my screen with the edit tab open for the track. I was going to put a screenshot in here but I couldn't figure it out. I one can understand what I mean. Thank you.

    bennirubber wrote:
    reverb and echo things are greyed out on the bottom right of my screen
    http://www.bulletsandbones.com/GB/GBFAQ.html#effectsdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also.  I have not been able to figure out how to take clips from iMovie for that.

    For anyone who has used "Smilebox" for greeting cards:  I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also.  I have not been able to figure out how to take clips from iMovie for use with Smilebox.

    For anyone who has used "Smilebox" for greeting cards:  I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also.  I have not been able to figure out how to take clips from iMovie for use with Smilebox.

Maybe you are looking for

  • MIGO-Sales price for material (NL1S ROH1 ) could not be found

    Hi Experts When i doing MIGO , i am getting following Error Message .i.e., *Sales price for material (NL1S ROH1 ) could not be found*Message no. M7158 Diagnosis The sales price valuation is active in the valuation area. The system could not determine

  • SOAP adapter: port, logging/tracing, http/https

    Hi, several questions concerning SOAP adapter: SAP XI 3.0 SP19 used. <b>Scenario 1:</b> SOAP request adressing J2EE port http://host:8000/XISOAPAdapter/MessageServlet?channel=Partner:Service:SOAPSenderChannel <b>Scenario 2:</b> SOAP request adressing

  • Network activities deletion Problem

    Dear All, I have a requirement where in I have to delete multiple activities from a network using a Z transaction and then renumber the existing activity numbers. For deleting the activities, currently I have used BAPI_NETWORK_MAINTAIN with method u2

  • Weblogic no-stage mode deployment from remote machine

    Context: 1. Build server is on machine A, where ant script builds the file and package ear 2. WLST deployment.py script is on build server (machine A). 3. weblogic admin server in machine B. The managed servers are on machine B and C. 4. ear file is

  • Extrude text help please

    OS X / IIlustrator, I'm trying to recreate the extrude text in the attached , I'm having a bit of trouble in certin areas. These are the steps I have done so far select text - white fill / black stroke copy text / move down / transform / reflect firs