Can I purchase an iphone3g and then use it with the apple golf app as a golf gps without having to be on a cell plan or data plan?

If I purchase an iPhone 3g, can I then use it with the apple golf app without having cell or data service?

You do not need have cell service for the GPS to work.
If the iphone is new, then you would have to activate it with a carrier in order for it to work at all.
If it is used, then you can use it without wireless service:
Using an iPhone without a wireless service plan

Similar Messages

Using Automator with the Apple Mail app

I want to do something that I think should be easy! I have the text of an e-mail message that I want to send to a specific mailing list. The list is in an Address Book group. I want to personalize each e-mail so that it goes to just one person and is addressed to "Dr. <last name>" at "<e-mail address>," where both are in a separate Address Book entry.
I've tried a couple of scripts using the actions provided by Apple but they fall down because I can't get Automator to reference my e-mail message. I get the error, "There is no outgoing Mail message. (-2700)) occurred in Group Mailer."
Anyone know how to properly present Automator with my mail message?

That depends on the type of email account and the settings. You can leave mail on the server or remove it.

Can I format the CF in a cisco 1800 router and then use it on the ASA 5520?

Can I format Compact Flash in a cisco 1800 router and then use it on the ASA 5520?

You don't have to format the card in the router. You can do that on your PC. Just format the CF-card as FAT32 and plug it into the ASA.
BUT: If you just want to "upgrade" the old card with a different one, then first attach the original card from the ASA to your PC and copy all files (including the hidden ones) to your PC and then copy them back to the new card. That way you also move your licenses to the new card which are stored in hidden files and your private data like keys.

Is it possible to condition a load cell signal with a 1520 SCXI and then use it as the primary analog feedback for a 735X motion control board?

My system
PXI 1052 chassis
PXI 8196 RT controller
Flexmotion 7356 motion controller
Flexmotion 7354 motion controller
6259 M series DAQ
1520 SCXI
1520 SCXI
1314 SCXI frount mounting terminal block
DSM strain gage load cells
Exlar SR Brushless PM motors
Kollmorgen servo star CD series 5 drives
My objective:
I want to measure the force on the load cells with the 1520 SCXI (i.e. excite the load cell then amplify and condition its output) then I want to use this analog (force) signal as the primary feedback for my motion control system (7356 and 7354 motion controller connected to my drives and motors).
The problem:
The motion controller boards (7356 and 7354) can be configured for force feedback control via analog feedback from a load cell. However the boards implicitly expect the load cell signal to be amplified and conditioned with and external signal conditioner rather then using an NI SCXI module. Currently I’m am reading the SCXI signals via the 6259 M seriers DAQ and consequentially have no way to route the signal into the 735X boards for force feedback control. I can use softmotion to control the motors but then I loose the fast PID update rates possible with the 735X boards.
The question:
Is it possible to condition a load cell signal with a 1520 SCXI and then use it as the primary analog feedback for a 735X motion control board?
Thanks
Patrick Aubin
Ph.D Candidate
University of Washington &
VA MedicalCenter of Excellence for
Limb Loss Prevention and Prosthetic Engineering

Hi GG,
Thank you for your feedback.
>create your own external circuitry to amplify the signal.>
True a few op-amps could amplify and filter the signal externally but the performance of such an amateur built system will never match the accuracy and functionality of the 1520 SCXI. That’s why we spent the $2500 for the professional version.
>One thing that you could do is to use a UMI with your motion controller and then wire your signal from your SCXI to the UMI.>
As I understand it the UMI is basically a break out connectivity interface for third party drives. After conditioning and amplifying the analog force signal with the SCXI module the analog signal isn’t available to wire into a UMI. To my knowledge the conditioned signal of the SCXI resides only in the PXI backplane (i.e. there is no physical access to the conditioned analog signal). Can you explain how the UMI could be help here.
Again thanks for your input GG.
Patrick

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

This iphone was lost and erased. sign in with the apple id that was used to erase this iphone

this iphone was lost and erased. sign in with the apple id that was used to erase this iphone
pleas jelp me
[email protected]
i am in iran and i speak persion
thank you

If you are the original owner of the phone and have forgotten your Apple ID, start here:
https://iforgot.apple.com
If this is a phone you found, it is useless to you. There is no one who can put you in touch with the original owner and no way to bypass that message.

My ipod touch get restart by itself and just get stuck with the apple logo, What can i do?

my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?

Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
Otherwise, try connecting in DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock

Can I add my own art work to my albums in iTunes and/or share them with the Apple Store for downloading?

Can I add my own art work to my albums in iTunes and/or share them with the Apple Store for others to download?

Thanks Brij011
I thought that there was a way to do this. However, it would be neat to be able to upload correct Art Work for album covers so that other could share instead of having to scan / take picture and then import. I guess Apple would be inodated with incorrect pictures if we could upload to them.
Oh well... thanks again !

My sons ipod shows the apple sign and then occasionaaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on

my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it. we need help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My Ipod, keeps on saying very low battery then restarting. then turning bright with the apple logo and going back to very low battery again.

My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.

If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
And try here. Troubleshooting iPhone hardware
Powering Apple and third party peripherals through USB

Can you watch streaming movies and shows from netflix on the apple ipad?

can you watch streaming movies and shows from netflix on the apple ipad?

Yes, get the free Netflix App from the App store. Of course, you have to be a Netflix member.

HT201407 i forgot my apple id and password now my phone is not activate there message show this iphone was lost and erased sighn in with the apple id that was used to erase this iphone

i forgot my apple id and password now my phone is not activate there message show this iphone was lost and erased sighn in with the apple id that was used to erase this iphone

http://support.apple.com/kb/PH13695
Click this link.. its help you
http://www.youtube.com/watch?v=V48tYnkT4QI

HT201210 My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?

See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck!

What kind of HDMI switch is recommended? We have a Smsung TV and DVD player along with the Apple TV.

What kind of HDMI switch is recommended? We have a Saimsung TV and DVD player along with the Apple TV.. The switch we bought works for a few days and then starts cutting out. Thanks.

Does the TV not have multiple HDMI inputs?
There are no "recommended" switches.
Buy a quality device that gets good reviews.

Can I purchase an iphone3g and then use it with the apple golf app as a golf gps without having to be on a cell plan or data plan?

Similar Messages

Maybe you are looking for