Can I purchase Aperture to run on OSX 10.7.3?

I'm seeing several discussions that mention Aperture as a possible solution to many of my iPhoto problems but when looking at it in the "store" the system requirements are minimum OSX 10.9. Yet, I see reference to many using it with LION.
QUESTION: Can I use Aperture without upgrading from LION? If so, how/where do I buy a version that will run?

The currently sold version at the App Store requires Mavericks, correct. This version will support iCloud fully.
If you want a version, that is compatible with Lion, you could buy the boxed retail version of Aperture at Amazon.
This will install a very early Aperture 3 version.
Download an upgrade to Aperture 3.3.2 from the Support page: http://support.apple.com/kb/DL1561

Similar Messages

HT1338 can I purchase "aperture" , and will it run if I have snow leopard?

Is an older version of Aperture available so it will run on m MacBook Pro .. Snow Leopard?

Aperture 2, Technical Specifications

I have aperture 1. When I uploaded Snow Leopard I couldn't open Aperture.Do I have to purchase Aperture 3 or can I just purchase the latest download and have it work?

I have an I Mac and on it is Aperture one. i have all my photos on it. When I bought Snow Leopard, I could no longer use Aperture because it says i can't open it with Snow Leopard. Do I have to buy a brand new Aperture 3 or can i just download the most recent Aperture 3 download. In other words does the recent download allow me to start using it again, or do I have to go through buying all the downloads?

You can just purchase Aperture 3. If you do this from the App Store it will cost you $80 US but this is still cheaper then buying the individual upgrades.

MBP running Mac OSX Leopard 10.5.8 cannot get past login screen even in safe boot

Help! I have a Macbook Pro purchased in 2009, running Mac OSX Leopard 10.5.8 which froze while running Adobe Illustrator. On reboot, it won't allow me to go past the login screen. I tried starting up from the disc, running disk verification and repair and repairing disk permissions, and trying to start up in safe boot, all to no avail. When the login screen comes up it gives the name of my hard drive with a (2) after it, which seems strange. Any suggestions short of reinstalling the system software? I don't want to lose my applications/data!

AnointedOne wrote:
My 1 year old MBP running OSX has got more sluggish. The little multicolored spinning timer wheel keeps appearing a lot more now, and I hate it! My MBP takes drastically longer to boot when i turn it on as opposed to when I just got it. My web pages take a long time to load. Can anyone help me? WHat can I do to speed up my MBP. I am a novice mac user. Again my mac is getting slower by the day and i dont know how to increase its overall performance. Is there any simple software that can boost overall performance or will I have to reformat my MBP? I have a 200gb HD with 50 gb free and 4 gb of ram.
Welcome to Apple's discussion groups.
Launch the Activity Monitor utility. Pull down the list near the top and set it to "All Processes". Click on the "CPU" column heading to put the highest CPU consumers at the top. Also click on the "CPU" tab in the lower part of the window to check the value for "% Idle". If that value is much above zero, check the other categories for signs of resource problems. If nothing there points to a possible problem, launch the Console utility and look for messages that might suggest a problem. If you see messages that you have trouble interpreting, post them here and someone should be able to help.

Can i make Aperture run faster ?

To help those struggling to understand why their computer is running Aperture slowly, let me add a few thoughts to help out. I've been using the application since 1.0, bought a G5 quad to run it (launched on same day) with the stock video card. My Photographic interest was Landscape and macro work in film (hobby) and been using digital since 94 and now turned Pro adding Portrats and Weddings to my interest.
How do i run Aperture at a decent speed ?
1. Invest in good hardware. In any of Apple's product line max-out the graphics card option (except perhaps expensive Quadro fx4500), max out CPU option then the RAM. Invest as much as possible in the non-upgradeable components. Over time you can add more ram, but don't underestimate the importance of RAM in OSX. Keep your boot/application and data drives below 70% capacity as above this they start to slow down.
2. Use the vaults and backup the library (don't forget any referenced images).
3. When editing images, don't whang the sliders freely left to right. Be a crafstman, use the number adjustment arrows, with the modifier keys for fine tunng SHIFT and ALT. This is faster.
4. If an image has a lot of spot'n'patches, do this first before any other adjustments (or untick their box in the HUD). Similarly for strighten, do this before H&S or exposure mods.
5. Switch off previews, for marginal improvements.
6. Don't use full-screen mode, its lovely, but with my awful graphic card it kills it when adjusting. Remove the projects window W and control bar D. Toggle the adjustments with I. Real estate is arranged better with the browser on LHS.
7. Try culling the rejects with the viewer off V and maximise the thumbnail size. Suprisingly fast and effective when only going for rejects.
8. After culling use the auto stack feature to reduce the number of images your viewing into 'like' shots. Helps when choosing your story for output.
9. Setup some presets for varying degrees of edge sharpen and White balance as this helps get you get in the vacinity of where you want the adjustment. eg. I have five increasing degrees of edge sharpening intensity and six white balance settings (daylight, cloudy, shade, flash, tungsten, flourescent) which gets me closer to a good WB faster than playing with multiple sliders.
10. Learn the keyboard shortcut.
11. Use Aperture feedback. If your unsatisfied with anything then tell apple as well as the forums. So far we have seen big improvements in Aperture, some were really alpha/beta issues but it is clear Apple is serious about investing in this young Application. I hope they invest in the pixel-pushing, local editing, masks and layers abilities, but do it true to an intuitave workflow platform that Aperture has become.
12. RTFM as well as buy a book - invest in your skills, become better, faster and ultimately more productive.
13. Don't believe in bad luck !
The reason for Aperture running sluggish when using specific adjustments is because i need to upgrade my video card. Fortunately, i can, but might invest in a MP for more storage.

If You go to the Aperture site page for basic requirements needed to run it, It will state a Powerbook in fairly basic design will run the Application.
And before I purchased Aperture, and as you can see I updated my RAM to 2 GB.
I ordered this laptop with the top line of all hardware possible.
So I could run also run a 20" screen.
And no, I didn't pack the 20" in my suitcase.
It's amazing how far you have to make sure people don't take one word and run with it.
Not ONLY Aperture, but DDP (Digital Photo Professional), as I hate when people only use abbreviations for everything, and the person trying to learn something is slammed out the door for even looking.
But both applications run pig azz slow. So much so, and I also use the Activity Monitor to keep watch over things in realtime.
When things run this slow to the point you can't see a live change in the view,
You don't learn much, and you can't complete a simple project.
Like one person suggested earlier, just tweak the image one mark at a time.
Well hey, we don't have 6 hours to make one adjustment.
The processor is running at 100% and never backs off till you kill the application.
Making the move from Canon G5, to a Canon 30D and a few thou in lenses, is about the biggest joke while in Europe. Yea, drag all this stuff you don't see to Europe, with 2 portable hard drives to keep the Mac hard drive happy.
It all adds up to roughly a $7000 dollar mistake.
The ads are a total farce. Get this, and do stuff beyond the norm.
Yea Right, like your going to bring a G5 tower in a suitcase.
Oh sure, I'll struggle with the software till get through with 20 images, and
what if you have 300?
Now, one question... Who's next , as far as an application that runs RAW images with no lag. With out all the BS.
Power Book G4-1.67-2GB, Bluetooth Mouse & Keys Mac OS X (10.4.8) 20" screen for dual view.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

I just purchased Aperture and have 20,000 photos in my iPhoto Library. Can I import only certain events from iPhoto into Aperture or do I have to merge the whole iPhoto library?

I just purchased Aperture and have 20,000 + photos in my iPhoto Library. I see that I can create a unified library between the two. I am wondering if I can import only certain events from iPhoto (like only 2014 events) into Aperture or do I have to merge the whole iPhoto library? Are there any benefits to bringing the whole iPhoto library over to Aperture (iPhoto is SO SLOW for me, I wonder if it is because I have so many photos). Or, any detriment to only bring a few events over?
And, if I don't merge the two libraries, I assume that means I cannot do it at a later date?
Help. My local Apple store has had very few Aperture workshops, and the next one is like 2 months away.

Thank you so much for this information. Here are some responses/comments:
Disk space - it says 114.43 GB out of 499.25 GB free. I have no idea if that is enough.
iPhoto version is 9.5.1
Again, I am not sure how to know if I have 3rd party software...but I don't think I do. Is 3rd party software anything non-apple?
I will try rebuilding the library. if that doesn't help, maybe I need more memory...? That is what Apple suggested, but that, of course, means buying something else. I've already bought APERTURE, on their recommendation...
It wasn't, and they told me it was slow because I had too many photos for iPhoto to handle and that I should buy Aperture. Which I did.
What is your iPhoto version? Are you using the most recent version 9.5.1?
iPhoto can handle 20000 photos, no problem. Your computer can be slow for several reasons:
The most common problem for slowness - insufficient disk space. Don't let your free disk space drop below 20 GB of free space, better more. If the operating system does not have enough working space and the applications you are using, you will notice a very lagging behaviour.
Older or incompatible softweare can cripple your mac. Do you have any older third-party software installed, that might have installed incompatible kernel extensions?
Aperture might be slow or keep crashing, if you imported a corrupted image or incompatible video, that cannot be processed. Then Aperture will try over and over again to create previews and never succeed. You could test for this situation, by launching Aperture with the Shift-key held down. This will defer the generation of previews. If Aperture will launch and work better this way, you probably have some bad media in your photo library.
Another problem to check for is a corruption of your Aperture/iPhoto library. You have run the First Aid Tools to repair the iPhoto Library, but have you ever tried to rebuild the library? See this post by Old Toad: Rebuild iPhoto Version 11

Have a macbook alu running on osx 10.5.8... but need to upgrade software to run my iphone 5,, what do i need and where can i get it?

Hi
I have a Macbook alu running on osx 10.5.8
I cant get anymore software updates any more ..i guess because its too old?
However have just got an iphone 5 which it will not work with.
What software do i need to upgrade to and where can i get it
Thanks
Mark

PloppyPloppy wrote:
Hi
I have a Macbook alu running on osx 10.5.8
Hi Mark,
You need to Update to OS X 10.6.8 = Snow Leopard so you can Update iTunes to Sync your iPhone.
Upgrading to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

What software can I update with on my powerpc g5. Running Mac osx 10.4.11, What software can I update with on my powerpc g5? Running Mac osx 10.4.11

What software can I update with on my powerpc g5. Running Mac osx 10.4.11, What software can I update with on my powerpc g5. Running Mac osx 10.4.11. Since it doesn't have Intel dual core processor, can't do Snow Leopard right? Is there anyway to upgrade the software?

Snow is Intel only. You could get Leopard 10.5 by purchasing a Retail (black) Disk off eBay or calling Apple Service and ordering one from them. That would allow you to run Safai 5 and iTunes 10, I believe, but would lose Classic support in the process.

HT2674 I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted. File folder: "Core Services" contains a locked file: "boot.efi". It will not

I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive which operates from Time Machine.
Now, the trash can will not empty some of the files deleted from the backup harddrive.
The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi".
It will not delete.
How do I get the trash can empty of these files?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update softdate" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

Safari question here... Can I purchase a browser update for my mac book? I have OSX 10.6.8 and the "update software" function won't let me get past Safari 5.1.10. Please tell me I don't need a new computer just yet... Thx!!

You need to upgrade OS X.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Can I purchase Aperture to run on OSX 10.7.3?

Similar Messages

Maybe you are looking for