Can I purchase TTS voices that can be uploaded into Cap. 7 rather than imported as seperate files?

I purchased Neospeech in the past and had to create the files in their software and import them into Captivate. Can I purchase a voice that can be used in the same way as those that come free with the Captivate software?

To integrate the voices, see some tips from Kimberly CBT on this thread.
http://forums.adobe.com/message/5734631#5734631
On this thread, John Pierre mentioned that he could integrate Cereproc's voices easily with Captivate 6. See if you can get a trial version to check the voice quality and other aspects before you pay for the full version.
http://forums.adobe.com/message/5027815#5027815
Sreekanth

Similar Messages

Can i upload first Transaction data rather than master data what will hap

hai,
can i upload first Transaction data rather than master data what happends going in bw regarding performance issues like indexes
let me know
regards,
murali

Hi Murali,
you can load the transaction data before master data. The main impact will be, that the system has to generate sid's and has to populate the sid-table of the master data objects while loading the data to a data target (cube or ods that is activated for bex reporting). This basically means that your data loads will take some more time. Additionally, if you need the master data attributes somewhere in your update or transfer rules, you will not get the correct information.
So basically it is always a good approach to load and activate the master data before loading the transactional data. But anyway, specially in the development environment I usually don't load all the necessary master data.
regards
Siggi
PS: navigational attributes of the data targets will not be available until you loaded the master data and scheduled the attribute and hierarchy change run.
Message was edited by: Siegfried Szameitat

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

If it gets far enough to reject your serial number, it won't help to download it. It must have installed ok.
What is the message you get (DON'T tell us the serial number!!)?
Does it mention a "qualifying product" by any chance?

I can't change my imessage so that it goes through my mobile number rather than my email

I can't change my imessage so that it goes through my mobile number rather than my email
For some unknown reason, my phone has decided to change my imessage reciever to my email rather than my actual mobile number and won't let me change it back

Hi, i have had this same problem a few times, but i think i found a solution.
Go into your setting to iMessage, disable it from your email, via logging out of it using your Apple iD
So now ita only your phone number on iMessage.
At first it wont work, but try turning it off and on, just give it abit of time until it registers that your number is able yo use iMessage.
Once you notice its working, just go back and log back into using your Apple iD
Hope it Helps
Ryan.

If I purchase lightroom but want to install on both a pc and a mac is that possible from just a download version rather than ordering a disc?

If I purchase lightroom but want to install on both a pc and a mac is that possible from just a download version rather than ordering a disc?

Yes, a single serial number can be used to install on two computers and one can be a PC and one a Mac. The download will be a different installer for each platform but the serial number should activate both.

HT4623 i am trying to set up an iphone4s purchased on ebay that is supposedly locked into orange i have tried an orange sim but it tells me it is locked with another carrier but does not tell me who how do i find out

i am trying to set up an iphone 4s purchased on ebay that is supposedly locked into orange i have tried an orange sim to no avail telling me the phone is locked and i need the carriers sim can anyone tell me how i find out who this phone is locked to

Ask the seller or call Apple Care and give them the serial number. They may be able to tell you.

How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"

          I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
          5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          I try to make a t3 connection between the PC and the cluster of machines.
          On the Windows PC I have the following configuration for the
          "c:\windows\system32\drivers\etc\Hosts" :
          171.1.70.61     becluster
          171.1.70.62     becluster
          where
          "171.1.70.61 is dcsv01 and
          171.1.70.62 is dcsv02 "
          If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
          down the requests are routed to the other one.
          BUT!! If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          I have a not great failover mechanism :
          say that my windows hosts file looks like :
          171.1.70.61(dcsv01)     becluster
          171.1.70.62(dcsv02)     becluster
          then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
          BUT!! if dcsv01 is down then I got on my PC the
          "Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
          not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          So how can I use
          "t3://beclsuter:6001" rather than
          "t3://dcsv01, dcsv02:6001" with the same failover service????
          Thanks


          Thanks mike,
          In a UNIX or windows environment how can I get a DNS server that round robin?
          "Michael Reiche" <[email protected]> wrote:
          >You need to have becluster defined in a DNS that round-robins.
          >
          >Mike
          >
          >"Martial" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
          >server
          >> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          >>
          >> I try to make a t3 connection between the PC and the cluster of machines.
          >>
          >> On the Windows PC I have the following configuration for the
          >> "c:\windows\system32\drivers\etc\Hosts" :
          >> 171.1.70.61 becluster
          >> 171.1.70.62 becluster
          >> where
          >> "171.1.70.61 is dcsv01 and
          >> 171.1.70.62 is dcsv02 "
          >>
          >> If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          >> I have a great failover mechanism : if any of the machine (dcsv01 or
          >dcsv02) are
          >> down the requests are routed to the other one.
          >>
          >> BUT!! If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          >> I have a not great failover mechanism :
          >> say that my windows hosts file looks like :
          >> ..
          >> 171.1.70.61(dcsv01) becluster
          >> 171.1.70.62(dcsv02) becluster
          >> ..
          >> then if dcsv02 is down then all requests are routed to dcsv01 and that
          >is
          >fine.
          >> BUT!! if dcsv01 is down then I got on my PC the
          >> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
          >does
          >> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          >> So how can I use
          >> "t3://beclsuter:6001" rather than
          >> "t3://dcsv01, dcsv02:6001" with the same failover service????
          >>
          >> Thanks
          >>
          >>
          >>
          >
          >

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

HT201976 With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

HT201976 With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

Wish to purchase a printer that will reverse print for transfer app and also has 4 seperata ink well

There are severall units out there with 4 ink cartridges, not sure about the option to revesre image in the printer, however mirroring an image is possible in most software programs. Even in paint i think.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

When I load itunes it defaults to the store and then I get a Blue Screen. Does anyone know how to change itunes so that it will default to My Music rather than store. I need to be able to do this before I load itunes.

When I load itunes it defaults to the store and then I get a Blue Screen. Does anyone know how to change itunes so that it will default to My Music rather than store. I need to be able to do this before I load itunes.

I solved the problem with the assistance of apple support knowledgebase. Refer to TS3441.

I purchased an episode but it is only showing 30 seconds rather than the full 42 minutes. How do I get it to play the full episode as I can't seem to download it again?

I downloaded a tv epsiode, but it doesn't show the entire 42 minutes. All I get is a clip of 30 seconds, rather than the entire 42 minute episode. I have tried to download the episode again, but it wont allow me to and I have also tried to download the series, but if I do that it wont deliver the epsiode that I already have suposedly downloaded. Anyone have any idea how to help?
Thanks,

Hi JAM147,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

A private label album shows that it is uploaded into iTunes Match, yet I cannot download it to my iPhone. I can't figure out why?

5300+ of my 5600+ songs uploaded into iTunes match. One album of songs, private label, shows that it's loaded (there's a "cloud" beside all the songs), they are appropriate-bit-rate MP3s, and play just fine on my iMac. However, they're greyed-out when I try to download them to my iPhone 5. Any ideas?

Further investigation (and adding some display columns for iCloud status) revealed this album, among a few hundred other songs, were "Waiting". Observing it run, iTunes Match would attempt to upload song #1 (not on this album) then restart. Again and again.
Using Launcher to get to the Console, I found a iTunes Match "unexpected connection closure" error listed, about a couple hundred times since I started this process on Saturday. Not good. And then a bunch of Google results for various potential problems.
Examining my results, now with that iCloud status column, I found that basically my entire Old Time Radio library won't load, since it's bitrate is way too low (1930's radio mysteries didn't have a lot of fidelity, and don't need it now, particularly. So...that makes iTunes Match a non-starter for me, anyhow.
Off it goes. I'm back to sync'ing portions of my library again. Until I get an iPhone with more capacity.

Can i create DB in shared mem, rather than backed by a file

Hi
I'm using db 4.2.6 version and trying to create a DB in shared mem rather than a file. How do I achieve that.
While I look at documentation here:
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/env_region.html
==========
If the DB_SYSTEM_MEM flag is specified to DB->open(), shared regions are created in system memory rather than files. This is an alternative mechanism for sharing the Berkeley DB environment among multiple processes and multiple threads within processes.
===========
But DB->open() rejects DB_SYSTEM_MEM flat out. db->open() doesn't even talk about flag:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbopen.html
I could specify DB_SYSTEM_MEM for DBENV.
Here is my code. Also DBENV->open() won't let me specify DB_PRIVATE.
flags = DB_INIT_MPOOL | DB_CREATE | DB_SYSTEM_MEM | DB_INIT_TXN | DB_RECOVER | DB_INIT_LOG |
DB_LOG_AUTOREMOVE;
dbenv->open(dbenv, dbhome, flags, 0);
flags = DB_CREATE | DB_EXCL| DB_AUTO_COMMIT;
dbp->open(dbp, NULL, dbfile, NULL, DB_BTREE, flags, 0);If I create db as above, where is it getting created? I don't see it here:
# ./bdbperf -t -i 10000 -k 32 -v 128;ls -la dbtest
create log/transaction
creating in system mem
inserted 10000 records. errs 0
logs removed
inserting 10000 records took 0s.290ms (29 micros/op)
done. 0s.290ms
total 200
drwxr-xr-x 2 root root 80 Jul 17 03:04 .
drwxrwxrwx 7 root root 1180 Jul 17 03:04 ..
-rw-r----- 1 root root 8 Jul 17 03:04 __db.001
-rw-r----- 1 root root 190424 Jul 17 03:04 log.0000000011
However, if I specify a filename arg in dbp->open(), I do see a file with that name in my env dir 'dbtest'. db_stat on such file seems to be good.
# ./lt-db_stat -d dbfile -h dbtest
Sat Jul 17 02:38:01 2010 Local time
53162 Btree magic number
9 Btree version number
Little-endian Byte order
Flags
2 Minimum keys per-page
1024 Underlying database page size
239 Overflow key/data size
4 Number of levels in the tree
10000 Number of unique keys in the tree
10000 Number of data items in the tree
171 Number of tree internal pages
79122 Number of bytes free in tree internal pages (54% ff)
1822 Number of tree leaf pages
738356 Number of bytes free in tree leaf pages (60% ff)
0 Number of tree duplicate pages
0 Number of bytes free in tree duplicate pages (0% ff)
0 Number of tree overflow pages
0 Number of bytes free in tree overflow pages (0% ff)
0 Number of empty pages
0 Number of pages on the free list
So:
1. how do I create DB in shared-mem area and
2. how do I get stats for such DB?
Appeciate any help.

Hi,
user3143985 wrote:
I'm using db 4.2.6 version and trying to create a DB in shared mem rather than a file. How do I achieve that.There must be a typo, as there is no 4.2.6 release.
user3143985 wrote:
While I look at documentation here:
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/env_region.html
When reading the documentation, I would indicate to read the documentation from the release package you downloaded. The online documentation is accurate for the latest BDB release.
user3143985 wrote:
==========
If the DB_SYSTEM_MEM flag is specified to DB->open(), shared regions are created in system memory rather than files. This is an alternative mechanism for sharing the Berkeley DB environment among multiple processes and multiple threads within processes.
===========
But DB->open() rejects DB_SYSTEM_MEM flat out. db->open() doesn't even talk about flag:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/dbopen.html
That's a documentation error, it should refer to the DB_ENV->open()method. Thanks for pointing it out! As you can see, the DB_SYSTEM_MEM is linked to the DB_ENV->open() method: http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/envopen.html#envopen_DB_SYSTEM_MEM
user3143985 wrote:
1. how do I create DB in shared-mem area and This page should clarify this question and how a memory-only configuration looks like: http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/program_ram.html
user3143985 wrote:
2. how do I get stats for such DB?If you want to allocate region memory from the heap instead of from memory backed by the filesystem or system shared memory, you'll have to specify DB_PRIVATE ( http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/envopen.html#envopen_DB_PRIVATE ). DB_PRIVATE should not be specified if more than a single process is accessing the environment because it is likely to cause database corruption and unpredictable behavior. For example, if both a server application and Berkeley DB utilities (for example, db_archive, db_checkpoint or db_stat) are expected to access the environment, the DB_PRIVATE flag should not be specified.
Bogdan Coman

Can I purchase TTS voices that can be uploaded into Cap. 7 rather than imported as seperate files?

Similar Messages

Maybe you are looking for