Can I put a SSD in my Imac early 2008

I have an Imac early 2008 2.8 GHz intel Core 2 Duo and I would like to remove the 320 GB HD with a SSD and I would like to know if it is possible?

Yes. Tutorials on YouTube. Search: 2008 imac SSD.

Similar Messages

Adding ssd to an iMac early 2008

I have an iMac early 2008 with a hd by sata. I have also SuperDrive by pata/IDE. If I change the hd by a ssd by sata and a 1 tb hd by pata, I will increase the speed of my iMac? Another option is to install osx on a ext. FireWire 800 ssd with a box, which is the best option?

Adding the SSD for a boot/application volume will dramatically increase the speed of booting and application launching. Retrieving data from the pata hard drive will be slower than the existing SATA interface that your hard drive is on now. I don't know if that's enough of a speed hot to actually notice. The SSD will make the computer feel MUCH faster, I put one in my MacBook and it feels like a completely different machine, it's the single best upgrade I've ever done.
I don't know how much an SSD in an external FireWire enclosure will speed thins up but I'm considering the same thing as I don't want to open my iMac and risk messing something up.

Can i put tosh ssd 256gb for sata2 or 3. in my macbook5,1 aluminium intel core duo 2

can i put tosh ssd 256gb for sata2 or 3. in my macbook5,1 aluminium intel core duo 2

Ralph,
Apple iMac "Core 2 Duo" 2.66 20-Inch (Early 2009) Specs. This is an iMac 9,1. I downloaded the pdf manual and found that it will take 2 4GB memory cards (whew! I had already ordered them). Thanks for your help. I finally found everything I needed for now!
cpauley1

What kinds of cpu can you put in a 2007 modal imac to bring it to its maxwhat

What kinds of cpu can you put in a 2007 modal imac to bring it to its max
Thanks

While it CAN be done I don't know if you'll see enough bang for your buck to make it worthwhile. IMO you'll get a better return by installing an SSD and maxing out the ram. That said I don't have any idea which cpu you could swap for.

Does anyone know if running Photoshop thru a external SSD (using firewire) as a scratch disk, on a imac early 2008- make photoshop any faster doing tasks?

Has anyone tried this and if so, was there a noticable difference in photoshop doing its various tasks? Again, its a imac early 2008, and I looking to use a firewire to attach a Solid State Drive to use as the scratch disk. I am maxed out a 6gb ram.
Thanks

CanadianBear
KiltedTim's right of course. You seem to have adequate RAM.
I would ask you if this sluggishness is NEW? If so, what has changed that you can identify? Updates or upgrades? New software etc?
What kind of tasks? Any operation on a big image is processor heavy, but you have the RAM so scratch disk is the right direction. What is your 'History' preference in PShop? Keep that as small as you can afford to. Save often. Keep as few images open as possible - each image has its own History. Save often.
For scratch info on an image, choose that from the 'triangle' pop menu at the bottom of the document window. That seems a good way to tell if scratch disks are even at fault.
Happy Shopping
CCC

IMac early 2008 with OS X Lion 10.7.5 running slowly. How can I speed it up?

iMac early 2008 with OS X Lion 10.7.5 running slowly. How can I speed it up?

Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

I have iMac early 2008 2.8 Ghz with ox10.9.1 safari keeps shouding down can I deleted it and installed a new safari?

have iMac early 2008 2.8 Ghz with ox10.9.1 safari keeps shouding down can I deleted it and installed a new safari?

The Safari version you need is 7.0.1. What version shows in About Safari?

IMac Early 2008 - Spinning Wheel constantly also in Safe Mode

Hello Apple Support community!
Recently I've been having much trouble with my iMac Early 2008. In the last 5 years I have never had an issue with it until about 4 days ago and I have no idea how this problem came about.
I have 10.8.5 installed and know a bit about OS X.
Problem Description: On a recent Dropbox sync where there appeared to be a folder conflict the computer hung and was unresponsive. I had to hard shut down by using the power button. Every successive boot (and attempt for DB to sync) ended in a hang and the spinning wheel. I booted into Safemode, disabled Dropbox as a startup item, rebooted and everything worked for a few hours. Because I needed files from DB i decided to download the update and install. This added DB to the startup items again and history repeated itself. Spinning wheel on startup and a hard shut down again. This time safe mode couldn't save me. I was also getting the spinning wheel there too. I left it for a few days until today when I finally hads the time to troubleshoot.
From my iPad I unlinked the iMac from dropbox and booted it from the install disk to perform a hardward test. The standard test showed no errors so I rebooted. I immediately wanted to do a time machine backup and after 6GB were transferred, Time Machine stalled. The spinning wheel was back and I had to hard reset. So I started in safe mode and waited for Time Machine to do its thing. It began cleaning up and then managed only about 140MB before hanging.
Next I started the iMac in Firewire target disk mode and tried to transfer the files to my 15" Powerbook (OS 10.4.11) After only 700MB the Firewire logo on the iMac screen stopped moving and the file transfer stalled. I did a hard shut down again.
This time I ran OS 10.5.4 from the install disk and opened disk utility > verify disk to check for errors. None were found so I rebooted into SAFE MODE and wanted to run terminal to clear dyld cache. Since Finder is unusually sluggish and it seems any mouse-clicking causes the spinning wheel, I waited a bit and then hit command-space to bring up Spotlight into order to launch Terminal. There the iMac hung yet again, but quite strange is that the spotlight search window came up with the description about indexing taking a long time etc etc. I only know that the first time an HD has to be indexed and since this computer is quite old I find that curious.
A.t.m. I am running the extended hardware test from install disk and looking for suggestions about how I can reliably get my data off the HD in order to do a clean install, if I have to. Alternative suggestions to avoid that would be welcome, but I understand that this may be the only solution, if not also having to buy and install a new HD first.
thanks for your help in advance.
best regards,
Dan

AHT extended version reports the following error
4HDD/11/40000000:SATA(0,0)
Google results show only people with SSD drives reporting that. Cause could be a loose cable??
two weeks ago I moved and had to pack the iMac in the original box. However I transported this myself and not the movers.

HELP! iMac (early 2008) keeps freezing or restarts.

Problem description:
iMac, early 2008, 20 inch screen keeps freezing or restarts.
EtreCheck version: 2.1.4 (107)
Report generated December 17, 2014 at 11:27:04 AM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:7:33
Disk Information: ℹ️
WDC WD20EZRX-00D8PB0 disk0 : (2 TB)
EFI (disk0s1) <not mounted> : 210 MB
HD (disk0s2) / : 999.51 GB (664.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD 2 (disk0s4) /Volumes/HD 2 : 999.89 GB (288.69 GB free)
USB Information: ℹ️
Apple Inc. Built-in iSight
HP Photosmart C4500 series
Mitsumi Electric Hub in Apple Extended USB Keyboard
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Support]
/System/Library/Extensions
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [Support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Support]
Startup Items: ℹ️
HDDFanControlDaemon: Path: /Library/StartupItems/HDDFanControlDaemon
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[invalid?] .plist (hidden) [Support]
/usr/local/libexec/TorchUpdater /usr/local/libexec/TorchUpdater --hello=torch
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.flipvideo.FlipShareServer.launchd.plist [Support]
[running] com.iobit.AMCDaemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] com.rogueamoeba.instanton-agent.plist [Support]
[running] net.exirion.ssdfanctrl.plist [Support]
[loaded] net.sourceforge.MonolingualHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.iobit.AMCUpdate.plist [Support]
[not loaded] com.user.UninstallAD.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
smcFanControl ApplicationHidden (/Applications/smcFanControl.app)
Dropbox Application (/Applications/Dropbox.app)
Rogue Amoeba Schedule Helper Application (/Library/Application Support/Audio Hijack Pro/Rogue Amoeba Schedule Helper.app)
Google Chrome Application (/Applications/Google Chrome.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
HPEventHandler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
iPhotoPhotocast: Version: 7.0
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 7.1 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
Slick Savings [Cached] Adware! [Remove]
Ultimate Status Bar [Installed]
Facebook Photo Zoom [Cached]
Facebook Cleaner [Installed]
WOT [Installed]
DuckDuckGo [Installed]
Facebook Improved [Installed]
Turn Off the Lights [Installed]
Ebay Shopping Assistant [Cached] Adware! [Remove]
AdBlock [Installed]
Awesome Screenshot [Cached]
Amazon Shopping Assistant [Cached] Adware! [Remove]
Searchme [Cached] Adware! [Remove]
clea.nr Videos [Installed]
3rd Party Preference Panes: ℹ️
Déjà Vu [Support]
Flash Player [Support]
HDD Fan Control [Support]
Java [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
HD: Disk size: 999.51 GB Disk used: 335.16 GB
Destinations:
HD 2 [Local]
Total size: 999.89 GB
Total number of backups: 90
Oldest backup: 2013-11-17 14:04:36 +0000
Last backup: 2014-12-17 13:52:28 +0000
Size of backup disk: Too small
Backup size 999.89 GB < (Disk used 335.16 GB X 3)
Top Processes by CPU: ℹ️
      3% WindowServer
      2% mds
      1% ocspd
      0% fontd
      0% SystemUIServer
Top Processes by Memory: ℹ️
195 MB Safari
161 MB com.apple.WebKit.WebContent
56 MB mds_stores
54 MB Finder
49 MB Dropbox
Virtual Memory Information: ℹ️
59 MB Free RAM
835 MB Active RAM
792 MB Inactive RAM
349 MB Wired RAM
1.90 GB Page-ins
122 MB Page-outs
Diagnostics Information: ℹ️
Dec 17, 2014, 11:20:08 AM Self test - passed
Dec 17, 2014, 10:54:58 AM Kernel_2014-12-17-105458_[redacted].panic [Details]
Dec 17, 2014, 10:52:41 AM networkd_2014-12-17-105241_[redacted].crash
Dec 17, 2014, 10:52:32 AM networkd_2014-12-17-105232_[redacted].crash
Dec 17, 2014, 10:52:22 AM networkd_2014-12-17-105222_[redacted].crash
Dec 17, 2014, 10:52:11 AM networkd_2014-12-17-105211_[redacted].crash
Dec 17, 2014, 10:52:00 AM networkd_2014-12-17-105200_[redacted].crash
Dec 17, 2014, 10:51:50 AM networkd_2014-12-17-105150_[redacted].crash
Dec 17, 2014, 10:51:39 AM networkd_2014-12-17-105139_[redacted].crash
Dec 17, 2014, 10:51:28 AM networkd_2014-12-17-105128_[redacted].crash
Dec 17, 2014, 10:51:17 AM networkd_2014-12-17-105117_[redacted].crash
Dec 17, 2014, 10:51:07 AM networkd_2014-12-17-105107_[redacted].crash
Dec 17, 2014, 10:50:56 AM networkd_2014-12-17-105056_[redacted].crash
Dec 17, 2014, 10:50:45 AM networkd_2014-12-17-105045_[redacted].crash
Dec 17, 2014, 10:50:35 AM networkd_2014-12-17-105035_[redacted].crash
Dec 17, 2014, 10:50:24 AM networkd_2014-12-17-105024_[redacted].crash
Dec 17, 2014, 10:50:13 AM networkd_2014-12-17-105013_[redacted].crash
Dec 17, 2014, 10:50:03 AM networkd_2014-12-17-105003_[redacted].crash
Dec 17, 2014, 10:49:52 AM networkd_2014-12-17-104952_[redacted].crash
Dec 17, 2014, 10:49:41 AM networkd_2014-12-17-104941_[redacted].crash
Dec 17, 2014, 10:49:30 AM networkd_2014-12-17-104930_[redacted].crash
Dec 17, 2014, 10:49:20 AM networkd_2014-12-17-104920_[redacted].crash
Dec 17, 2014, 10:34:06 AM com.apple.WebKit.WebContent_2014-12-17-103406_[redacted].crash
Dec 17, 2014, 10:14:09 AM Dropbox_2014-12-17-101409_Tom-Mozers-iMac.cpu_[redacted].diag [Details]
Dec 17, 2014, 10:10:21 AM fmfd_2014-12-17-101021_[redacted].crash
Dec 17, 2014, 09:39:35 AM spindump_2014-12-17-093935_[redacted].crash
Dec 17, 2014, 09:35:03 AM WindowServer_2014-12-17-093503_[redacted].crash
Dec 17, 2014, 09:34:52 AM WindowServer_2014-12-17-093452_[redacted].crash
Dec 17, 2014, 09:34:41 AM WindowServer_2014-12-17-093441_[redacted].crash
Dec 17, 2014, 09:34:30 AM WindowServer_2014-12-17-093430_[redacted].crash
Dec 17, 2014, 09:34:20 AM WindowServer_2014-12-17-093420_[redacted].crash
Dec 17, 2014, 09:34:09 AM WindowServer_2014-12-17-093409_[redacted].crash
Dec 17, 2014, 09:33:58 AM WindowServer_2014-12-17-093358_[redacted].crash
Dec 17, 2014, 09:33:49 AM WindowServer_2014-12-17-093349_[redacted].crash
Dec 17, 2014, 09:33:37 AM WindowServer_2014-12-17-093337_[redacted].crash
Dec 17, 2014, 09:33:27 AM WindowServer_2014-12-17-093327_[redacted].crash
Dec 17, 2014, 09:33:16 AM WindowServer_2014-12-17-093316_[redacted].crash
Dec 17, 2014, 09:33:05 AM WindowServer_2014-12-17-093305_[redacted].crash
Dec 17, 2014, 09:32:54 AM WindowServer_2014-12-17-093254_[redacted].crash
Dec 17, 2014, 09:32:44 AM WindowServer_2014-12-17-093244_[redacted].crash
Dec 17, 2014, 09:32:33 AM WindowServer_2014-12-17-093233_[redacted].crash
Dec 17, 2014, 09:32:22 AM WindowServer_2014-12-17-093222_[redacted].crash
Dec 17, 2014, 09:32:11 AM WindowServer_2014-12-17-093211_[redacted].crash
Dec 17, 2014, 09:32:01 AM WindowServer_2014-12-17-093201_[redacted].crash
Dec 17, 2014, 09:31:59 AM garcon_2014-12-17-093159_[redacted].crash
Dec 17, 2014, 09:31:56 AM WindowServer_2014-12-17-093156_[redacted].crash
Dec 17, 2014, 09:31:55 AM launchservicesd_2014-12-17-093155_[redacted].crash
Dec 17, 2014, 09:31:51 AM WindowServer_2014-12-17-093151_[redacted].crash
Dec 17, 2014, 09:25:36 AM Safari_2014-12-17-092536_[redacted].crash
Dec 17, 2014, 09:08:21 AM Dropbox_2014-12-17-090821_Tom-Mozers-iMac.cpu_[redacted].diag [Details]
Dec 16, 2014, 09:22:41 PM Safari_2014-12-16-212241_[redacted].crash
Dec 16, 2014, 09:22:41 PM com.apple.WebKit.WebContent_2014-12-16-212241_[redacted].crash
Dec 16, 2014, 08:53:05 PM Dropbox_2014-12-16-205305_Tom-Mozers-iMac.cpu_[redacted].diag [Details]
Dec 16, 2014, 08:50:24 PM callservicesd_2014-12-16-205024_[redacted].crash
Dec 16, 2014, 08:03:26 PM com.apple.WebKit.WebContent_2014-12-16-200326_[redacted].crash
Dec 16, 2014, 07:30:27 PM Kernel_2014-12-16-193027_[redacted].panic [Details]
Dec 16, 2014, 08:21:59 AM Dropbox_2014-12-16-082159_Tom-Mozers-iMac.cpu_[redacted].diag [Details]
Dec 15, 2014, 12:50:11 AM com.apple.WebKit.WebContent_2014-12-15-005011_Tom-Mozers-iMac.cpu_[redacted].di ag [Details]

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have an older iMac (early 2008) that eats all my bandwidth when i turn it on. I don't know what's running. is there a fix?

I have an iMac (early 2008) 2.4ghz, Intel Core 2 Duo, 4GB ram, 250GB hdd, OS X 10.9.4. About 8 months ago, we got a call from our Internet provider (Cox) telling us we were were eating up about 250GB of bandwidth a month, and they were going to start charging us extra for it. I monitored it for a few days and found that as soon as i turned on the Mac, it started eating up bandwidth. Took it to the Genius bar, but they were clueless.
I just bought a refurb iMac (late 2009) 2.66ghz, Intel Core i5, 8 GB ram, 1TB hdd, OS X 10.9.4. Should I transfer all my files over to this new one from the old iMac, or should I try to get the problem fixed before the transfer. Also, I'm hoping to salvage the old iMac, and let my wife use it once I've got it fixed.

Most often BitTorrent, iCloud, Dropbox, or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least Photo Stream and Documents & Data in its preference pane and see whether there's any change. If you use third-party network backup or file-sync software, disable that. If you use a torrent client, remove it.
Otherwise, if you're running OS X 10.9 or later, you can see which processes are most active on the network.
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select All Processes from the View menu, if not already selected, and also select the Network tab.
Click the heading of the Sent Bytes column in the process table to sort the entries by bandwidth usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Repeat with the Rcvd Bytes column.

Have an iMac Early 2008 + Windows 7 and no sound from speaker out? SOLVED!!

Hello everyone,
So I'm pleased to say after over a month of trying to solve this annoying problem, it's been solved! Basically, if you have an iMac, Early 2008 edition (8,1) and Windows 7 and notice that the default microsoft driver gives very low sound and the new realtek drivers only give sound through the internal speakers... then this solution is for you!
What you'll need:
7-zip (www.7-zip.com)
Mac OS X 10.5 Leopard Disc 1 (NOT Snow Leopard!)
Here's what you'll need to do, step by step:
1) Uninstall the Realtek Driver (latest version currently 2.37) by going to Control Panel / Programs / Uninstall Programs.
2) Reboot. Upon reboot, the system will automatically reinstall the default Microsoft drivers. You can check this in Device Manager (control panel / system / device manager).
3) Insert the original Leopard Disc 1 that came with your iMac (very important, as this is the only driver I know for sure will work). Point windows explorer to the folder: D:\Boot Camp\Drivers (assuming d: is your cd-rom drive).
4) Copy the "RealTekSetup.exe" file somewhere on your desktop. Do NOT install it!
5) Decompress "RealTekSetup.exe" by right clicking the file and choosing "7-zip decompress". Again, you'll need to make sure you installed 7-zip from 7zip.com prior to doing this.
6) Go to your Device Manager again, right click the sound device (which should be something like High Definition Audio) and choose "Update Device Software".
7) Select "Browse my computer for driver software" and direct it to the folder that you extracted the drivers to.
8) You now have sound through your EXTERNAL SPEAKERS!
This works because there is a bug that RealTek/Apple does not seem to want to fix where the newer version of the RealTek control panel detects the speaker out as line in and the line in as nothing! This forces drivers normally made for Vista or Vista64 to install on Windows 7, which work 100% great.
I promise you, if you have an Early 2008 iMac, this WILL fix your problem if you follow each step! Let me know if you have any questions!
Brad Levicoff

If you don't have any Leopard disk then just google for "Vista_R199.exe".
This driver works nice on Early 2008 IMAC. I also tried an earlier version, Vista_R182.exe but there sometimes was a horrible background noise which made listening to music impossible.
Just download and follow the instructions above in the first post.
Have fun.
Uska
Message was edited by: Uska

HT3235 Imac early 2008

Would be possible to use the IMAC early 2008 as a desktop-monitor for a new MacBook air? If YES how?

Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Problem reinstalling Mac 10.6.8 on iMac early 2008, 2 meg memory.

Have iMac early 2008 2meg memory. Upgraded from 10.5.8 to 10.6 then to 10.6.8 but computer ran slow and froze so tried to reinstall OS 10.6 with disc. Used disc utility to check hard drive and it was ok. Tried twice to install 10.6 from install disc, but both times failed due to errors. Existing system 10.6.8 is corrupt so need to reinstall 10.6 then upgrade to 10.6.8 . I don't want to erase disc as have some apps e.g. CS5, which I don't want to erase. I also would prefer not having to back up disc apps and then reformat disc.   Any suggestions? Guess I could make boot drive, erase hard drive OS 10.6.8, and then install new copy. Had major issues with 10.6.8 running slow and freezing. Could that be 2 meg memory? Have more memory coming in mail and will upgrade to 4 meg. Can you run more than the apple recommended 4 meg on this machine? Thanks for help. Sorry for the lengthly post.....

To do what you want requires erasing the disk first. There is no way around this.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

IMac early 2008 screen not working properly, lots of lines on screen, re appearing and disappearing at random(normally slowly), computer fine on external screen, any suggestions?

This seemed to happen very suddenly; I left my iMac running while i went out and came in to find that the screen was totally unusable, as you will be able to see from the picture it has a lot of lines that seem to come and go a random and sometimes it goes black all together. What do you think is wrong with it? Logic board? Graphics card? Screen itself?.. also if it is the graphics card, is it separate to the logic board or do both need to be replaced?
Also some additional info:
iMac Early 2008
2.4ghz
4gb Ram
OSX 10.9.2
ATI Radion HD 2400
Actual computer working on external monitor, just not internal
Thanks

Costs vary by area, I think you may find out though that spending money on a 6+ year computer may not be worth it, you can buy an Apple Refurbished Mac with much more up-to-date specifications and save hundreds of $s. If this is of interest you can only find them on Apple's on-line store, in the US the current link is:
http://store.apple.com/us/browse/home/specialdeals
Then click the link to the iMacs. If you don't find one you want, continue looking the inventories change frequently, sometimes by the hour.

Display freezes using Safari 5.1 after Mac OS 10.74 install - iMac (early 2008)

After installing Mac OS X 10.7.4 on a 24-inch iMac (Early 2008), experiencing display anomalies and freezes, while using Safari and web-based e-mail.
Screen will go all white, system will lock up, requiring power-off restart. Latest incident while using Safari -- display went green with vertical blue stripes, system hang, requiring power-off restart.
System details: Intel iMac, 24" (Early 2008), 2.8 GHz Intel Core 2 Duo CPU, 2 GB RAM, Mac OS X 10.7.4.
Any suggestions on how to resolve these video distortion / system hang problems would be greatly appreciated.

As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
You are now in a perfect position to do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
Here is a link to a Widget to monitor your temps and other operations:
http://islayer.com/apps/istatpro/

Can I put a SSD in my Imac early 2008

Similar Messages

Maybe you are looking for