Can I put abort execution button and Run button in GUI ?
Dear All ,
Can I put "abort execution button" and "Run button" in GUI with bigger buttons ?
Thanks.....
Hi wMw.
Aborting normally works fine for very small applications or architectures but not for anything after that. Aborting a VI can leave things in states that you don't want to be in or references open. Sometimes you do need to Abort the code though (other programming environments use Abort buttons) so I don't think we can get rid of it entirely.But try to avoid it maximum.
EDIT:why you are trying to do such a strange thing??
Thanks as kudos only
Similar Messages
-
I've just recently updated to the ver 4.0. After the update, I can't select my vertical scroll and any buttons on the search toolbar. I've tried switching off all the add-ons and running it on safe-mode but the problem still persist. Anybody encountered the same issue here? Any help would be good. Cheers
Okay. The missing menus at the top of iTunes (in recent versions) can indicate trouble with the Segoe UI fonts on your system. It's a new symptom of a problem that can also cause text to go missing from the Device tab in iTunes.
Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
iTunes 10.1 Missing Text -
MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?
Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
You can read about restoring the software here.
iTunes: Restoring iOS software - Support - Apple
Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
You should read this first before you restore from either backup.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
This is a must read before you erase the iPad should you decide to go that route.
iOS: Understanding 'Erase All Content and Settings' - Support - Apple -
My phone is dead it will not turn back on after taking a step I have used in the past when I have had issues with the phone. In the past I haeld the top button and the button on the face down and it will turn black then the apple sign comes up then off. I can then turn it back on and it seems to be reset and all is good not so today. It will not turn back on.
1. Plug phone into AC adaptor and charge for at least 30 minutes
2. If not on, reset phone: press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
If no reponse to above, there is hardware damage and you need to take it to Apple or whoever provides iPhone service in your country. -
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
Hey my lock screen button and home button jammed it doesnt work.How can I fix this problem.But first of all I live in Turkey.But my Iphone 4 is bought from apple store victoria gardens CA.Do I have warranty in Turkey ?
The warranty is only good in the country of purchase.
-
Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?
Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?
Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
Mylenium -
To save hard drive space, can I put my iMovie projects and clips on an external drive?
to save hard drive space, can I put my iMovie projects and clips on an external drive?
Yes.
To preserve your projects, all moves should be done from within iMovie, (not the Finder).
First, the external drive must be formatted as Mac OS Extended (journaled). FAT32 will not work. You can reformat using Disk Utility if you need to.
When importing video from your camera, you can specify your external drive as the target on the import screen.
For existing projects, you should move using these instructions.
http://help.apple.com/imovie/#move7d66613
There is an error in the instructions where it says to drag the project icon to the icon in the Event Library. You should instead look for your hard drive icon in the Project Library.
You can move events using these instructions.
http://help.apple.com/imovie/#mov3ac6d42c
If you want to move Events, and copy photos, copy music, etc for editing on another Mac, you should use the FILE/CONSOLIDATE MEDIA feature after moving the Project as above.
http://help.apple.com/imovie/#mov3ac6c7c9 -
Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?
Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias -
My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?
Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one. -
Where can I find the Java SE 6 runtime download so I can get Adobe Photoshop CS5 up and running again. I have to go this route. Currently on my Mac, I need to be running Java 7.65 for work-related stuff. I went to the Java site, but could not find anything that simply says "Java SE 6 runtime" ... Or, is there another way to get CS5 up and running with my recent Yosemite download?
No, I can't go that route. I have to stick with my current Java 7.65 ... Our IT department said just to download SE6 Runtime separately ... If I was understanding that correctly. Or, can you have two different versions of Java running ... 6 ... and 7.65?
-
On the new version of iTunes the shuffle button and replay buttons appear to have disappeared on the genius tab and am always having to listen to shuffled songs now :( how can I stop this?
It appears from many other posts that the " Keep This iPod in the Source List" function isn't included in iTunes 7 unfortunately. You can leave your feedback on it's absence at this link: Apple Product Feedback
You can check out a workaround at this link which may help out for now: Create ready-to-sync playlists for Shuffles in iTunes 7 -
I have an iPod 5. The screen is black, I tried charging it. It makes a bing when I plug it in so power is going to it. When I hold the sleep button and home button to use the camera it takes a pic although the screen stays black the sound is there. I hope someone can help me !!!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iphone screen has turned black, phone is still on as screen shots can be taken. When home button and power button are held - no apple icon will appear. Please help??
If this iPhone has had the screen replaced previously, possibly LCD Display connector has simply come loose from the Logic Board. Possibly the LCD Display is faulty and the front screen assembly needs to be replaced. If you have Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. This is handled by Apple with Replacement iPhone 4S.
-
Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Connection Pooling: Do I have to do anything special to use it?
All, I've a question about connection pooling. This is my scenario: * Web user makes a request. * Request comes to a module (M1). * M1 calls my module (M2). * M1 and M2 are both java libraries. This is what M1 does: * It does a JNDI lookup and gets a
-
Function module / way to know Activated customer exits in the system
Dear all, How to know Function module / way to know Activated customer exits in the system. Regards, Purshoth
-
What would cause the response time of Firefox to be very long?
I have been using Firefox for years with few problems. Now Firefox takes seconds to respond to any request. If I use a mouse click before Firefox is read, "not responding" appears on the top line and the little blue revolving circle appears. Firefox
-
How can i install adobe flash player
How to install ms live meeting with my mac?
-
What happened to mini bridge. CC2014. Please bring it back!!
All of a sudden, I realized that mini-bridge was gone. I can't stand the regular Bridge. Please bring it back. I may have to go back to CS6 because I can't work in Photoshop without mini-bridge. What is the status of bringing it back???