Can I put check box prompt on the left side of box?

Thanks.

Yes but you have to delete the label and use the prompt property instead. Once you have specified a prompt set the Attachment Edge to Start.

Similar Messages

  • Can't put back a screw on the port side

    I tried putting my MacBook back together and I accidentally put a wrong screw in one of the port side holes. I managed to get it out, now I can't put the right one in. How can I fix this?

    David in AZ wrote:
    When you say the wrong screw do you mean a screw that was of larger size? If so, you may have stretched out the hole and can't reapply the correct screw...
    I think that's the case.

  • I have a smaller box flash on the left side just before firefox main page opens

    just as firefox starts a smaller box flashes on and is replaced insantly by the start page of firefox
    == This happened ==
    Every time Firefox opened
    == a couple of months ago

    The bottom left corner holds the keys:
    • The center Icon is meant to look like the mini-calendar you seek, and clicking on it can enable the Mini-calendars.
    • How many depends on how much room is provided by dragging the "bar with a bubble" above my example mini-calendar upward to make room for one or more.
    •Which ones depends on the forward and back arrows to the left and right of the month-name in my example above.

  • TS1314 i can not find a photo folder on the left side on itunes

    I can not find the photo folder on itunes

    It doesn't appear on the left-hand side. If you want to sync photos to your device then you need to connect it to your computer, select the iPad/iPhone/iPod Touch on the left-hand side under 'Devices', and one of the tabs on the right-hand side should be Photos i.e. it's similar to the other tabs that you use for selecting what to sync to the device : syncing photos. You will need to sync all the photos that you want on the device together in one go as only the most recent photo sync remains on the it- not including photos in a subsequent sync is how you delete them from the it.

  • How to put vertical Scroll Bar on the LEFT side of a VBox?

    The default is on the RIGHT side. It seems no easy solution on this question.

    Hi Darren,
    Thanks for your reply. I've narrowed the problem down to this strange behavior only happening when the viewport component is a tree-table (a JTable with a JTree for a column renderer). The tree-table works okay in JDK 1.3, but not in JDK 1.4. When I remove the JTree column renderer, the table draws correctly, but without the tree. It looks like the viewport position is being set wrong somewhere.
    When a column is resized, an AdjustmentEvent is created. So that's why resizing the column looked like it had the same effect as the horizontal scroll bar.
    If you're interested, then I will be happy to let you know how I fixed it, if I can.
    The complete code that creates the scroll pane with the vertical scroll bar on the left is below. There's too much code to post the JTree column renderer.
    Thank you,
    Don
    m_leftScrollPane = new JScrollPane(m_sourceTable,
    JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
    JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    m_leftScrollPane.setComponentOrientation
    (ComponentOrientation.RIGHT_TO_LEFT);

  • Can you raise audio level on just the left side of a stereo track?

    Video with two lavs and two channels but capturing as stereo. One of the lavs is really low. Anyway to just raise that one side? I have Premiere CS5.52 and Audition 5.5 but don't see an obvious way to do what I need in either program.
    Thanks for any help.

    Jim Simon wrote:
    For myself, I prefer the Fill effects.  That'll center the channels.  You'll have to duplicate the audio track and use Fill Left on one and Fill Right on the other, but you end up with easily adjustable audio.
    But doesn't that leave you with two same mono tracks with the whole signal from both channels in there?
    For me the easiest way is either apply the Channel Volume effect from the effects panel to the audio clip in the timeline
    or, as Bill suggests, the Break out to Mono from the context menu to the source clip in the project panel.
    and keep smiling

  • Can we put multiple Database Polling within the asynchronous process

    Hi,
    Can we put multiple Database polling within the the same asynchronous BPEL process.
    There will be multiple Receive activities to receive the data from the poller.
    Saptarishi

    Hi Peter,
    I am using 10.1.3.4 and cannot use ESB/mediator.
    For the 2nd option,
    I have tried to put multiple receive's to poll data from a table but it does not work(it waits at the 2nd Receive). Let me try to elaborate the issue a bit.
    I have created a table for polling.
    The table has 3 columns :- transaction_id, status, is_read
    is_read is kept to implement the logical delete strategy of DB polling.
    What I need to do is to maintain a single instance of BPEL to maintain a transaction(which is uniquely identified by transaction_id).
    The BPEL should track the different stages of the transaction, i.e whenever a new row is inserted in the table with the updated status for a transaction, it must find the correct instance(by co-relating the transaction_id) and go to the next step (wait for the next receive activity) until all the steps of the transaction is completed.
    In the code, I created a correlation set consisting of transaction_id(only). The property transaction_id has an alias to the inbound variable's payload.
    In the first Receive, I checked the "create instance" checkbox. Also the correlation set is initialized.
    From next Receive onwards the correlation set is checked.
    The polling frequency is 5 secs.
    The first Receive works fine and the process is instantiated. But it waits at the 2nd Receive indefinitely.
    It will be very helpful if you can try this once. If you feel this is not the right approach, please guide me.
    Thanks and Regards,
    Saptarishi

  • HT201209 I entered the code for an app. Put my apple id after the code. Dialogue box said downloading, but no app to be found. Pls help. Thx

    I entered the code for an app. Put my apple id after the code. Dialogue box said downloading, but no app to be found on my iPad 3. Pls help. Thx

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Unfortunately she has been misdirecting folks with that update bug link for far too long.
    Candidly, when you see the Apple ID for a stranger appear in the Mac App Store (MAS) on your Mac regarding an update for an app that you haven't bought, it is a notice that you have a pirated app that you got from an outside source. Some trial version or a "free" version is actually a MAS version that someone has cracked and is distributing.
    Finding a pirated app
    All MAS apps have a MAS receipt in their app bundle. Check any app acquired from the MAS. Right click on the app's icon in your Apps folder and choose Show package contents. In the Contents folder is a _MASReceipt folder and in that folder is the coded MAS receipt. It has the Apple ID of the MAS account that bought/acquired the app from the MAS. It is that receipt that the MAS uses to alert you that an app has an update. There would not be a notice of an update with someone else's Apple ID showing in the MAS on your Mac, if there was not an app with a receipt from this person's account somewhere on your Mac.
    Download the free app FindAnyFile (FAF);
    http://apps.tempel.org/FindAnyFile/
    This app is easier to use and seems to be more powerful than Spotlight. Open FAF and in the box type _MASReceipt and press Find. It should come up with a list of every app on the Mac with a MAS receipt. Compare the apps with receipts in FAF's list with your purchased apps list in the Mac App Store. The odd app out should be the pirated app.

  • How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

    How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

    Hello,
    Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
    (Such convolution is worthy of Windows® in my estimation)

  • I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

    I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

    If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

  • On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?

    On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?
    In my current Firefox, the "new tab" icon/item from the "customize" pop-up window menu of items is placed next to my home, back, forward buttons near the top-left of my header (Button 1 for "new tab"). Then, the tab bar automatically come with a small tab (with a + sign) to the right of your last tab opened (so you click on + and a new tab opens. Button 2 for "new tab"). I like to have this "new tab" button twice (as a + mini tab, and next to my "home icon".
    When I upgraded to Firefox 4, I seemed to be only able to "customize" or use the "new tab" in one place. Either as an icon next to home button, or as a "+ minitab", but NOT both.
    What can I do to put this button in Firefox 4 on BOTH places???
    Your help is really appreciated. I want to upgrade, but I want my buttons on both places...
    I upgraded to FF 4, but downgraded again just because this feature... that's just me of coarse :-)

    *New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

  • I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    I would like to use the windows explorer open dialog box instead of the adobe open dialog box. How can I change that?

    The top screenshot is the Windows Open dialog box. All File > Open... commands in all Windows programs bring it up.   Try File > Open in Notepad for example.
    It belongs to Windows not Adobe. You cannot change this because there is no such thing as an Adobe Open dialog box.
    The bottom screenshot is Windows Explorer. It is Windows' OS File Browser, not an Open dialog.  It is not called up by Photoshop or any Windows program.
    You have to click on "My Computer" or a Folder icon to get to it. You can double-click a psd, jpeg or other image file in the Explorer window so that it opens in Photoshop.
    There is Adobe Bridge and Minibridge   Alt + Ctrl + O or File > Browse in Bridge

  • How can I put a music link in the page like this?

    How can I put a music link in the page like this?
    http://members.aol.com/trumanj/midi/tjsragtime.htm
    Thanks

    Hola JB
    No, I haven't...I'm trying to learn flash and it's been keeping me very busy...maybe it's the age..
    Len, I been trying to do it that way, but, as I just mention, Flash don't like me :)
    Thanks, I will do that for sure.
    Daniel Ulysses

  • Can we create two dashboard prompts for the same column in the samepage

    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideas

    863997 wrote:
    hi ,
    can we create two dashboard prompts for the same column on the same page,
    I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
    Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
    http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/

  • I have photoshop cs6 om a pc. My coumper guy took my old c drive and cloned it to a new oneand installed it. now when I go into  bridge it won't let me do any editing. I can't put stars or colors on the photos.

    I have photoshop cs6 on a pc. My computer guy took my old c drive and cloned it to a new one and installed it. now when I go into  bridge it won't let me do any editing. I can't put stars or colors on the photos.

    >I am trying to load my new programs onto this laptop
    Actually, no you're not. You're trying to load old programs on this computer - programs that are based around the old (dead?) Mac OS 9, not Mac OS X.
    The main problem is that Mac OS X no longer comes with Mac OS 9. If you want to run Mac OS 9 applications you can, but you'll need to source a copy of Mac OS 9 and install that before you can. Off hand I don't know of any sources for Mac OS 9.x. Apple no longer sell it. eBay might be an option.
    Either that, or just use Mac OS X applications. You'd probably prefer that anyway.
    Finally, as an aside, this doesn't really have anything to do with AppleScript, so posting in the appropriate forum might get you better luck.

Maybe you are looking for