Can I put new hardware into my Powerbook g4 1.67ghz

Hi Everyone,
I have a powerbook g4 1.67ghz, its a 15 inch model. Would it be possible to open up the laptop and remove all the old hardware and put in new hardware like a intel processor so I can run modern software like osx lion.
Thanks

Hello,
This is not possible to do. Your PowerBook has a different frame to that of a MacBook pro.
The Logic Board wouldn't fit correctly and any ribbon cables to the screen would differ.
They may look simalar on the outside, but they do differ internally.
If it was possible, like Niel has said, it would be much cheaper to just buy a used MacBook pro 15"

Similar Messages

How can i put one scene into JPanel of the swing?

how can i put one scene into JPanel of the swing?

980571 wrote:
ty for the information but i have a problen with JFXpanel when i try to into a panel it doesnt display insideSorry to hear that. If you want assistance with the code, feel free to post the relevant parts of it. Make sure to use \ tags when you do.

How can I put my bookmarks into the sequence I want, alphabetical or otherwise?

How can I put my bookmarks into the sequence I want, alphabetical or otherwise?

http://kb.mozillazine.org/Sorting_bookmarks_alphabetically <br />
http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

Can i put photos back into the camera chip once they have been imported into my mac?

Can i put photos back into the camera chip once they have been imported to my Mac?

Export them
File -> Export
to a folder on the desktop. From there copy them back to your camera.
Remember, the camera has a quite specific set up of folders, and you'll need to put the files back in the correct place for them to be viewable on the camera.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can i put below table into internalt table

how can i put below table into internalt table and want to add both internal table into 3rd internal table.
SELECT * FROM J_1IEXCHDR WHERE STATUS = 'P'.
WRITE: / J_1IEXCHDR-LIFNR,
          J_1IEXCHDR-DOCNO,
          J_1IEXCHDR-EXYEAR,
          J_1IEXCHDR-BUDAT.
SELECT * FROM J_1IEXCDTL WHERE TRNTYP = J_1IEXCHDR-TRNTYP
                          AND DOCYR = J_1IEXCHDR-DOCYR
                          AND DOCNO = J_1IEXCHDR-DOCNO.
   WRITE: / J_1IEXCDTL-EXBAS,
            J_1IEXCDTL-EXBED,
            J_1IEXCDTL-RDOC1,
            J_1IEXCDTL-ECS.
ENDSELECT.
ENDSELECT.
please help
thanks in adavaced.

hi laxman,
use for all entries and get the required data.
SELECT * FROM J_1IEXCHDR into table itab1 WHERE STATUS = 'P'.
if not itab1[] is initial.
SELECT * FROM J_1IEXCDTL into table itab2 for all entries in itab1 WHERE TRNTYP = itab1-TRNTYP
AND DOCYR = itab1-DOCYR
AND DOCNO = itab1-DOCNO.
endif.
so itab2 will have the common records...This will solve ur problem..
also u can do other method declare an final internal table with the common fields of the two internal table.
then after getting data in itab1 and itab2.
loop at itab1.
move-corresponding itab1 to itab3.
read table itab2 with key <give the fields> = ......
if sy-subrc eq 0.
move-corresponding itab2 to itab3.
endif.
append itab3.
endloop.
Regards,
nagaraj

Can't put the computer into sleep if VPN is connected

I think I have found a win7 bug. The problem is that I can't put my computer into sleep if VPN is connected. The VPN client I used is Microsoft VPN client. The VPN works fine. But if I click sleep button with VPN connected, the computer screen turns
black, the fan speeds up, and the signal light tells me the computer is still on, not in sleep mode. When I try to wake up my computer by tapping the enter key, space, or moving the mouse, it just doesn't work at all: the fan speeds faster and faster
and the computer heats up. The only thing I can do now to save my computer from darkness is to hit and hold the power button, powering off the computer. The sleep function works just fine if the VPN is disconnected. I can easily wake my computer up by tapping
the enter key. I don't know whether this problem is only present on my computer or universally present on all win7 computers.
The following is my system info:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer Microsoft Corporation
System Manufacturer LENOVO
System Model IdeaPad Y460
System Type X86-based PC
Processor Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, 2534 Mhz, 2 Core(s), 4 Logical Processor(s)

Hi,
Please collect the report for the further troubleshooting. Note:Please do the following steps when VPN is connected.
1. Click Start, type in “cmd”, right click it and choose “Run as administrator”.
2. Type in the following command.
Powercfg –energy
3. Find the report file in the location showed in Command window.
4.
Upload it.
Kim Zhou
TechNet Community Support

I can't put more music into my iPod touch 4gen

i can't put more music into my iPod touch 4gen

Do you have a question?
Why can't you pur more music on the ipod?
Perhaps if you were to explain you issue, then someone could help.

Can't drag new song into playlist

I just purchased a song and attempted to drag it from the "Recently Purchased" column to my "Christmas" playlist. I get a warning that says only iCloud songs can be put in iCloud playlists and the song will only be available on the computer if I proceed...but this IS an iCloud song. The button I am apparently supposed to select says "Remove Playlist." I'm pretty sure I don't want to do that.
I keep reading negative comments on forums about the iCloud and I have to say, it's been nothing but trouble for me so far. Can I simply remove it (without disrupting my library) and just take the $25 loss? It's not worth the hassle.

Just bought a new ipod
Where did you find a new 4G iPod?
all of the songs in the ipod show up as light gray on my computer screen
Because the iPod is set to Auto update.
I copied one song from cd, made new playlist of this song,
You don't have to put song into a playlist to put them onto the iPod. Playlists are an easy way to arrange music and select certain tracks.
Open iTunes prefs -> iPod. Set it to Auto update ALL songs and playlists.
Any new songs and playlists will go onto the iPod when you plug it in.

Can I put a class into a jsp??

I want to put this class into a jsp.. and reference it when I need it... can i just dumped it into a jsp... or do I have to do anything specific to it...
public class areaformat {
     public synchronized static String replace(String str, char oldchar, String newstr)     {
          StringBuffer sb = new StringBuffer(str);
          int len = sb.length();
          try     {
               for (int i=0; i<=len; i++)     {
                    if (sb.charAt(i) == oldchar)     {
                         sb = sb.replace(i, i, newstr);
                         sb.deleteCharAt(i + newstr.length());
                         i = i + newstr.length() - 1;
          }catch(StringIndexOutOfBoundsException sioobe)     {
               if (len == 1 && str.equals("'")) {
                    sb = new StringBuffer(newstr);
          return sb.toString();
Thx RIch

No, you can't. You can put only the function in the beginning of your jsp file like:
<%!
public void myFunction(...){
%>
So, you can use myFunction wherever you want in the page.
The other method is to compile your class in a file called "javac className.java" and the put the .class file generated in your WEB-INF/classes folder of your web-container.

HT1153 I've just put new batteries into my wireless mouse for my iMac and now it'll barely stay connected to my computer. It'll just keep disconnecting then reconnecting for a few minutes then disconnect again. Anyone have any ideas?

I've just recently put in brand new batteries into my wireless Bluetooth mouse for iMac and it continuously disconnects itself and will then reconnect itself for only a few minutes, just to disconnect again. It's become impossible to use my computer as my mouse smoky won't connect itself for long enough to do anything. Anyone had this problem before and could help me out?

HI:
It does not sound like a battery problem.
Try a couple of things:
1. Reset the SMC
http://support.apple.com/kb/HT3964
2. Reset (if you can) the PRAM
http://support.apple.com/kb/PH4405
If that does not help, delete the mouse in system preferences, turn it off, restart, and turn the mouse back on.
Barry
P.S. I only needed it once, but I have an old USB mouse in case my Bluetooth one decides to quit.

How can i put a file into blob(using sun.jdbc.odbc.JdbcOdbcDriver)

Hi
i tried to put a file into blob , but got a problem.....
My environment:windows 2000pro,JBuilder 5.0 enterprise,oracle 8.1.6,(not install oracle jdbc driver )
a part of program(my program is very uglily,if anyone want,later i paste it ba....~_~)
//Statement stmt2=null;
//Resultset rs2;
//opa1 is the blob data
void saveBlobTableToDisk(Connection con) {
try {
stmt2=con.createStatement();
sqlStr2="SELECT * FROM emp3 where id=1004";
rs2=stmt2.executeQuery(sqlStr2);
while (rs2.next()) {
Blob aBlob=rs2.getBlob("opa1");
i got the exception :
" null
java.lang.UnsupportedOperationException
     at sun.jdbc.odbc.JdbcOdbcResultSet.getBlob(JdbcOdbcResultSet.java:4174)
     at test3.Frame1.saveBlobTableToDisk(Frame1.java:48)
     at test3.Frame1.<init>(Frame1.java:26)
     at test3.Application1.<init>(Application1.java:5)
     at test3.Application1.main(Application1.java:8) "
and the windows pop up a messagebox said that(about) my memory "0x09af007f" could not read, error in javaw.exe .
Later i used (ResultSet)getBinaryStream() to solve it. but getBinaryStream() only return a InputStream,so that i can make blob to a file,but i can't make a file to blob using jdbc.....
I am very stupid that installing sun java, oracle jdbc driver etc....(because i must set a lot of thing such as classpath,java_home etc), Can i only use JBuilder to do that ?
Or i must install oracle jdbc driver ?
Thanks.

My guess here is that Sun's JDBC-ODBC bridge doesn't handle the BLOB datatype. Most ODBC drivers don't support that datatype, so I wouldn't expect the bridge to.
Is there a reason that you can't use the Oracle driver?
Justin

How can i put a file into blob using jdbc !?

Hi
i tried to put a file into blob , but got a problem.....
My environment:windows 2000pro,JBuilder 5.0 enterprise,oracle 8.1.6,(not install oracle jdbc driver )
a part of program(my program is very uglily,if anyone want,later i paste it ba....~_~)
//Statement stmt2=null;
//Resultset rs2;
//opa1 is the blob data
void saveBlobTableToDisk(Connection con) {
try {
stmt2=con.createStatement();
sqlStr2="SELECT * FROM emp3 where id=1004";
rs2=stmt2.executeQuery(sqlStr2);
while (rs2.next()) {
Blob aBlob=rs2.getBlob("opa1");
i got the exception :
" null
java.lang.UnsupportedOperationException
     at sun.jdbc.odbc.JdbcOdbcResultSet.getBlob(JdbcOdbcResultSet.java:4174)
     at test3.Frame1.saveBlobTableToDisk(Frame1.java:48)
     at test3.Frame1.<init>(Frame1.java:26)
     at test3.Application1.<init>(Application1.java:5)
     at test3.Application1.main(Application1.java:8) "
and the windows pop up a messagebox said that(about) my memory "0x09af007f" could not read, error in javaw.exe .
Later i used (ResultSet)getBinaryStream() to solve it. but getBinaryStream() only return a InputStream,so that i can make blob to a file,but i can't make a file to blob using jdbc.....
I am very stupid that installing sun java, oracle jdbc driver etc....(because i must set a lot of thing such as classpath,java_home etc), Can i only use JBuilder to do that ?
Or i must install oracle jdbc driver ?
Thanks.
D.T.

My guess here is that Sun's JDBC-ODBC bridge doesn't handle the BLOB datatype. Most ODBC drivers don't support that datatype, so I wouldn't expect the bridge to.
Is there a reason that you can't use the Oracle driver?
Justin

How can I put my system into StandBy Mode?

Hi
I am not able to put my system into stanby mode.
How can I do that?

Hi
As Ivan said you can use these two options.
Furthermore I would recommend checking the settings in the Toshiba power saver (if is installed)
Possibly you have to activate this option before using.

Can i add new language into my L1520?

Question is simple, can i add a new language into my L1520 ? I bought it in Russia, and in options menu i just found several languages like spanish,english,french,Azerbaizhanish,even if chanise. But i need Turkish language. Can i download it somehow?
Your help appraciated. Thanks in advance
Currently using giant, amazing black Lumia 1520
Solved!
Go to Solution.

If it's not listed in language+region settings, then you cannot download it, maybe that's why Nokia did not release it in Turkey yet
BTW, you would get the same answers from same person in your own language if you've visited local boards
The silence will fall

How can I put the signature into the data file.

Hi all,
I want to put the signature into the data file, mean the data file will be on the top and the signature will be at the buttom.how can i do that?
Thanks.
example:-
dataFile.txt
Name=...
Address=...
Signature=6A07C70E....123FEAB(Hex)

Thanks for your reply.
First, i have a keypair (public key and private key).
I use the private key to initialize the Signature and
use the Signature to sign a data file ( dataFile.txt) .
So when i need to comfirm the data file not being modify
I have to verify the data file with the Signature and the public key.
I hardcoded the public key in my program so my client (receiver of data)
need only the Signature file and the data file (2 files).
So how can i combine the Signature file and the data file into 1 file?

Can I put new hardware into my Powerbook g4 1.67ghz

Similar Messages

Maybe you are looking for