Can i raise the time limit in print server?

Hello,
we have here a SL-Server that currently handle our macs.
Now we have the problem, that we receive print jobs from our IT in Australia and that the printers that will receive the jobs cancel this because they receive the information not fast enouth.
We have a print solution with Fiery here and this RIP can handle this, because we have there a high time frame to receive the jobs. But Fiery can not handle all of our printers.
Now I will activate the print service in my SL and i need the information if i can raise the timeframe there.
Or have SL-print service ano time limit?
Many thanks
Arminius

To my surprise that is not possible. Although, surprise...
You could put in a feature request here:
http://www.apple.com/feedback/logic-pro.html
and/or here:
http://www.logicprohelp.com/forum/viewforum.php?f=41

Similar Messages

I locked my iPad and I don't want to wait for the time limit. How can I reset it?

My brothers locked my iPad and I can't wait for the time limit to unlock it. Is there a way to reset it?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

How can I eliminate the time zone in the printed version of ical.

How can I eliminate the time zone in the printed version of ical.

http://www.apple.com/feedback/macosx.html
Send feedback to apple about changing this back.
There is no native way to do this.

How can I extend the time I am timed out on the new Firefox version?

The new version of Firefox which I recently installed times me out after a very short period of time. I can I extend the time that Firefox times me out to at least one hour of inactivity.
== This happened ==
Every time Firefox opened
== right after I installed the new Firefox version today

If you have an Exchange account on your iPad for which the admistrator has specified a limit on how long you can set the auto-lock, the only way to change it is to remove the Exchange account. Once you put the Exchange account back on, the restriction will be back in place. Apple has nothing to do with this.
Exchange admistrator often require that devices be passcode protected and that the device will autolock so they delete the "Never" setting.

Problems with the time limit in PCI6602

Hi,
I am using a counter-timer PCI-6602 to scan a sample.
I’m using Counter0 as a pulse generator to generate a GATE signal and Counter1 as a counter, and the mode is event counting.
J'd like to have a more precise definition about "time limit". If I used a GATE frecuency of 1KHz (1ms integration time) and a SOURCE frecuency of 10KHz with a time limit of 1sec, I measured1000 times a 10. That’s OK but that also means that I need to be 1 sec at each position!!!! And this is a lot of time!!! If I changed the time limit form 1sec to a fraction of a sec (300 ms for example) it doesn’t work. Why?
Could anybody help me! Thanks,
Lala

Lala,
What exactly do you mean by "I need to be 1 sec at each position"? Are you trying to interface with quadrature encoders? It is possible to perform a buffered period measurement which will sample the position once per second (hardware-timed). It also sounds like you are using Traditional NI-DAQ. Would it be possible to upgrade to NI-DAQmx? This API is recommended for new designs. Also, are you using LabVIEW or a text-based language. In the LabVIEW Example Finder (Help->Find Examples), search under "Hardware Input and Output->DAQmx->Counter Measurements->Position" for the Meas Angular Position-Buffered-Cont-Ext Clk.vi example. You can also use another counter to clock this buffered measurement. If this does not sound like what you are trying to accomplish, please let me know a bit more about your hardware and what you intend to do with it. I'm sure I could then recommend a better method.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

How can I enforce a time limit across 2 iMacs?

I have 2 iMacs in my house, 1 is my lil sister's iMac and one is mine, hers has gotten old and slow. On it she has parental controls allowing her to be on for certain times of the day for a certain amount of time. I'd like to make her account on my computer that she can use also, but I want to enforce the same parental controls as on the other iMac. My problem comes in with, how do I get the time limit to sync between the iMacs? So that she can't in theory use one imac till her 2 hours is up then come use mine for a bonus 2 hours; instead she should be restricted to 2 hours no matter wich iMac she divides up the time on.

I havent tried this but you might be able to sync the preference for parental controls between the two computers via sync software such as Chronosync, dropbox or maybe even iCloud. I dont know of any quick way to do that and this method is getting into a more advanced configuration. Its interesting to see in mountain lion that you can copy and paste the settings by clicking on the gear icon in System Preferences:Parental Controls. What system are you using on each machine?

HT201304 Can I enforce a time limit on user restrictions to prevent excess use?

Can I enforce a time limit on user restrictions to prevent excess use?

I havent tried this but you might be able to sync the preference for parental controls between the two computers via sync software such as Chronosync, dropbox or maybe even iCloud. I dont know of any quick way to do that and this method is getting into a more advanced configuration. Its interesting to see in mountain lion that you can copy and paste the settings by clicking on the gear icon in System Preferences:Parental Controls. What system are you using on each machine?

As an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

as an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

Parental Controls can be used to set time limits, to allow the computer to be used only within specific hours of the day, and to block certain Web sites (or to allow only certain Web sites). However, they can be applied to a Standard account only, not to an admin account.

Can I place a time limit on my daughter's iPod?

can I place a time limit on my daughter's iPod?

Sure. Set an alarm on your phone, or a kitchen time, whatever, and when it goes off tell her to put the iPad down.

Raising the size limit on mailboxes

When will Verizon raise the limit on sub-mailboxes from the very low 200MB to something higher. These days storage is much cheaper so they should be raising the mailbox limit to at least 1GB for all mailboxes.

mdegrushe wrote:
When will Verizon raise the limit on sub-mailboxes from the very low 200MB to something higher. These days storage is much cheaper so they should be raising the mailbox limit to at least 1GB for all mailboxes.
At a guess? They won't. Email is not a "main" product in Verizon's eyes. Keep in mind that this is a peer-to-peer support forum.
If you want to get information from Verizon, you should contact them directly via one of the options on their Contact Us page.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Can't visualize the time on the weekly view on ical

Can anyone help me out, I can't see the times on the left of the ical panel in the weekly view and I can't seem to change this in preferences. Has anyone had this problem?

I have a similar problem, have endured several calls to apple care, two trips into the genius bar, had 2 computers rebuilt and after all that, the first sync with MobileMe restored the problem. My profile/preferences only recognises the hour 5:00AM and the hour markers on the day view and week view all say Sat AM, Sat PM in every hour. Please help. This is driving me crazy. I'm pretty sure it has to do with Preferences. If I create another account, iCal is fine on that account.

I can not change the time in activity Appointment in WebUi

Dear Experts!
I can not change the time in activity Appointment when creating: calendar -> month -> click on the day
snapshot of problem:
http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba
When I create a Appointment (Activities -> Create Appointment) of all good:
http://imglink.ru/show-image.php?id=ef65a38bdf7fc77eb9a71ec5c3ad5603
Help me this problem?

You need to add that attribute using the config tool for your view configuration. Select the attribute All Day from the context node BTDATE in the available fields to your display field and then save it. It should now be visible in your UI and now you can select or uncheck it to make the time field enable. Check the below image
http://imglink.ru/show-image.php?id=a9a660778c0fee2b3fd7409d620eddc5
Regards,
Shobhit

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

How can I increase the character limit of my text messages for Droid Maxx 4.4?

How can I increase the character limit of my text messages for Droid Maxx 4.4?

Send as a MMS.

Can i raise the time limit in print server?

Similar Messages

Maybe you are looking for