Can I re-charge the Battery in the FiOS BBU (after all it is basically a 12v Motorcycle battery..)

(I don't even have FiOS Digital Voice service anyway...so I don't care if the battery dies I will just take it out...I see no reason to buy a battery (at my expense ) for a service I don't have. 
I also don't see why I need to buy a battery for Verizon's Equipment that I am renting..Because if I buy the battery it becomes my property...and I can therefore take it with me when I leave the premises)

Mysticinva50 wrote:
.. I am buying a service NOT leasing their equipment ... I am not responsible for maintaining their equipment ... if the ONT fails...then Verizon will be required to attend and rectify it ...
Semantics aside, failure  of the ONT battery is not classified as "ONT failure."  In similar consumer transactions, users are responsible for disposable components, and the battery in question is disposable.  If you want the ONT battery replaced you will have to do it.  This is clearly stated in the VZ TOS, to wit:
http://www.verizon.com/battery
When your remote control batteries expire, please don't spend time waiting for VZ to ship packages of AA batteries.  It's just not in the cards.

Similar Messages

  • Why can't I charge my Iphone 4s on the actiontec router rev I?

    I mean with rev E I could charge my IPhone and with the rev I I can't? Why can't I charge my iphone with the actiontec rev i. I mean the actiontec rev I have 2 blue USB sockets so many usb 3 but it won't charge my Iphone 4s why not when the rev E could? The usb light lights up but no charging to my 4s why not and when I take my iphone 4s from the charger the lights go out but with the charger still on there but not my iphone on the charger.

    skyliner34 wrote:
    I don't know what you mean by "right pins". I switched the action back to my rev E since I can't charge my iphone and the rev E can.
    I really don't have an answer, other than USB 3 is different, the standard includes 5 more wires in the cable and associated pins in the connectors at each end of the cable. As far as I know the power connector pins are the same for both USB 2 and USB 3, but as I said, my Android phone powers just fine from my Rev. I router, just as it does from the USB 2 ports on my older Actiontec, laptop and DVR. So the USB 3 ports on my Rev. I router most definitely provide power to my Android phone.
    Do you have any other devices that offer a USB 3 port that you could try to charge from? Or maybe some other phone or device that you could try on your Rev. I router? If not, maybe you could borrow another cable just to see if your iPhone will charge from the Rev. I router.
    Of course it is also possible the USB 3 ports on your router are defective or not powered up for some reason. Do you have a neighbor or friend with a Rev. I that you could test with, or maybe a Verizon store nearby that you could see if it will work there?
    I'm sorry, but that is all I can think of for now. Hope you can get it figured out.
    Justin
    FiOS TV, 25/25 Internet, and Digital Voice user
    QIP7232, QIP7100-P2, IMG 1.9.4
    Keller, TX 76248 (VHO 1)

  • With Firefox 4 I can't print a shipping label off the post office's website (click 'n ship) like I used to with Firefox 3

    I go through all the steps to print out a shipping label when I am on the post office's website for click 'n ship, but the website won't communicate with my printer (when I am in firefox 4). So I switched back to Firefox 3 and have no problems.
    This happened before in the beta version and I had to switch back to Firefox 3, so I was happy to switch again to Firefox 4 when the completed version came out, but the problem came up again and after all the steps were done to complete the shipping label and I hit the print label button, my printer connection window never popped up so that I could click on it to command my printer to print the label. I am a registered user of click 'n ship on www.usps.com

    After waiting forever to talk to some jerk at USPS Click and Ship help, he told me it's an Adobe issue. I didn't ask why it just started happening, but I too just updated to Foxfire 4 recently, it must have something to do with it.
    Open your Adobe reader... under programs...mine is called Adobe Reader X
    Go to "Edit" in top left...click "Properties"...
    Uncheck "display PDF in browser",
    Then restart your computer for it to take effect. I am so thankful it worked!

  • Can anyone pls..  give me the material for sales information system?

    hi,
    good evening to all gurus,
    this is arunteja vasan
    pls.. if anybody have material for SIS, u will send me.
    thanks to all.

    Hi,
    1.create information structure by selecting the key figures and characteristics. After creating the information structure u must activate and generate.
    2.include updating rule for information structure. After including the updating rule the information structure u must activate and generate
    3.select the updating rule is whether for day, week, month, or year by double clicking on the information structure.
    4.Maintaining all seetings ie; customer statistics group, materialstatistics group, sales document, sales item, billing document, and assign all these to sales document type, sales item, billing type,
    5.Assign sales area to updating rule.
    6.check the sales area whether all settings are maintained or not.
    7.maintained customer statistics group in the customer master record, and material statistics group in the material master record.
    8.After all the settings use T.c. MCSI enter the sales area customer material and see the results, now u get the report or sales of a particular customer or organization.
    Note: Before doing the last step create a sales order, delivery, AND billing.
    Award points if useful.
    Regards,
    Amrish Purohit

  • HT1657 i tried to rent a movie but it did not work and i was charged away. How can I have charges reversed?

    Hello,
    I tried to rent a movie but it did not work and I was charged away. How can I have charges reversed?

    Try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Displaying the title of the open panel when attached to a window...?

    This is probably a really obvious question... but when displaying the open panel as a panel/sheet attached to another window - is there a way to display the panel's title, or some other way to prompt the user?
    For example, I have a preferences window that the user can click a variety of controls, several of which display the open panel... I'd like some way to remind the user which path to select (eg. "Select the path for BLAH").
    One way around it is to temporarily set the title of the window the open panel is attaching to, but I have several windows, and the panel may attach to any one of them... I'd rather not test for each possibility (because, for example, the nib for that window might not be loaded yet, etc.).
    Any ideas?

    Wow, I should probably get some sleep...
    The answer is obvious... after all, I need to know which window to attach the panel to.

  • HT4623 I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3.  That is the only update that showed up on itunes as available.  The download took 3 hours and after that the phone is the same and does not show any sign of being updated.  Please hel

    I tried to update my husbands iphone 4 to ios 6 from ios 4.3.3  That is the only update that showed up on itunes as an availiable update.  The download took 3 hrs and after all of that the phone is the same showing no sign of being updated.  We did turn it off and back on and still nothing.  Can anyone please help and tell me what I need to do to update his phone.  He is unable to update or downloaded apps or anything off of itunes at this point.
    Thank you,
    Tammy

    So what happened to the phone during the process?  It should have gone black and restarted a couple of times and there would have been a white progress bar as the update installed.  Sounds to me like you've downloaded the update file but not actually installed it.  The quickest way to see version of the software is installed is to go to Settings-General-About and check Version.

  • Recently got a new iPod 4th gen; I had previously backed up to iCloud and subscribed to iTunes Match, and then wound up syncing the new iPod to my MacBook Pro; all iCloud tunes were downloaded to Mac but won't all sync to the iPod - any suggestions?

    Recently got a new iPod Touch 4th gen; I had previously backed up to iCloud and subscribed to iTunes Match, and then wound up syncing the new iPod to my MacBook Pro; all iCloud tunes were downloaded to Mac but won't all sync to the iPod after multiple attempts, despite all songs showing properly on the Mac and multiple syncs occurring after all songs were properly reflected on the Mac.  I updated iTunes Match from the iTunes Store menu as well pre-sync.
    I should mention that I had previously had the library on a Dell (which is still running) and shared it on my home network.  While all iTunes purchases now show in the Dell, the Mac is the device I use for all syncs. 
    There appears to be no rhyme or reason to the iCloud physical sync failure - some songs were legacy, some were purchased via the PC, some on the old iPod.
    The Mac shows all the songs correctly and none show iCloud status -all have been downloaded, but the downloaded songs that were previously showing up as iCloud based aren't syncing to the iPod.
    Is there any way to force all music being seen by my iPod as iCloud to download to so I can listen to them offline?  Is there a way to force the sync from iTunes?

    The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts.  Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
    The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
    Otherwise the deleted contacts are gone.

  • I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

    I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

    Hi!
    I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

  • Aperture 2.1.4 & SL -- Any Light at the end of the Tunnel?

    On my Macbook, Aperture with SL dies just after the initial screen comes up (the one with the SN, etc). Activity Monitor and Force Quit suggests that it is running, but just not ever getting to the main screen. I've read through the long threads here discussing this and similar problems, replaced the Framework file, and completed all the steps in the Apple Tech support note HT2945, up to and including a database rebuild, removal of pref, presets, etc, and reinstallation. and update. The ONLY way I can get to a working screen now is to delete prefs, start with ALT-CMD, and do the consistency check. It then comes up with a basic screen that lets me navigate projects, etc. The part that seems to consistently kill it involves accessing anything associated with the vault. The screen redraw goes flaky and the whole thing grinds to a halt. I have masters relocated to a network drive -- something that worked fine up until the recent upgrades.
    Aperture 2.xx worked like a charm on this Mac up until a couple of months ago. I'm feeling a bit let down by Apple on this. Thirty years of pictures essentially unavailable. Anyone have any suggestions on next steps?

    Ben wrote:
    Emory wrote:
    Are you really trying to say that I should be greatful for getting any email at all on a device sold and marketed for mobile email? You really think they're giving something away for free?
    Of course not, its still a business, and business generally like to make money. However the BIS server is designed as a "Consumer" level of service, and isn't targeted towards the business segment. That is after all what BES is designed to do.
    IMAP support is a relativly recent addition, and like anything else thats been added in the past, I'm sure its support will be expanded.
    The BES is designed to manage, deploy, and enforce policy on mobile devices and enable them to talk to proprietary email services/groupware that they otherwise wouldn't be able to talk to.  
    I'm not asking for the world here -- I just want IMAP support to mean that RIM actually supports IMAP.  I'm not an enterprise.  I have no interest in hiring a company to maintain an Exchange infrastructure for me.  And even if I did, I could use ActiveSync with a variety of devices that still wouldn't require a BES.  But that wouldn't be a BlackBerry device, and I'm rather fond of mine.  
    While I can appreciate that the BIS is a "Consumer" level of service, that doesn't mean that we're not looking for so-called "Big Business" features like having more than one folder for email.  It means that some consumers don't like flushing money down the toilet to support an architecture like Exchange.  Steering people towards a BES means you're really just steering them away from RIM. 
    We're able to do much more, with less resources, relying on open services: Cyrus IMAP, Postfix MTA, and a *wide variety* of MUAs.   Why I would scuttle cost-effectiveness and instead opt to spend around $2800 to get a single-user license for the BES on top of the hardware and software costs of Exchange is completely beyond me. 

  • I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

    I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

    You should be able to use the battery if you get a car type charger which recharges mobile devices.
    The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
     Cheers, Tom

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    Startup – Black screen with cursor
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Ever since I downloaded IOS 5.0.1 and the so called battery update my ipodtouch 4g can be fully charged play a few songs and its dead

    ever since I downloaded ios 5. and the battery update on my ipodtouch 4gen it can be fully charged play like three songs then it says 20%left then it dies. My ipod was fine before the download.

    Try the standard fixes:
    - Reset. Nothing wil be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem than an appointment at the Genius Bar of an Apple store is in order.

  • HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

    if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
    please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

    Just connect it to a computer's USB port.
    Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

Maybe you are looking for