Can I re-conforma a timeline from Premier pro  to Audition?

Hi,
Tha'st the question can I update a seq from ppro cs6 to a older seq in Audition. have add new clips and audio and wish not to redo it all.
Thanks.
trevor

I have a seq in Premier Pro where I have once before taken it to Audition and done a lot of work (suck)
Now I have had to make some changes and would like to take the new seq in PP back to Audition and just work with the new added audio clips and timing.
Back in the day of Fcp and sound track you could do this, so I am hoping one can do it here it was called re-conforming.
but I can't find any thing on the web which say you can or not.
Hope that helps

Similar Messages

  • Each clip is precomposed when dynamic linking a timeline from Premier

    When I'm sending a timeline from Premier Pro CC to After Effects CC all of my video clips are being pre composed individually in the after effects composition.
    The last project I worked on had the same workflow except when they came into after effects the videos were not pre composed.
    From the PP timeline, I'm selecting all the timeline media and choosing 'replace with AFX comp!
    Is there a way to choose to precomp everything or not from a Premier timeline? I don't want each media to be precomposed!

    Thanks Todd,
    I can see that's the case as I went from a 1080 timeline down to 720P and used 'Scale to Comp'
    Causes havic in AFX if you have used different sections of the same clip in your edit.
    So I guess the work around would be to manuelly scale everything in the clip settings.

  • How do I Import footage from Premier Pro CS3 to After Effects?

    Hi
    As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
    Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
    Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
    I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
    Any help
    Thanks.

    I am still not getting this.
    I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
    Having searched loads for this I can find no other answer than copy & paste.
    Please please could you guy be more specific with your answers as I just can't figure this one?

  • Extraction to Edit in Audition from Premier Pro is messed up!!!

    So evidently, Right clicking the clip the premier pro time line and editing in audition screws up the extraction process creating a tiny file that does nothing.
    My work around for my solution I figured out myself is to do this:
    Right click the audio file in the media browser and open into audition from premier pro. The extracted file I then edited in audition and then had to drag the extracted file from media browser in premier pro to the timeline sequence.
    BTW, Adobe Phone Support is complete crap. I seemingly got hung up on after a long time of silence and being asked to hold on as he appears to look into my situation.
    I can make it work but it doesn't work the way Adobe intended I presume.
    Pretty irritating. Any help is appreciated. Thank you in advance! !

    How big is the audio file?  Premiere cannot extract audio greater than 4gb.  It is limited to old WAV file extraction.  It doesn't support import of WAV larger than 4gb either.
    TIPS:
    1.  If you have big audio in timeline, use blade to clip it up, and then select all clips and edit in audition.
    2.  In Audition, if you have a large WAV stereo file, split it up to mono channels.  If it is still too big, export it to MOV or AVI with Linear PCM data (same data, just a different file wrapper) and it will not matter how big the file is.  You can import that to Premiere just fine.
    3.  If you are working with 5.1 audio, always EXPORT to a MOV or AVI file in linear PCM.  You will retain 5.1 track data, and it will import as a single track in Premiere that you can adjust in audition where needed, or use a mixer in premiere to get it right.
    4.  If your audio is stereo and 1-3 hours, 48k16bit will be huge and 96k at 16bit will kill the WAV file limit at 1.5 hours.  Separate the channels and you should be okay.  With 5.1 of the same length, you might also get away with the same channel separation.  Beyond that, you'll need a different file container.  If you still wish to separate audio, do so, it won't hurt anything.

  • DirectLink from Premier Pro CC 2014 to Encore - no longer there

    Trying to get a Premier Pro CC 2014 sequence into Encore CS6 - and it won't happen.
    The DirectLink from Premier Pro CC 2014 to Encore - is no longer there and I've tried simply dragging the required sequences over from the PP CC window into the timeline bin in Encore - it won't do it.
    I've tried importing sequences and after clicking on the project to open and select the sequences from it just sits there with a portion of yellow progress bar about 5mm long - doesn't move on.
    I am now trying to build the DVD project by putting all materials on one sequence, with chapter markers on it and pushing out a media encoder file in H.264 first. Maybe this will import to Encore.
    Hating the fact these two sister programs no longer talk or work together - losing Encore is a major headache.

    Thanks Stan,
    Interesting you say "Dynamic link only works between like versions. So the only DL for Premiere with Encore CS6 is Premiere CS6" and then show me a video where the guy's first screen pops up with "Using Premiere Pro CC & Encore CS6".
    This is the latterday workaround to cover the issue of the removal of the directlink from PP CC 2014 to Encore - which does cover my issue - however I find it strange that Adobe choose to make great play of the DirectLink facility - now employed between programs such as PP CC 2014 and SpeedGrade - yet have deliberately destroyed a great working relationship in the same manner between PP CC 2014 and Encore.
    I find this "dictatorial" deduction a real nause...

  • Do I need to re-install the WHOLE suite or can I just install just Encore and Premier Pro?????

    I'm having a problem with my Encore and Premier Pro software. I have the Adobe Creative Suite Production Studio Premium CS5.1. Encore will not allow me to burn DVDS. I'm getting an 52102 error...won't allow it to finish writing...ALSO Premier Pro stops after capturing about 5 or 10 minutes of video and freezes...do I need to re-install my software??? and if I do... do I need to install the WHOLE suite or can I just install just Encore and Premier Pro????? I can burn and image file and it burns DVDs on my old Corel software so I know its not the burner or the DVDs I'm using..I am in the middle of a big project for kids at school really need to figure this out...not getting anywhere online. Can anyone help??? Has anyone had this problem?  Hope I'm posting this to right place. THANKS!

    I haven't had 52102 error, but seen it discussed. Here are a couple of links
    Error = Sense Code 52102
    Encore Hardware Error Sense Code 52102
    Burning the iso file to the dvd may not be the same process as burning directly from Encore to dvd, and so may not exhibit the same error, if any. See response 1 in the first link.
    As to the capture problem, look here
    Troubleshoot digital video capture and playback | Adobe Premiere Pro

  • Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

    Hi, I would like to synchronize the calendar's items of my iPad Mini with my MacBook Pro. At today I can only do the reverse operation (from MacBook Pro to iPad Mini). Can you help me maybe with a little tutorial or something? Many Thanks.

    Hello there Tonynos.
    The following Knowledge Base article should help with guiding you on how to synchronize information from your iOS device to your computer:
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Thanks for reaching Apple Support Communities.
    Cheers,
    Pedro D.

  • How can i force eject a cd from mac pro no icon on desktop or in finder, how can i force eject a cd from mac pro no icon on desktop or in finder

    how can i force eject a cd from mac pro no icon on desktop or in finder, how can i force eject a cd from mac pro no icon on desktop or in finder

    Restart the computer and hold down the trackpad down.
    It will take a while.

  • Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?

    Can't figure out which upgrade (from 7 Pro) is smartest: 9 Pro? or X Pro?
    Should I just ignore the nay-sayers and go ahead with X Pro?
    Thanks in advance for anyone willing to bring me up to speed.
    Dharmamitra
    Kalavinka Press
    Optional & Extraneous background data:
    I've taken a break from book design, layout, and publishing since finishing 10 books 2 years ago (Kalavinkapress.org). But now I'm back into the thick of it with a another flock of long-doc books in my lap.
    Result, I'm now faced with upgrading my IDCS3 & Acrobat 7 Pro. (I'm still OK with my P-shop & Illustrator versions), but am utterly clueless about the advisability of Acro X Pro over the still-available Acro 9 Pro. (I've seen some fairly loud squeaking about X Pro problems.)

    It depends a bit on what you're going to use it for. I do mostly forms work and have both versions, but do most of my work with Acrobat 9, and even use Acrobat 7 for some things. There are some initial bugs with Acrobat 10 that need to be worked out, but I'd probably recommend it for most folks.

  • I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
    Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
    Get CS6 Apps from Cloud Subscription:
    Download previous versions of Adobe Creative applications -
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

    I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • Why am I not getting the audio when I send a video from Premier Pro to encor to make a DVD?

    I created a video with only one audio track.  It plays perfectly in Premier Pro
    Then I send it to encor to make a DVD.  When I play the video in the monitor in encor, there is not sound, audio track
    What am I doing wrong.  I have done this successfully many times before

    To further add to the equation if I go to System Preferences and switch my output from my MOTU Firewire to the internal speakers of my Mac Pro I can hear the clip I just dragged and couldn't hear before in the Timeline AND when I then switch back to the MOTU I can now hear that same clip I just dragged in the Timeline.  But if I drag a new clip from Events to Timeline then I cannot hear it again until I go through this same song and dance.
    Help?
    Weird... It appears that there is a problem with the audio not being routed to the right output.
    I don't have a MOTU interface, but could it be that there is an updated driver for it?
    Also, I'd try to let OnyX run its cleaning and maintenance routines.
    If all else fails, at least you can shorten the workaround: you don't need to go to system preferences to change the output for sound. Just option-click on the volume icon in the menu bar and select the desired choice.

  • Encore having trouble loading my sequence from Premier Pro CC.

    I have made DVD's before with Premier Pro CC and Encore, but today it is stalling when I try to import my timeline from PPCC. It says," Import Premier Pro Sequence. Loading." It will stay on this for hours not moving. Is Something wrong with my Encore? Is something wrong with my sequence?

    You can't import a sequence from Premiere CC to Encore CS6, you have to export the video out of Premiere as a Mpeg2dvd and import the two files, one audio and one video, into Encore. Encore CS6 is the last of the Encore releases and will not directly link to any of the CC programs.

  • I've Got The HDV Capture BLUES From Premier Pro CS6

    I am attempting to capture HDV footage from my Sony Z1U camera in Premier Pro CS6.  When I do so, the file type saved in my designated location is an MP3 file, which I know is not correct.  The captured footage never gets into the program, it just remains on the disk as an MP3 file type.  Then when I try to Import that file into Premier Pro from the disk, I get an error message saying "There Was An Error Decompressing Audio or Video"  Does anybody know why a captured HDV file would wind up on the disk with an MP3 type name?
    Thx.

    You scared me a bit. I upgraded from Premiere Pro CS3 to Premiere Pro CS6 and I haven't had a need to capture anything yet. So, while I do like using HDVSplit, I thought I would try capturing from my Sony HDR-FX1 just to see what happens.
    I turned off the PC, got out the camera, connected the Firewire cable (I blew the firewire port on this camera once. I will NOT do it again.)
    I started a new project. Now, the first thing I noticed was that the default is to capture DV. So I changed that to HDV.  See the image below:
    After that, it was a simple matter to capture the HDV. I dropped it on the "New Item" button to create a new sequence with the exact right properties. Then I trimmed it a little on each end. It was so cool that there was no line above the clip, meaning that no rendering was required. It never used to be so easy. I then used the Vimeo 1080 60p preset and uploaded it to Vimeo. No video or audio effects. This is how it was recorded.
    So, since it worked for me, let's see if we can get enough details from the people having trouble and see if it is user error or a bug I didn't see.
    Oh, just in case there are any Disney World fans, or anyone who just loves Christmas lights, here is what I captured.

  • Colour correction for H.264/YouTube export from premier pro cc, help.

    Hi, I am just finishing up a project that I put together in Premier Pro CC and SpeedGrade. I did a little test export, as it's for YouTube I used H.264. On looking at it afterwards it looked washed out with the blacks losing there depth, the saturation dropping and a loss of contrast. I tried checking on a few monitors and then tried uploading a piece to YouTube and it looks the same across the monitors and the same on YouTube this washed out drab change. So I tried reimporting the export back into Premier Pro and it looks fine in Premier Pro and SpeedGrade. I can go back and push my blacks and whites but it'll have to beyond 0 and 100 to get my contrast back and it feels wrong using the scopes like this. Dose anyone know what I might be doing wrong?

    Yes that's how I'm working. In Premier Pro CC and using the direct link to SpeedGrade then back to Premier Pro and exporting from there. I'm not sure you even can export from SG if you use the direct link from PP. I'm unsure now if it's the H.264 to blame, I tried a few other's and they also look washed out. At present I'm having to go over my old grade, that took days, adding more contrast and saturation seeing if I can get an acceptable image when I export.
    I have tried AVI uncompressed, a few flavours of H.264 including some of the pre set ones like the YouTube ones and some image sequence's. The JPEG sequence was fine, same colours and contrast as within Adobe but all the H.264 and the AVI were washed out no matter what setting I put them on.
    In the picture below you can see from the left first a waveform then the image in SpeedGrade with the scopes showing the blacks well below 0, next the same image back in PremierPro, then the exported H.246 file.
    and here are the settings.

Maybe you are looking for