Can I re-install fcp7 AFTER installing fcpx

Now that I've somewhat committed myself (a good choice of wording) to FCPX, I think it might be prudent to re-install FCP 7 (studio 3), which I had dumped. I have read the help page on how to install fcpx on a machine which has fcp7, but I cannot find anything on doing the reverse...

Simply put FCP X (and Motion 5 and Compressor 4 if you have them) in a folder named exactly Final Cut Pro X and put the folder in your Applications folder.
Then install FCP 7 as normal.
For some reason that I don't understand it is also suggested that after installing FCS 3 you open Motion 4 before opening any other app and then quit it.
Message was edited by: Ian R. Brown

Similar Messages

Can't burn blank CD after installing CD that came with ipod nano

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday. There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new. When the phone resets and goes through the setup process, I was given the option to turn on location services. I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me. It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

I can not open different sites after installing itunes. Why?

I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Why can't I open iTunes after installing Lion?

Why can't I open itunes after installing Lion?

I do not know what to tell you. iTunes is working fine on my system. What don't you give a little information about your system and when this problem began on your mac.

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Can't burn blank CD after installing ipod software

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

After installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

after installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

Could you please be clearer, Could you please be clearer, could you please be clearer?
You cannot connect at a wi-fi hotspot, or on a secure network? Do you show any signal strength? Do you show any available networks?

Macbook can't activate the camera after install the message beta.

Macbook can't activate the camera after install the message beta. I'd tried to uninstall the message beta, macbook still can't activate the rear camera in iChat. But the camera still can work in Skype or face time. Why?

Did you use the bad computer to post this message?
Where did you get the Flash program from?
Are all programs giving you problems, or only some? What ones?
'''[http://support.microsoft.com/fixit/ Microsoft Fix it Solution Center: troubleshooting software issues]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can no longer send mail after installing Yosemite

can no longer send mail after installing Yosemite

Hi nwpmike,
When I uncheck "SSL" it's working well, but it's not very secure. When I leave SSL, I got in "Connection Doctor" the message "Trying to log in to this SMTP account failed. Verify that the username and password are correct.", only for the SMTP. For the IMAP, the status in Green. It's also working well on the iPhone 6 with ios8 and other mac with OS X 10.9 and previous versions.
The only thing that can be involved is that the certificat used by my mail provider is expired.
With connection docteur, there is a button "Show Details". Here is the conversation when connecting to the smtp.
READ Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-STARTTLS
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
STARTTLS
WROTE Oct 18 23:33:53.363 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
STARTTLS
WROTE Oct 18 23:33:53.364 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
STARTTLS
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
220 ready for tls
READ Oct 18 23:33:53.432 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
220 ready for tls
READ Oct 18 23:33:53.433 [kCFStreamSocketSecurityLevelNone] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
220 ready for tls
WROTE Oct 18 23:33:53.642 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
EHLO [10.0.0.108]
READ Oct 18 23:33:53.698 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.699 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x600000ab43a0 -- thread:0x6080032654c0
QUIT
WROTE Oct 18 23:33:53.777 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
EHLO [10.0.0.108]
WROTE Oct 18 23:33:53.778 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
EHLO [10.0.0.108]
READ Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.838 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6000014a58e0 -- thread:0x600001e6fbc0
QUIT
READ Oct 18 23:33:53.842 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
250-smtp.planet-service.fr
250-AUTH LOGIN CRAM-MD5 PLAIN
250-AUTH=LOGIN CRAM-MD5 PLAIN
250-PIPELINING
250 8BITMIME
WROTE Oct 18 23:33:53.843 [kCFStreamSocketSecurityLevelTLSv1_0] -- host:smtp.planet-service.fr -- port:587 -- socket:0x6080010b1400 -- thread:0x600003479b00
QUIT

I can't shut down mail after installing maverick

i can't shut down mail after installing maverick. mail won't let me restart orshut down because i can't get mail to close.

Command + Option + Esc will force quit any app.
Or click Force Quit from your Apple  drop down menu.
You can also force quit apps using Activity Monitor located in HD > Applications > Utilities

How to install iWork after installing the iOS7

How to install iWork after installing the iOS7.

Oh, but it is since you have already erase the volume. What more do you wish to do? If you want to do an online Internet Recovery and your computer is able to do so, then do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Install FCP7 after FCPx

Does anyone know if there are issues re installing Final Cut Pro 7 and the rest of studio on a clean Snow Leopard intal where Final Cut Pro X is already installed?
My current set up (new machine) has issues with FCPX but on another partition with just the OS and FCPX it works fine. I was intending to remove the existing partition so the clean install remains, migrate personal info and docs plus programs from an external carbon copy of my existing set up.
If I remove both versions of Final Cut plus the rest of studio and the new Motion and Compressor from the carbon copy partition then migrate apps I hope re installing studio will fix all my issues. Has anyone tried a partial migration with success?

Great news, it is all fixed. I used an application called FCS remover to uninstall FCS studio 3 and FCP X as well as Motion and Compressor. Re installed Studio from the disks, down loaded the updates so then Studio 3 was working fine.
Next tried to download the three new apps but my system (App store) still had them as installed. After discussion with AppleCare created a new user and downloaded the three apps then changed back to my normal account and everything is working perfectly.

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Can I re-install fcp7 AFTER installing fcpx

Similar Messages

Maybe you are looking for