Can I really Install SAP ECC 6.0 SR3

Hello Experts,
I have a question, I am an amateur and need your expert advice regarding installation of SAP R3 on my laptop. My question is that If I install SAP on my laptop would I be able to practice it anywhere even without the Internet? I am new in SAP FICO and willing to give all my time to learn it. I have 12 points in my account(not a lot I know, but that's all I have), I'll give all these points to someone who can take this time out and explain me how do I do this.
I have Windows 7
Ram 4 GB
HDD 320 GB
Apart from the points, I would really appreciate your help on this.
Peace,
Nick

Well don't worry you don't have to sacrifice your pionts
Hope you are aware that you can download trail versions of various SAP Netweaver releases here [Downloads|http://www.sdn.sap.com/irj/scn/nw-downloads].
Am not really sure how helpful they could be for practicing FICO, as these trail version may not contain most of the standard SAP transactions.
Another option is to install a IDES, which is definitely possible for the configuration you have in your laptop. You may have to look around in your area where you can get it installed . (Should be easy if you are in India).
Vikranth

Similar Messages

Operating system VERSION incompatability while installing SAP ECC 6.0 SR3

<h3>what is the dump of M.S. SQL SERVER required for installing SAP ECC 6.0 SR3 ABAP system on WINDOWS SERVER 2008 R2 ENTERPRIZE 6.1 VERSION.</h3>
we installed the MS sql version: 10.50.1702 (dump number 51039339) on our Operating system version was Windows Server 2008 R2 enterprise (version 6.1) and while we are trying to install sap using SAP INST we got one high priority prerequisites analysis message saying
<h3> MESAGE "The following operating system versions is supported: windows server 2003(i.e version 5.2) and Windows server 2008(ie 6.0). current oprating version: version 6.1 service pack 0.0"
Can any one help me what is the problem, Is it the operating system or with the MS SQL server and please tell me what we should do in order to rectify this issue</h3>
Please also tell me how to check COMPATABILITY between OS, DATABASE and SAP. we have gone through PAM but not able to find. Can any one help me.

mahesh.boby63 wrote:
> Why we sholud go for modified kernel DVD procedure on windows server operaating system ?
It's not about 'windows' server, but for 'windows 2008 R2' server.
Kernel files included in the 'Installation Media' are by default the old/low patch level not released fully compatible with 'new platforms' like 2008 R2 - which may cause some problems 'during' installation as well.
So, using modified kernel DVD you get two advantages -
1. You are able to avoid 'those' problems during installation.
2. You don't have to go for an explicit kernel upgrade just after the installation.
Thanks

Add-On in installed SAP ECC 6.0 SR3

Hi All,
I have installed ECC 6.0 SR3 with ABAP+JAVA (MI usage type) on Window 2K3 64bit R2. Now i want to add DI add-on in installed SAP system. How can i add this add-on in SAP system.
regards,
majamil

Hi Markus,
When i run SAPInst then there is no option of additional usage type in SAP NetWeaver 7.0 Support Release 3.
while SP level is 14 in my system. there are four option.
SAP NetWeaver 7.0 Support Release 3.
1. SAP Systems
2. Standalone Engines
3. Optional Standalone Units
4. Software Life-Cycle Options
   4.1 Additional Preparation Options
           .Operating System Users and Groups
           .Prerequisites Check
regards,

Error While Installing SAP ECC 6.0 on Oracle DB at 19th Step Import ABAP

Hey all,
I am NEw to this Forum..And this is My First Post in this Forum...
When I Was Installing SAP Ecc 6.0 on My PC.. I got An Error Message at 19th Step at Monitoring the Job 18...The Issue is Below...
INFO 2013-08-30 06:12:14
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.4.xml'.
INFO 2013-08-30 06:12:14
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.5.xml'.
INFO 2013-08-30 06:12:16
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2013-08-30 06:12:28
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.3.xml'.
INFO 2013-08-30 06:12:28
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2013-08-30 06:12:33
Switched to user: ramadm.
INFO 2013-08-30 06:12:33
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2013-08-30 06:12:33
Switched to user: ramadm.
INFO 2013-08-30 06:12:33
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2013-08-30 06:12:33
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC 6.0\ecc6\DB1\EXP1;E:\ECC 6.0\ecc6\DB2\EXP2;E:\ECC 6.0\ecc6\DB3\EXP3;E:\ECC 6.0\ecc6\DB4\EXP4;E:\ECC 6.0\ecc6\DB5\EXP5;E:\ECC 6.0\ecc6\DB6\EXP6;E:\ECC 6.0\ecc6\DB6\EXP7;E:\ECC 6.0\ecc6\DB6\EXP8;E:\ECC 6.0\ecc6\DB6\EXP9;E:\ECC 6.0\ecc6\DB6\EXP10;E:\ECC 6.0\ecc6\DB6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe D:\usr\sap\RAM\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2013-08-30 06:17:03
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC 6.0\ecc6\DB1\EXP1;E:\ECC 6.0\ecc6\DB2\EXP2;E:\ECC 6.0\ecc6\DB3\EXP3;E:\ECC 6.0\ecc6\DB4\EXP4;E:\ECC 6.0\ecc6\DB5\EXP5;E:\ECC 6.0\ecc6\DB6\EXP6;E:\ECC 6.0\ecc6\DB6\EXP7;E:\ECC 6.0\ecc6\DB6\EXP8;E:\ECC 6.0\ecc6\DB6\EXP9;E:\ECC 6.0\ecc6\DB6\EXP10;E:\ECC 6.0\ecc6\DB6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe D:\usr\sap\RAM\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
ERROR 2013-08-30 06:17:03
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2013-08-30 06:17:03
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
This info i found in the log file generated at sapint.log...So I request you all Plz Help me Regard this..and Thanx in Advance..
Kumar

Kumar,
As suggested in this log, please try to see the logs import_monitor.java.log, import_monitor.log
However above log files might not suggest something specific but as we can see the latest error was w.r.t the package SAPAPPL2.
Please try to see SAPAPPL2.log and we should get something specific there as why the loading job failed for this package.
Thanks

Hardware Requirements to install SAP ECC 5.0/6.0

Hey Gurus,
Could you please tell me that what is the best hardware to go for to install SAP ECC 5.0/6.0 so that we can afford the future changes also without buying the new hardwares.
Thanks 'n Regards,
Ashwani

Dear Ashwani,
It will solely depend on the number of concurrent users, the implemented Modules (project scope), the data volume, Transaction volume etc.
have you tried SAP Quicksizer http://service.sap.com/quicksizer ?
This will give you your requirements in SAPS (CPU power) and RAM. Then you can check that with your H/W vendor and they wil suggest you suitable configuration.
Cheers !!
Satya.
PS: points always encourage me to reply....Thx !

Installing SAP ECC 6.0 in Windows Vista

Hi experts,
Can anyone say me if i can install SAP ECC 6 in Windows Vista other than Windows 2003/2008.
Thanks

Hi,
Vista its not possible earlier it was possible to install in xp but now in vista not possible.You can install vmware workstation and then the windows 2003 in that and then install sap in it.Dual boot means you will have lot of restrictions using windows 2003 if you install vmware then you can use vista same time ...

Need to install SAP ECC 6.0 & NW-04s Components

Hi Experts,
I am new to SAP.
I have to install SAP ECC 6.0 ,NW-04s(PI,BI,MI,.......) , so I need to know whether SAP Software will support the below illustrated Hardware or not.
1. Intel Processor Core-2-Duo 6650 2.66 Ghz
2. Mother Board Intel DG33FBC.
3.RAM 4 GB.
I appreciate your answers,and also points will be rewarded.
regards
Ken George

Hi Ken,
From my experience, I did tried to install ECC6 on a server with RAM 2GB but without Java stack. As for NW04s, if you want to install one nw04s technology it is sufficient for the current hardware specification. If you want to install all those software because of you want to learn, could you advice me which path that you want to go?
Thanks and Regards

Update license at first time when installed SAP ECC 5

Hi Expert
How to update license at first time when installed SAP ECC 5 Unicode System, license expiration period only one month.
Regds.
Rahul

Hello,
SAPKIPYJ63 is PI_BASIS 2005_1_640: patch 0003.
Apparently you have included this support package in the upgrade. But have you installed or upgrade the component PI_BASIS to 2005_1_640 during the IS_SELECT phase? This is required for support package SAPKIPYJ63.
Regards,
Joe

SAP ECC 6.0 SR3 Cluster failover not working in AIX with DB2 UDB V9.1 FP6

Hi Gurus,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP6 in AIX cluster environment.
After installation we are doing the cluster fail test.
Node A
Application Server
Mount Points:
/sapmnt/<SID>
/usr/sap/<SID>
/usr/sap/trans
Node B
Database Server
Mount Points:
/db2//<SID>
The procedure followed to do the cluster failover:
We have down the cluster on Node A and all the resources of the Node A has been moved to Node B.
On Node B when we issued a command to start the SAP. It says u201Cno start profiles foundu201D
WE have down the cluster on Node B and moved the Resource from Node B to Node A . There the db2 User IDu2019s are not available. We have crated the user Idu2019s manually on Node A. however it did not work.
Please suggest the procedure to start the sap in cluster failover.
Best Regards
Sija

Hi Sija,
Can i have detailed scenario in your cluster configuration.
Means you are saying that going to start cluster package manually, if it is right please make sure that you had the same copy of start, instance profiles of NodeA to Node B. Means you need to maintain two startup, two instance profiles for both nodes. In a normal situation it will picik the profile of node A to start databse from A node. But in a failover situation it will not pick node A profile to start, it should pick Node B s profiles.
Just make a copy from node A and change the profile name accordingly to Node b. Then try to restart.
Regards
Nick Loy

SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F

Dear Expertise,
We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
We have installation following instances on nodes 1 and 2.
Node 1
DB2 database software
Central service instance for ABAP Installation on Shared drive G:
First MCSC node to create a cluster group u201Cpdssapgrpu201D
Database group u201Cpgsdbgrpu201D(Shared Drive)
Enqueue replication service
CI (central instance)(local Drive)
Node 2
DB2 database software
Additional cluster node
Enqueue replication service
DI(dialog instance)(local Drive)
I can login into the system using both CI and DI.
if my SAP Cluster group is moved from one node to another i can still login into the system
But when my DB2 group is moved from node A to node B my SAP services are getting closed
and i am getting the message database not found
so please Guide me as soon as possible Friends.
Thanks and Regards,
Ravindra
Edited by: Ravindra Bade on Mar 6, 2009 10:22 AM

Hi Ravidra
Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
THanks in advance

Java sdk 1.4.2 Windows 2008 SAP ECC 6.0 SR3

Hello,
I want to install SAP ECC 6.0 SR3on server which is running windows 2008.
The operation system is 64 bit version with a Xeon processor.
I folow the following path to Download a j2sdk version http://java.sun.com/j2se/1.4.2/SAP/download.html.
Downloaded j2se v 1.4.2_17-x64 SDK (j2sdk-1.4.2-17-windows-amd64.exe).
When I installed This version of java. It seems to be OK, but after setting the envirnment variabeles path and Java_home, the java version is not working.
When I try to run SAPinst this error prompt u201CThe SAPinst could not started because a java runtime Environment (JRE) could not be found.
Please help me
Regards,
A3

Hi Bas,
What error you are getting?
Java version not working meand???????
Just install java, set JAVA_HOME, PATH variables and restart your server/system.
Then check and send us the result.
Regards

Can I retrofit from SAP ECC to SAP R/3

My understanding was yes. However how do I set this up in SMSY? My system is coming in as an R/3 Enterprise system. However when I select the system role for post processing only my SAP ECC systems show up in the drop-down.
How do I include my SAP R/3 system:clients in the SAP ECC drop down?

Hmmm, it can be done both the ways. What system you need to keep it eventually?.
Form your point, Your ECC system is defined right?.
If thats that case, goto Txn SMSY-><your SID>-> Header Data-> Installed prodiuct version->from the free selections select SAP R/3->and the related compoent-(I Guess ECC server). This actually creates by itself an duplicate in R/3. but you have to un-check the leading product role box. (You can have the desired system- by cleaning up the inconsistencies).
The vice versa in the other case.
Does this sound OK. I know, its bit confusing all over, Please try it for a test/Sandbox SID first, to get that on place.
Thanks,
Jagan

How to INSTALL SAP ECC 6 EHP 4 IN SUSE 11

HELLO EXPERTS
INITIALLY WE HAVE SAP ECC 6 EHP 4 FOR SUSE 10 SP2. ALL THING ARE GOING WELL.
BUT NOW WE ARE MOVING TOWARD TO UPGRADE HARDWARE AS WELL AS OPERATING SYSTEM.
SO WE ARE GOING TO UPGRADE EXISTING SAP ECC6 EHP4 INSTALLATION IN SUSE 11.
SUSE 11 HAVE SAPCONF FILE AND SUSE 10 HAVE SAPINIT FILE.
WHEN I AM TRYING TO INSTALL SAP ECC6 EHP4 IN SUSE 11 SP2, THEN I GOT THE ERROR .
PATTERN: SAP-SERVER-11- 38.39.11X 86-64 REQUIRE SAPCONF BUT THIS REQUIREMENT CAN NOT BE PROVIDED.
PLEASE HELP ME IN THIS REGARDS

thank you for you reply.
I also read this document but not very helpful to resolve the issue.

Min Configuration to Install SAP ECC

Hi All,
Can any one help me out on this. I am planing to buy a laptop which support SAP ECC..
1. harddisk capacity
2. RAM
3. Processor speed.
and other ?

hope this helps
Hardware Requirements
Here is the required / recommended specification to install SAP R/3 system.
CPU : Intel Pentium III u2013 500Mhz
RAM : 256MB (minimum) or 512MB (recommended) "more the faster..
HDD : 30GB
NIC : Intel compatible Ethernet card
CDROM : required for CD installation
Software Requirements
Here is the required software to install SAP R/3 system.
Windows NT Server 4.0
Windows NT Service Pack 6.0
Internet Explorer 5
Microsoft SQL Server 7.0
SAP R/3 Kernel CD
Active Directory Service Interface (ADSI)
Dynamic Link Libraries (DLLs)
Microsoft Management Console (MMC)
SAP R/3 System
Export CDs (3 CDs)
Report Data CD
SAP GUI
http://www.freebsd.org/doc/en/books/handbook/sapr3.html
http://www.susanto.id.au/papers/SAPInstall.asp

Download and install SAP ECC IDES Version

Hi,
I want to practice with SAP at customizing and programming level, so I want to install SAP in my computer.
How could I get the installation CDs of an ECC IDES Version?
Thanks.

This error may occur if you have a broken download. Please try to re-download and install the trial.

Can I really Install SAP ECC 6.0 SR3

Similar Messages

Maybe you are looking for