Can I reconfigure how my hp all-in-one is attached to an Airport Express?

When my hp Officejet 6310 all-in-one is connected by USB cable to an Airport Express, which is connected wirelessly to my Airport Extreme, is loses scanning and other functions (printing works). The Airport Express instructions say to connect printers with USB. But can I use the Ethernet connection between the printer and Airport express? If so, do I need to change my Airport Express settings?

If I reconfigure using WDS will I notice the print speed being half as fast due to using half the bandwidth?
Probably not. The data transfer for a print job probably doesn't take a lot of bandwidth.
Will it effect the speed (or anything else) of the other computers on the network?
Yes it affects the bandwidth of the entire wireless network. So anything connected wirelessly will feel the pinch.
Also, I already have a WDS on this network with a different, separate AX (b,g&n) extending the network's reach to other parts of the house. Does that effect what I can / should do?
Ouch! Each WDS link cuts the available bandwidth in half. So with 2 WDS links you will only have one quarter (1/2*1/2) the available bandwidth.

Similar Messages

Can i set the ipad to print to an Hp all in one that is connected to Airport express

Can i set the Ipad to print to an HP All-in-one Printer that is connected to airport express?

Hey Eugene!
Here is the website about AirPrint, if you scroll down it will say in details if your model is compatible with AirPrint.
http://www.apple.com/ipad/features/airprint.html

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

Ok so I have OS X Lion now and this is what I get: "You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

ok so I have OS X Lion now and this is what I get:
"You can't open the application Lexmark All In One Center because PowerPC applications are no longer supported."

look for the latest drivers on the maker's website.
check it in your list. this is a lexmark issue not a lion issue.
http://support.lexmark.com/index?page=content&id=OS22&locale=EN&userlocale=EN_US

HT1338 how to install all in one cannon printer

how to install all in one cannon printer

I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

Are there any updates so i can use my HP Photosmart C4780 All in One Printer wirelessly?

just wondering..are there any updates for the iMac with OS X (10.8.2) so I can use my HP Photosmart C4780 All in One (Print,Scan,Copy)?

Hi,
An HP Full Feature Software is not available for Mountain Lion, therefore the Wireless configuration is tricky and cannot be done through the software.
To connect the printer to your wireless network you will need to create a temporary wireless ad hoc connection, then the wireless connection to your router can be configured via the EWS page:
Step one: Restore the printer's network default settings
Touch the ATM button ( ) next to Wireless / Scan .
Touch the ATM button ( ) next to Wireless Menu .
Touch the ATM button ( ) next to Wireless Settings .
Use the up and down ATM buttons ( ) to select Restore Network Defaults , and then press OK .
Touch the ATM button ( ) next to Yes to confirm your selection.
Step two: Networkly connect the Mac to the printer by creating a temporary ad-hoc connection
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select the printer's SSID, it should be listed as HPSETUP or should contain HP or C4700 within its name.
Click Connect
Allow two-three minutes to fully establish the network connection.
Step three: Connect the printer to your router via the EWS page
Open Safari.
Click the Bookmarks icon ()
Click Bonjour.
Double click the printer name, the EWS page appears.
Open the Networking tab.
From the left pane select Wireless.
Click the Start Wizard button and follow the steps to connect the printer to your router.
Step four: Reconnect the Mac to your router
From the Mac, click the Wi-Fi icon.
Click Join other network.
Click Show Networks.
Select your router SSID.
Click Connect
Allow two-three minutes to fully establish the network connection.
Now the printer should be connected to your network.
Open Print & Scan, click the Plus sign and add the printer listed as Bonjour.
btw John Galt - I this it should be spelled as OS X, please correct me if i'm wrong.. ;-)
Hope that helps,
Shlomi

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How do I print from my I Pad 2 using Airport Express

How do I print from my I pad 2 using airport express.

At this time you can't, not if you mean a printer connected via USB to the Airport unless there's been an app or workaround released that I haven't seen, or unless the printer is one of the few wireless printers that support AirPrint or for which the manufacturer has released their own app. At this time only HP has come out with printers that support AirPrint, which allows an iOS device to natively print directly to a wireless printer:
http://support.apple.com/kb/HT4356
It's possible other printer manufacturers may provide updates to their printers to make them AirPrint capable. It's also possible that eventually Apple will support printers connected to a computer or Time Capsule. HP also has an app that allows printing to some of their other wireless printers, as if memory serves does Brother.
If you don't have an HP printer or a another printer with an app available, then for now, you would have to connect the printer to your computer, then search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing. If you have a Mac, try Printopia.
Regards.

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

Can I connect a Vonage / Basic Talk pjone to the USB port on Airport Express that is connected to a cable modem?

Can I connect a Vonage / Basic Talk pjone to the USB port on Airport Express that is connected to a cable modem?

No: Uses for the USB port of Time Capsule, AirPort Extreme, AirPort Express

How can I use my HP 1315 All-in-One scan features on my computer?

I am able to use the printing function from my computer but am unable to use the scanning feature on my printer. I have downloaded the Apple stuff and have searched HP (many features, including a diagnostic test, are blocked by Apple!!) and can't figure out how to use my scanner on the printer. The suggestions from Apple (web help) are not helpful in the least. I have a HP 1315 All-in-One (1310 Series) and the Mac installation disk will not work on my MacBook. Any suggestions will be helpfull. In advance, thank you!!

Set System Preferences > Security : Gatekeeper: Anywhere
Visit HP site, find your necessary software, download and install.
You know where not to download potentially malicious software from right?
How to download and install programs
The install disk is too old, you need the newer software version direct from HP and to apply the update.
http://www8.hp.com/us/en/support-drivers.html
Click Driver and proceed....

How can I scan with HP 5600 all in one?

Hi! I have an HP 5600 all in one. I recently switched to an iMac Leopard. The printer driver does not have any scanning support. Is there any other driver available to get this support? Or will I have to get a compatible printer to be able to use scanning options?
Thanks.

Have you checked the HP site, there is software for the 5600 series of all-in-one printer. Its 188Mb download that is titled "Full feature software and drivers for Mac OS X 10.3-10.5".
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&produc t=441123&lang=en
regards

How to connect All in One desk top with TV

I purchased my HP Pavillion 23 A10 All in one desk top PC more than a year ago.Few days ago, some marks appeared on the screen whilst I was using my computer and look like that some one smashed the screen with a stone. I consulted with one of my friend and in his opinion, the screen was damaged due to the impact of some hard thing, though I don't agree with him as it happened when I was using the computer all of sudden.
Can any one help me to sort out this problem?
Also, I want to connect it with the TV to make sure that it's screen problem, but there is no VGA or any other sort of arrangement on this All in one computer. So, could you please help me how to do it as well?
My computer is HP Pavillion 23 A10 and the model is 23-b010 ea and it's very difficult to use the controls as the problem is on the right side of the screen with horizontal lines on the whole screen.

Hi,
Nearly all AIO machines do not have monitor out ports. Many have HDMI in ports. My suggestion: buy an USB video card and you can connect to your TV such as the following cheap version:
http://www.iogear.com/product/GUC2015V/
a bit more with HDMI:
http://www.iogear.com/product/GUC3025HW6/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I reconfigure how my hp all-in-one is attached to an Airport Express?

Similar Messages

Maybe you are looking for