Can I record a voiceover narration for keynote ios

I want to record a voiceover narration for keynote ios or transfer my existing presentation with voice from keynote 09? Is there a easy way to do this?
Thanks

I just saw correct answer, so I clicked on it for hang time's answer. I don't know anything about Internet forums, or anything technical, so, I'm sorry about the points! Thanks again, hangtime, you really made my summer!!!
doninlaramie

Similar Messages

How can I record a drum part for longer than 1 minute?

How can I record a drum part for the length of a normal song, say 3 or 4 minutes?

I just saw correct answer, so I clicked on it for hang time's answer. I don't know anything about Internet forums, or anything technical, so, I'm sorry about the points! Thanks again, hangtime, you really made my summer!!!
doninlaramie

Can we record script in OS for peoplesoft

Can we record script in OS for peoplesoft not for load testing but for functional testing

Peoplesoft works in browsers, so you can use web functional testing for Peoplesoft too
Cheers,
Deepu M
[email protected]

Recording Narration for Keynote?

According to the KN User Manual, each KN slide can be narrated with an audio file so that the audio plays for that one slide only and stops when that slide leaves the screen. But the user manual does not say how to record this narration. Is there a way to record narration, one slide at a time, using a UBS mic, directly into Keynote as I'm building the presentation?
Right now.... my procedure is to export the KN, no audio, presentation as a QT movie: DV NTSC Low Quality compression, at 8fps. (Any other frame rate and the QT movie is not the same length as the Keynote Presentation. I made a one minute test of this and only changed the frame rate settings. 8fps gave me a 1:00 QT movie, but 29.97fps gave me :58. Over time, this two second loss can really add up!)
I then imported that low video quality QT into Final Cut and used the voice over tool and a USB mic to record narration as each slide rolled by. I then exported just the audio track, since the video was just there as a low quality guide, and I then put that audio track in iTunes.
I then went back to the original high quality Keynote presentation and dropped the narration track into the first slide with the media option. For at least the one minute test, everything was in sync through ten different slides.
Is there an easier way for me to get narration into a Keynote presentation?
Thanks, Steve

Thanks Richard,
I did what you suggested, but instead of using QT pro, I used SoundStudio, which will also allow me to record through a USB mic. I then added an audio file to each individual slide. I did this for a ten slide test, but for my wife's 100 slide presentation I can see how that would take up a lot of time!
Still, your system of audio files (builds) added to each slide worked fine although I'm still testing out the refinements. It seems that once the audio is on the slide, the preference is towards the audio. By that I mean if you have a 12 second slide and you add 14 seconds of audio then the slide will stay on for at least 14 seconds before it makes a transition. Even though you may have set the slide to transition after 12 seconds. The audio won't get cut off. The other thing I see is that after the audio stops playing, there's too much of a delay before the transition kicks in.
I'll have to look into that.
The other route I took was making a Keynote presentation, exporting it as a low quality QT self playing movie, importing that movie into Final Cut Express, adding voiceover to the total running time of the presentation, and then exporting just the audio track as an aiff auido file. I then took that aiff audio file, went back to the high quality Keynote and dropped that track into the audio well to sync up with the first slide. All worked well with everything in sync, in Keynote. I then exported both audio and video as a QT movie and the audio fell out of sync. After 60 seconds the audio ended up 2 seconds longer than the video. Over time this could kill the project.
So..... if I have to do a lot of narration on slides I might buy QT Pro and drop the audio in as build objects for each slide. Hopefully I can work the other timing bugs out.
Any idea what went wrong with the sync when I exported a QT movie out of Keynote?
Steve

TS3694 how can i fix a 3014 error for the iOS 6 update

I tried to update my iPhone 4 to iOS 6, and when it was restarting, it gave me the option to restore it. When i click restore, it comes up with an message about error 3014. How can this be resolved? Because my phone is now frozen in the restore stage.

thy this article http://lastplaceonthe.net/fix-itunes-error-3014-upgrading-iphone-firmware/
Ryan

How do I sync apps from the same iTunes account to an iPhone 3G and an iPhone 4S and keep correct version for each iOS?

I have an old 3G as well as a 4S. Initially I set up a separate iTunes account for the 4S as I was worried I'd lose my old apps for 3G (as older, compatible versions aren't kept in the iTunes store so once they're gone, they're gone...). 3G is set up to sync with iTunes, 4S is inly syncing mail and conatcts through Exchange but hasn't been synced with an iTunes library for the reason above.
Is there a way to sync both phones off the same iTunes account, so I can set up each phone with some music, as well as apps, without iOS 5 versions overwriting the exisitng apps for the 3G?
To complicate things further, I don't want to sync photos, contacts, messages, etc. I just want to avoid having to duplicate all my music and pay for all the apps all over again. Suggestions?
Cheers

Hi gail,
Thanks for the quick reply! The music part makes sense, good to know I don't have to duplicate the lot. The big question stillr emains as to whether iTunes can cope with two different iPhones, running different versions of the iOS, and therefore different app versions.
Currently all the apps in iTunes are years old, and many haven't updated in months (years?) because the 3G is running iOS 4.2.1 (and can't be upgraded). Many of these have since been updated in the iTunes store (for the various incarnations of iPhone since) and the old versions that my 3G requires have been replaced.
I'm worried that syncing the 4S running iOS 5, and running the most recent updates for same apps, will cause iTunes to overwrite the old 3G compatible ones when I sync. Unless iTunes is smart enough to know which version of the app is for which OS, without updating the legacy version when I update the apps on the 4S?
You guys shouldn't face that problem, as iPad and iPhone apps don't replace each other (I believe? Not sure about this) as new updates are released for each app, you'd have a copy for each device (for example Evernote for iPad, and Evernote for iPhone). I can't figure out if iTunes can handle keeping separate iPhone versions for Evernote iOS 4.2.1 and Evernote for iOS 5. My gut feeling is no, but I want to amke sure before I lose the legacy versions of each app.
Of course, maybe I'm just paranoid and iTunes is in fact perfectly capable of keeping old and new apps in the same library?
Cheers

Can Keynote 3 record narration for slides (like PowerPoint)?

Does anyone know if it's possible to record narration for selected slides in Keynote 3? Unfortunately, this much-desired feature was lacking in Keynote 2 (it could only play one audio file through the entire presentation). FYI, PowerPoint has this feature already, but it is then limited by an inability to export to Flash or QuickTime... Thanks!

Thanks, nanotechmama! On your lead, I looked up the User's Guide and found this additional clarification:
"Adding Narration and Other Audio
You can add music—a file or playlist from your iTunes music library, or any other sound file—to a Keynote document. You can add sound as a soundtrack for the entire slideshow, or you can add sound to a single slide.
If you add a soundtrack, the music starts playing when the slideshow starts. You can specify whether to play the audio once or repeatedly (or you can turn it off ).
If you add a sound file to an individual slide, the sound plays when the slide appears and stops when you move to the next slide. You could, for example, record narration for each slide as an MP3 file; this technique is especially useful if you plan to export the slideshow as a self-playing QuickTime movie. (For more information, see “PowerPoint” on page 167.)
Note: To make sure that the audio plays on other computers, “Copy audio and movies into document” must be selected in the expanded Save dialog. This option is on by default."
So it looks like it might be possible to add a different narration file to each slide. I've therefore ordered a copy of Keynote 3, and I'll confirm in a week or so (once I receive it) whether this is indeed so.

When using the record function for narration in Keynote 09 version 5.1.1., the recording continually gets off sync with the slides even if nothing has been altered on any of the slides.

I am trying to record narration for my slideshow in Keynote 09 version 5.1.1. I put the transitions on automatic and hit the record button, then read the slides as they advanced. The program allows me to record my voice, however, when I play the slideshow back the recording continually becomes more off sync with the slides with each play. Is there a way to fix this?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

When I try to record narration in keynote on my imac I cannot escape out of this screen. I have to force quit out of keynote. This makes it impossible for me to use.

When I try to record narration in keynote on my imac I cannot escape out of this screen. I have to force quit out of keynote. This makes it impossible for me to use.

Click the record button to stop recording.

How can I record narration with no video or beyond the end of my video in iMovie?

I have a question about recording narration in iMovie.
I wrote a script to read as the narration for a movie I'm making. My thought was I could record the narration first, then add video to match the spoken words.
I've done this before in Sony Vegas on my PC and it worked out well, better than trying to speak to what was going on in the video after I record the video.
Unfortunately, if I try to record narration in iMovie without any video being there yet, it won't record. It appears I need to put a video clip on the timeline first.
If I put a short clip in and try to record narration beyond the end of it, iMovie quits recording at the end of the video clip.
So I went to quicktime and recorded my narration there and have 10 audio files (since I just don't seem to be able to read this whole script without making mistakes).
I then tried to add all 10 to my movie and I think it made me add a video clip first, but after I did, iMovie overlayed all 10 audio files on top of each other.
If I try to drag them over one at a time, I still can't get them to go sequentially unless I add more video to my movie.
There must be a way to add audio files or create narration without having to create a video file longer than your audio first. Isn't there?
I just can't seem to find a way to get the audio files layed out one after another without more video. Very frustrating.
At this point, I really want to know how to add audio files beyond the end of my video since I have them all recorded.
But I'd also like to know how to record narration beyond the end of the video too for future projects.
Thanks!
Brad

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

Best Way to Record Narration for Slides

I'm new to Keynote.
1. I have created a 20 slide presentation.
2. I have recorded a 5-minute narration for the presentation in Garage Band.
What is my best option to put the two elements (slide show and audio) together so they sync perfectly? I'd like the end result to be a flash file that I can upload to YouTube and embed on my website.
Here are a couple possible work flows I thought may work. Am I on the right path? What would you suggest?
A. Cut my audio into 20 files and add those files to the individual Keynote pages. Then somehow turn the Keynote with the 20 audio files into a flash file.
B. Wait until Camtasia for Mac comes out next week. Then, add my audio track, import the Keynote slides (if possible), and tweak the timing in Camtasia so that the slide show and narration match up.
What do you think? Would either of these work? Am I forgetting some other obvious solution that would be easier? Thanks.

I have no experience with Flash or Camtasia, but I have used iMovie to create QuickTime slideshows that are suitable for most websites. This may be another option for you.
It's easy in iMovie to match up narration or music, or both, with individual slides, apply various effects and transitions, and export the results in formats for DVDs or websites. I have not tried importing an entire Keynote presentation into iMovie and do not know if that's possible. Keynote offers title and transition features that iMovie lacks; so the choices you make really depend on your end goals, which will determine which tools are best to get there.

Can i add a recorded imovie voiceover to idvd menu

I recorded a voiceover in imovie and want to add it into my idvd theme menu. Can I do that?

Yes, this can be achieved by exporting just the audio from iMovie (but this will export ALL the audio, not just the voiceover). You can also copy the voiceover from the project's package contents folder. I'll explain both methods for you.
Export the audio only:
From iMovie's menu select Share > Export using QuickTime
In the panel that opens, for Export choose Sound to AIFF
Give the file a name and save location (say, Desktop)
The exported file can now be used in iDVD (I'll explain how later)
Copy the voiceover:
In Finder, locate your project in the Movies/iMovie Projects folder. On an internal drive, these are in your Home folder. On an extenal drive they are at the top level of the drive.
Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu
The voiceover recording will be listed in the package contents folder, named Voiceover Recording xx.caf (where xx is the number ascribed to the recording)
Copy then Paste the .caf file to your Desktop
I need to open iDVD to refresh my memory on the layout and naming of items, so will post back shortly on how to use the voiceover in an iDVD theme.
John

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

Best way to record narration for 200+ slideshow?

Hi All,
I've got a long narrative to record to a complex slideshow of over 200 slides with transitions.
What are your suggestions?
If it's done in Screenflow- is there a loss of resolution/ quality? Another alternative I thought of was recording the narrative for each slide in Audacity and then attaching it to each slide.
I want to export the whole to Quicktime/ Flash when done.
System: Macbook 2.16GHz running 10.5.3 and iWork08.
Cheers

<<I guess I could time the narration for each bullet point (build) on the slide, and then manually set the build time accordingly.>>
That's about it. Setting an appropriate Delay for automatic Builds is what I had in mind. However, it is important to remember that this often will "slip" slightly during playback - especially if the presentation is designed on one computer and played on another because the playback speed (duration) of all Builds and Transitions is dependent on the processor speed of the playback computer.
It is not a perfect solution, but until Apple fixes all of the various audio deficiencies in Keynote, we will have to live with the various work-arounds that are proposed in this forum.
Good luck.

How can I record multiple signals for a long period of time?

Hi, everyone
I am new at labView I just recentlyl started using it. Right now I am working on this assignment
that I have to display en record six different signals comming up from a DAQ. so basically What I did
for my IV is placing a whileloop. Inside the while loop I set up the DAQ assistant and then I send that
to a split signal function in order to split the signas that are comming from the DAQ ( so those signals
are EMG1,EMG2, blood flow1, blood flow2, blood pressure, and AM stimulation) after I split the signals
I send each individual signals to a waveforme graph, but my problem is that I need to record those individual
signals for a long period of time every second for about 8 hours. so it will be really helpfull if someone can
guide me through this. Thanks
Regards

Hi,
With your while loop, you'd better use low-level VIs to write your data to a file. Please see attached...I've used text file function but if you need ta save a large amount of data, you may need to use binary file functions instead (nearly the same way to perform this whatever you chose text file or binary file function).
Best,
J.
Attachments:
RecordData.vi ‏27 KB

Can I record a voiceover narration for keynote ios

Similar Messages

Maybe you are looking for