Can I record from one computer directly to another?

New to GB and want to play music on a laptop, then record it in GB on the iMac. Can I connect a cable from the laptop's 'out' to the iMac's 'in' port?

My daughter plays YouTube soundtracks of her favourite shows, records them into GB, tweaks them, then makes iMovies with the tracks and found images. Right now, we're recording the YT soundtracks from one computer's speakers using the other computer's built-in mic, so quality is good enough but not pristine. Just looking for a simple solution, not being a big multimedia dad exactly. Do you think an audio cable, with two like connectors would work (if it exists)?

Similar Messages

  • Is there a way I can move movies from one itunes library to another on the same computer?

    Is there a way I can move movies from one itunes library to another on the same computer?

    Locate them in the Windows Explorer, move or copy those files as you would any other, and drag them into the open iTunes window when the second library is loaded. If you're using two iTunes libraries on one user account, you only need to locate the files; otherwise, they need to be put in a shared area.
    (63747)

  • Remove activation from one computer and activate another?

    Can I remove an activation from one computer and activate another computer?

    Hi, your license to NM has either a 3 or 8 computer limit depending on if you got Essentals or Pro.
    If you are at your limit and want to take a computer off the license to make room for a new one, you should contact NM by phone. 
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • HT201320 How can I switch from one email user to another?

    How can I switch from one email account to another?

    You have to select between the two accounts in the mail app.
    Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
    Is that what you want to know? There is no way to simply "toggle" between the two accounts.

  • Transfer Customer Master records from one company code to another company.

    hi ,
        working on a rollout project ,
    needed to transfer Customer Master records from one company code to another company code.
    is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
    thanks in advance.
    rahul
    Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AM

    Hi,
    I think you should ask this question in functional consultant forum.
    Thanks,

  • In InCopy, how can I paste from one InDesign table to another without also copying formatting?

    I'm attempting to paste information from one indesign document to another, but the styles are different. Pasting without formatting not working in a table. When I paste over, it retains the container style from the original table.
    I have "Text Only" selected from my Clipboard Handling preferences, so I'm not sure what else to do. I know I can hit escape to switch to the text selection instead of a container, but this only selects the text from one cell. I'd like to copy over the entire table, instead of copying cell by cell.
    How can I paste a table into another, without copying the formatting?

    Copy/Paste whole cells will always retain formatting.
    What you have to do is: Copy/Paste Without Formatting the text contents of the individual cell.
    You have to do that individually for each cell, if you want to copy over text of a whole table.
    A better approach would be to:
    1. Copy the whole table to Excel (or a different spread sheet application)
    2. Copy again from that
    3. Select one single cell and paste
    In that case "Text Only" should be selected from the Clipboard Handling Preferences.
    Uwe

  • Problem with SMTP from one computer but not another

    I have an iMac connected directly to my network via Ethernet and a MacBook Pro which connects via wireless. I have a program installed on my iMac that sends me alerts via e-mail, and it works just fine. When I try and use Mail, however, on my MBP with the exact same settings and credentials, it fails. To make this even more perplexing, Mail works fine from my office on a different network.
    To work around this, I use Comcast's SMTP server on my laptop, but why would my regular e-mail provider's SMTP work on one machine and not another on the same network? The only difference is one is connected via Ethernet and the other by wireless.
    I use a Time Capsule as my router and wireless access point. Has anyone got an idea about what's causing this?

    Please report the relationship, if any, of the "regular e-mail provider's SMTP" and your ISP? If Comcast is your ISP, they regularly block use of Port 25, but if you have selected Use Default Port in Mail Preferences/Accounts/Account Information for the Outgoing Server, then it may be making the wrong choice to work with Comcast. Regardless of the ISP, for this regular account click on the arrows beside the name of the SMTP, choose Edit Server List, then click on the Advanced Tab that will then be seen and choose Use Custom Port, then enter the proper port directly -- that port is probably Port 587, but that could depend on the advisory of the email provider for using their SMTP.
    Ernie

  • Able to interact with a cRIO remote front panel from one computer but not another

    I have a cRIO application that publishes a remote front panel for monitoring and control of the application. From one PC (Win7 & firefox) I can see, interact and control the cRIO through the published remote front panel. From a second PC, also Win7, I can see and monitor the cRIO's state, but the remote panel that is opened does not allow for any interaction and this is true whether I'm using IE, FF or Chrome as the browser. When either PC is connected to the cRIO, it is via a dedicated Ethernet link and only the cRIO and the one PC are on that network. For this two-device private network, the PC is always at address 192.168.1.1 while the cRIO always uses 192.168.84.199 (port 8000).
    The firewall rules on both PCs are setup to allow all incoming and outgoing programs/ports/protocols to be used between these two IP addresses.
    Both PC's have up-to-date LabVIEW development systems installed on them (which more or less guarantees they have the minimum require LV runtime needed to see and use a remote front panel).
    What might be different on the PC that view but cannot interact with the remote panel?
    Solved!
    Go to Solution.

    Sam_Sharp wrote:
    Right click on the second one and select "take control of this VI".
    As far as I am aware - only one viewer of the remote front panel can control the panel at any time - the rest can only view.
    As I tried to say in my original post, there was only one host physically connected to the private network at any given time (by virtue of the fact that the one Ethernet cable connection to the private network was being moved back & forth between the two hosts) so there was no way both hosts could be trying to control the cRIO at the same time. I even went so far at one point of restarting the cRIO while it was connected to the problem host to see if would render it functional, but it did not.
    But I did not know that it was possible to do what you suggested, much less that there was a right-click context menu associated with a remote panel, so I tried it and it worked!    Thank you!

  • How can I link from one flash document to another with buttons?

    Hi,
    From the question above, you can tell that I'm very new to flash, especially with scripting. Total noob.
    I watched my instructor's videos and I'm still stumped. He didn't explain it very well.
    For starters, I am using Flash CS6, but I clicked on AS1.0 and AS2.0 from the drop down mention in the actionscript window for the script below, since that is what my instructor used.
    What I have now are various pages I've already created in flash that are different pages in my website, including a splash page with an enter button.
    For example, I want the enter button to link to another .swf or .html file when it is clicked. This file will be the main page.
    I tried using this script that my instructor mentioned in the video on the button layer:
    on (release); {
        getURL("page1.swf");
    the "page1.swf" file is already in the same folder in my computer as my splash page and I even imported it to the library of my splash page.
    From my instructor's video demo, that should be apparently all that is needed.
    But I cannot get this to work.
    I tested the file and this is what flash comes up with:
    In the output tab:
    ReferenceError: Error #1065: Variable TCMText is not defined.
    In the compiler errors tab:
    Scene 1, Layer 'Layer 28', Frame 1, Line 1
    1180: Call to a possibly undefined method on.
    Scene 1, Layer 'Layer 28', Frame 1, Line 1
    1120: Access of undefined property release.
    Scene 1, Layer 'Layer 28', Frame 1, Line 2
    1180: Call to a possibly undefined method getURL.
    Any thoughts? My instructor also recommended that I embed the .swf into an .html, but he obviously didn't tell us how to do that!
    Also, why doesn't script assist work with AS3?
    Thank you so much!

    Okay so I changed it to AS1/AS2.
    Now it says this:
    Scene=Scene 1, layer=Layer 28, frame=1, Line 1
    Mouse events are permitted only for button instances
    Scene=Scene 1, layer=Layer 28, frame=1, Line 4
    Syntax error.
    I am very confused.
    Also, since all my other pages are in AS3, is there some way I can use another script in AS3 that accomplishes the same task?
    Can someone please provide me with the correct script to use?
    Thank you so much! I feel that people here are much more responsive than my instructor is! Thank God for this forum!

  • Login to Mail from one computer but not another.

    I'm actually posting this on behalf of a senior Gent. We can login to his account from his main computer but not from his 'new' laptop. I've been helping him set it up (win7).
    Message says wrong password and try again in 15 mins.
    I logged into my account on the laptop ok. Using Chrome. I appreciate info is a bit sparse but just wondered if this rings any bells. Router has been re-set. I'm just of to try it IE, though it shouldn't make any difference. Thanks!

    Have you tried resetting the password. Thentry logging in with the laptop 1st  and check over the webmail settings - I don't use BTs webmail since I thinks its er ... poor (to be polite) but a pwd reset and new login from a new device has been suggested elsewhere here.

  • How do I transfer my ITunes Library from one computer account to another on the same computer?

    I use an outdated Mac OS X version 10.5.8 and since it is outdated, my web browsers like Safari and Google Chrome will no longer use Java or any other software that allows you to go on sites like youtube or any other sites (which is mostly everything) that use Java/Javascript. Anyway, i made another account on the SAME computer and Safari seems to be working fine on that computer account. My question is if I can transfer my WHOLE ENTIRE ITunes Library to my other computer account so I can use my ITunes on that account comfortably, like transfer music and what not. PLEASE ANSWER!!!!!!!!!!!! i have been dealing with this for years and have never seen anyone else with my same problem

    Move it to the /Users/Shared/ folder and then into the new account's home folder.
    (87509)

  • How can I move from one hard rive to another to search for my photos?

    I have many of my photos on an external hardrive. iPhoto will not let me go to that external hardrive to search. It only shows the photos I have on my laptop. What is an easy way to do this?

    Don't know if I would call it "easy" but what you need to do is to create a new iPhoto library on your external drive.
    Hold down the option key when starting iPhoto.  You will get a dialog that will let you create a new library. (on you external drive)
    Now you can add photos to this library as usual.
    To switch between libraries hold down the option key when starting iPhoto and select which library you want.
    If your still confused you may want to post aditional questions on the iPhoto support section.

  • I want to transfer my music from one computer account to another on my laptop. How do I do that without killing my music or my previous library?

    Any help? I'm using a new admin on my laptop and want to sync my phone's music to the new admin account. I have no clue if it will work.

    Welcome to the Apple Community.
    Homesharing gives you the option of seeing only the content in the shared library, that is not already in your own library.

  • Importing iWeb files from one computer to another

    I have created a new website on my laptop and have my other sites on my desktop and want to transfer the site on my laptop to my desktop. I don't see where we can import files from one computer's files to another computer's files. Is there a way to do this?

    Mark:
    You can copy the domain.sites2 file from the User/Library/Application Support/iWeb folder on your laptop to the Desktop of your desktop Mac, rename it to something like "site name.sites2", and put it in the iWeb folder with your other domain.sites2 file.
    If you want to merge the sites in the two domain files into one new domain file you can do so with iWebSites.
    OT

  • Position can move from one organisational unit to another.

    hi,
    position can be moved from one organisational unit  to another
    or a person should move from one organisational unit to another.
    regards,
    shruti

    u have to move the position as the person is holder u have to move the position form one org unti to another
    check PP01 in detailed maintainence
    assign   a position number which u have created and which has assigned to one orgunit 
    and hire an employee and assign that positon number
    now check with that position number and go to PP01  detailed maintianec
    give the position number go to relationship there give ur orgunit  to which u want o move and assign the relationship
    still have dounbts i will send u the doc
    Edited by: Sikindar on Sep 17, 2008 4:01 PM

Maybe you are looking for