Can I record in LE8 just through a Boss DD3?

I am usually set up with a PodXT Live processor unit, an M Audio Fast Track USB Interface, Logic Express and my Ernie Ball guitar, but unfortunately I was unable to bring my POD with me on my overseas trip. I have everything else plus a Boss DD-3 pedal. When I went to play and record in LE, I didn't receive any sound in my headphones, but the guitar cable was reacting (I touched the tip of the cable with my finger and I would get that weird sound telling me that the input was being received)
I can't figure out where the problem is. The pedal, the cable, the interface or maybe even the guitar??
Any advice would be helpful,
Thanks
p.s. I tried all the "basic" stuff like creating a new track, selecting the interface as my I/O and making sure everthing was connected correctly

Check that the audio formats are set to 44100.0 Hz in the Audio MIDI Setup application, which is in the /Applications/Utilities/ folder.
(20230)

Similar Messages

Can I record everything in just one slide?

Hello,
I’m trying to create an 30-second flash animation of
our software, with some textual callouts. Since I’ve got the
Adobe Technical Communication Suite, I figured I’d use
Captivate for the job, but I’m new to it and can’t get
my head around some things. If someone has the time to point me in
the right direction, I’d appreciate it. I have tried checking
the help and rummaging through forums, but still can’t get it
to work the way I want.
I’m using the “Full Motion Recording” mode,
since our software is pretty interactive in real-time and I want to
show that. All I want is to do is record about 30 seconds of me
using our software, and afterwards add text callouts here and
there, before exporting to an .swf file.
Question 1: Captivate automatically chops up my recording
into several “slides”, is there a way to make it put
everything in just one slide? Or set the default time of a slide in
order to get my entire recording in one single slide? The problem
is, if I want to place a callout just between two slides…
well, I can’t do that right? I just want one and the same
timeline for my entire recording.
Question 2: After the recording is done, is there a way to
adjust the speed, or pause, certain segments of the recording? For
example, if I realize that the viewer of my flash video needs a
couple of seconds longer to read a certain callout, I want to
“pause” or “extend” that point in the
timeline for a bit. Can I do that, or do I need to record the
entire thing from the beginning and actually pause myself at the
appropriate time?
I’d be thankful for all advice and suggestions. I
realize I’m new to this, so any nudges in the right direction
would be appreciated!
/Tom

Hey there Tom
From my experience, the only time I need full motion is
during a drag & drop or scrolling type of action when the view
"moves" like a film.
My suggestion is that you plan what you want to do (click
here, then there, then select that button etc.)
Step 2 is to start a new project and select "Demonstration"
as the recording type, spec the size of the recording window if
needed and start recording (You might want to use auto capture
which would automatically record all interactions and key strokes,
but please remember to "manually" capture certain screens using
Print Screen e.g. after a drop down menu has opened.) (Hint 2 -
Rather record too many screens than miss one critical one out)
Step 3 would be to stop recording and edit the individual
slides with captions, animations etc. At this stage, you can
specify exactly how long each screen would display, when your
captions etc appear and for how long they show.
In summary, a decently built demo has a seperate slide for
each change in what the user would see on the screen, with FMR
being used to "tie together" 2 views where a movement action causes
the transition.
Hope this helps
Andrew

Can I record customer interaction captured through Hardphone conn. to SAP CRM?

Hello friends,
I'm currently working on one of the proposals for SAP Contact Center implementation with SAP CRM also supporting Hardphones. Client has this requirement to capture interactions from Hardphone in the form of recordings in CRM system.
I'm aware of BCM softphone having option to record customer interactions both at Client and Server side but the client would like to record hardphone interactions and store in CRM system. How could this be acheived?
Would be of great help if you could share the config documents for the same.
Thanks
Chiroy

Hi Chiroy,
BCM cannot record client interactions without the assistance of a third party application such as Vierent or Nice. Client interactions meaning the performance of the Agent on his or her personal desktop, such as key strokes and open files etc.
What BCM can do is record all voice packets between the client and the agent.
It will do this with users on a Hardphone, in MTD mode, using Convergence or the CDT.
There is no restrictions to recording unless you make them so.
There is no need for supporting documents as this information is covered in several existing SAP guides.
Also, these recordings once created, can notify CRM of the storage location in BCM and attach the path of the recorded file to the Interaction Record. This is all done as part of the CAD from BCM. This is option is available via the OII link in BCM but requires CRM customization to work properly.
It should be noted that this recording feature is only active if you have server side recording, not client side.
I hope that helps.
Thanks,
Marcus

How can I record just the Capitals hockey games?

I just switched from Comcast to Verizon. I am able to record the pregame show and the post game show for the Washington Capitals, but I can't record just the Capitals hockey games. I do not want to record all of the hockey games; I just want to record the Capitals Games. I don't want to have to search through the listings every week to record the games. Can you tell me if there is a way to do this?

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

Hi, we just bought a Macbook air and we can't find the 'reminders' app in the applications or through the spotlight search. Is there a link to download the app? I can't find it online or through the app store. Please help!

Hi, we just bought a Macbook air and we can't find the 'reminders' app in the applications or through the spotlight search. Is there a link to download the app? I can't find it online or through the app store. Please help!

Reminders is automatically installed with 10.8 or above. A new Mac should have 10.9; it's possible that, with a third-party vendor, you have an earlier OS. Check under the Apple menu in the top left and click About This Mac. That will tell you what version of OS X you have.
Matt

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple store

I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

Hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

hi, i can't hear any sounds from my pad when i'm recording video what seems to happen? but it has sounds in songs from downloaded files.i just can't record sounds..

Hey ErikSimon, I kept troubleshooting my problem last night and when I loaded my samples an alternate way, actually the longer way, it worked. I think I have gremlins in the system or something, but I got it working again. I was having the issue when I tried loading the samples via these instructions that were mentioned in SFLogicninja's Youtube video @ 3:07
http://www.youtube.com/user/SFLogicNinja#p/u/8/7YjgKLZ2jpY
They are good instructions, but the Logic gods weren't smiling on me last night. Really weird and frustrating at the same time. Thanks anyways.

Can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in?

can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in or interface?

Alas, poor Logic, I knew him well.
Recording wise, It will be much the same as Garageband but you will need to read manuals as Logic doesn't set things up for you. You must choose input and output devices, create the correct tracks. Logic was designed for professional use so it expects users to be somewhat familiar with recording/editing techniques, in other words, won't hold your hand or be nearly as easy to use.

HT2508 How can I record my voice through my Mac?

How can I record my voice to my Mac?

Use GarageBand.
In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

Pops, latency, distortion. Can't record more than 2 secs. Audio interface?

As near as I can tell, all my software is up to date, I have the latest drivers for my audio interface, and Garageband has basically stopped working.
Firstly, whenever I start Garageband the first time, I get latency that is as much as a second or more. So I have to quit and restart Garageband every time to fix that.
If I leave Garageband running overnight, it completely forgets about my interface, and I'm forced to reboot in order to get any sound at all into Garageband. It sees my audio interface (a Tascam US-122), but I can play away and it won't get any sound at all from it until a reboot.
This means that pretty much every time I want to use Garageband I've first got to reboot the system to convince MacOSX to first listen to my Tascam. Then I've got to start Garageband, then quit and restart to get rid of the latency. This is quite a pain and I've been living with it for some time.
But now, it's gotten worse. Since upgrading everything, now I can only record a few seconds of music, before Garageband stops, creates crackling sounds and popping, and occasionally distorted versions of what I played, but stretched out and terrible sounding, and all between long gaps of dead air. This is pretty useless.
There are some people that believe there is an issue involving Garageband and Airport. And, one time I was able to record part of a track by turning off all effects and turning off my airport card. But this only worked one time.
From reading other posts, it's clear that are at least some others that are having at least some of these same problems.
So, here's what I'd like to know:
1. Has anyone had these problems and figured out a fix?
2. I'd really like to know if anyone is all caught up (10.5.2, latest Garageband, etc...) and is having no problems with Garageband?
3. If you are not having problems, what audio interface are you using?
4. I have a Tascam US-122. If you are also have this audio interface, I'd like to know if Garageband is working for you, or if you're having the same problems I'm having.
In case it's not obvious from the above questions, I'm suspecting that my problem might involve my audio interface and I'm hoping we can gather some info here to help resolve that question.
Thanks in advance for your help.

So, I tried recording into Sound Studio using my TASCAM, and I got some of the same intermittent problems I was having in Garageband. Sometimes there would be a long pause and then I'd hear what I had just played but sounding like it was in slow motion and underwater. This suggested either a systemic Apple problem or a TASCAM problem. Putting my bet on TASCAM, I decided to try a new audio interface.
Anyway, after some net searching, I decided on an Edirol FA-66, so I headed on down to my local Guitar Center to buy one.
Only they don't carry them. Apparently, they stopped carrying Edirol stuff a while ago. The guy asked me what I wanted one for and I told him I was recording my guitar on Garageband. His face lighted up and he said, oh, that's easy, you've got to get an Apogee Duet. Because you're a Mac guy, you can buy one. But, I had seen the price and thought that was too much.
So, I looked all over town, and no one had an Edirol. So, I headed home and got online and started reading about the Duet. Every single person that had one raved about it. I also realized that it was only for Macintosh, so if they don't get it right, no sales. I have to say, I liked that.
So, in the end, I went back to Guitar Center and I bought one.
I've had it now for a few hours, and all my latency, pop, and noise problems have, so far, gone away.
But even better, is that the sound quality is stunningly better. At the best of times with my TASCAM US-122, my guitar sound was "thin". It never really sounded anything close to good.
This is a whole new thing. Playing through Garageband is like playing through an amp.
And, it's so nice to have all that rebooting and restarting nonsense over with.
So far, my recommendation is, if you can afford one, go for the Apogee Duet. In fairness, I haven't tried anything but the Duet and my TASCAM, but people online that have agree that the sound quality of the Duet is as good as it gets in this price range.
So, I've seen a number of other posts in which various people complained about problems that sounded similar to mine. Currently, my experience says that it may be your audio interface (or its driver).

Macbook Pro, builtin iSight, can't record sound

I load up iMovie HD, make a new project, choose the "Built-in iSight" from the camera pulldown. I can successfully record video, but it does not record audio through my built in mic. I can conclude one of the following problems
1) Due to being completely inexperienced with my laptop and mac products in general, I have little clue what I am doing and just need some direction
or
2) I have a hardware error
I am going to assume question one and request some help from all you guys.

i'm aware of my other audio interface options, but i would expact this machine to have the basic options every 20 year old pc has, a simple plug and play difault to get audio into my computer. i bought it at b and h in NY and in their specs it says that it's a 'combo kack' - meaning both in and out analog audio ports. after cheaking mac's site it says only headphones.
also tryied to connect a digidesign mini mbox2, through the usb port, and i had to unplug it, shut down the mbp, restart it again etc.. and it also doesn't always work propely and makes all kinds of digital error sounds.
although in this case i can't that the mbox is not damaged.
over all it's very dissapointing. it's my first mac and i figured it would be a much more idiot proof, user freindly work tool.
if you got any other tips i'd appreciate that
thanx alot for the focusrite link

E-MU 0404 setup: Can't record

Hey all,
This card is getting the best of me! I've got it installed and have audio but can't record into CoolEdit or Sonar. I've got peak meters and sends in the proper strips (i think) and can see the audio fluctuate when speaking into the mic, but nothing records. I've gone through the manuals, which just so features, not how to actually get this thing working. (typical windows xp machine)
Can someone point me in the right direction? Is there some online documentaion on how to get this thing to actually work?
-frustrated beyond belief,
cristofer

VERY frustrating that no one is helping with this very difficult card.
Recap: After hours of frustration, I got the card installed and at least have audio now. If I play an mp3 using winamp, it records in Sonar 5 perfect. If I try to record using a mic through a mixer board I get nothing. I DO get all the proper levels in the emu mixer thing. Inputs/peak meters all show healthy line levels. Still, I go to record in Sonar and I get nothing. Very frustrating! I know the levels are there, I can see them. I get sound back OUT of the compter to the mixer and monitors, so I know it's all hooked up correctly.
I've been recording since the DOS days and have never had anything give me this much trouble. I think it may be time to go for an M-Audio card.
Why is Emu not letting anything record the sound via the line ins?

I have a record player hooked up through the audio port. The input volume is registering high, but there is no output anywhere. Help?

I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input". The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere. Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

keithstopher,
You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
You may want to check into something like the following, there are may out there, see what fits your needs best.
http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
Hope this helps

Can't see photos of iPhoto through my Apple TV after moving the iPhoto library to my Airport Extreme Disk. It keeps "loading user's library" forever...

Hi there,
some days ago I purchased an Airport Extreme router with disk to move my iphoto library there and free space of my crowded macbook pro.
Everything was working well (iphoto takes a little bit longer to start and quit) but now I can't see my photo library through my apple tv.
It keeps loading the library forever.
Is there any problem doing that?
Thanks
jm

Help,
Thanks for the quick answer and for the welcome.
Yes I selected it in the iTunes sharing options (in fact several times, with resets in between just in case)
I think that it's related to the size of the library (more than 8 gb) and e fact that is in a remote disk (in the AirPort Extreme)
Hope anyone has the solution :-))
Thanks again!
Jm

How to filter records in EIS drill through using template SQL

Hi,
I'm looking for an option to filter records in EIS drill through using Template SQL.
For eg: If we user runs drill through on 2011, it should restrict display of Jan & Feb and should display records for other months.
I tried using NOT IN clause, but got an error.
Can any one help me in understanding how this needs to be defined in template SQL
Thanks in advance

Hi Glenn,
I'm able to filter the records for specific periods.
However, I'm facing another problem now.
When I try to run drill through I get 'OLAP_error (1192025): Unknown Error: Not a valid Entry' error.
This is happening when I include condition as ((($$ab.ACCOUNT_CODE-COLUMN $$) IN ($$Account-VALUE$$)))
Here, ACCOUNT_CODE is field from Account dimension table and 'Account' is the name of the dimension.
If I remove this statement and run drill through, it runs but shows data for all accounts (irrespective of the Account selected)resulting in incorrect data.
Our RDBMS is Oracle. Can you please help me with this
Thanks

Can I record in LE8 just through a Boss DD3?

Similar Messages

Maybe you are looking for