Can I record my voice slide by slide in Keynote?

I know that I can record my voice over in Keynote by recording the entire slideshow, but what if I mess up on one slide?
Is there a way I can record just slide by slide rather than the whole project?

You can make smaller recordings as audio files in QT and place one audio file on each slide. With the file on the slide and selected, you can set its start using the Build Inspector.
In QuickTime, select File > New Audio Recording and when ready to record, click on the red button. Click on the button again to stop recording. File > Export the file to either the movies folder or your desktop.
In Keynote, either drag the audio file from the desktop to your slide or place the file from the Media Browser (Movies) Tab. Select the audio file on your slide and in the Build Inspector > Build In > Start Audio and in the More Options section select the Start Build On Click or Automatically (and set any desired delays)

Similar Messages

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?

When I'm playing games on my Mac, I want to my viewers (from YouTube) to hear whats going on in the game, as far as I know, I can only record my voice audio, and the screen. Is there anyway I can record game audio too?
You have two basic options. One is to use a commercial screen recording app with access to system audio built into the app and the other is to add a system extension like SoundFlower that allows the QT X screen recorder to access/record the system audio. I use the former so I am not that familiar with SoundFlower but there should be several posts to this forum covering this topic.

Can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in?

can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in or interface?

Alas, poor Logic, I knew him well.
Recording wise, It will be much the same as Garageband but you will need to read manuals as Logic doesn't set things up for you. You must choose input and output devices, create the correct tracks. Logic was designed for professional use so it expects users to be somewhat familiar with recording/editing techniques, in other words, won't hold your hand or be nearly as easy to use.

I can't record my voice

I can't record my voice in garage band. I have a USB Logitech mic that works fine but I can't seem to get garage band to connect with it. I have gone into system prefrences adn made sure everything is working so it has to be something in garage band that I am not doing right. What could I do to fix this? Thank you.

http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface

HT2508 How can I record my voice through my Mac?

How can I record my voice to my Mac?

Use GarageBand.
In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

How many min. can i record with voice record with MuVo V200 1

Hi,
I'm going to buy the Creative MuVo V200 GB.
Now my questions about this player.
How many minutes can i record over voice recording.
Maybe someone can tell me how much Megabytes minute of recording will take.
Are there different quality levels of recording?
In which format does the player save the recordings?
I will use the player to record lectures at the uni'versity.
Did anyone have done this?

Can I record everything in just one slide?

Hello,
I’m trying to create an 30-second flash animation of
our software, with some textual callouts. Since I’ve got the
Adobe Technical Communication Suite, I figured I’d use
Captivate for the job, but I’m new to it and can’t get
my head around some things. If someone has the time to point me in
the right direction, I’d appreciate it. I have tried checking
the help and rummaging through forums, but still can’t get it
to work the way I want.
I’m using the “Full Motion Recording” mode,
since our software is pretty interactive in real-time and I want to
show that. All I want is to do is record about 30 seconds of me
using our software, and afterwards add text callouts here and
there, before exporting to an .swf file.
Question 1: Captivate automatically chops up my recording
into several “slides”, is there a way to make it put
everything in just one slide? Or set the default time of a slide in
order to get my entire recording in one single slide? The problem
is, if I want to place a callout just between two slides…
well, I can’t do that right? I just want one and the same
timeline for my entire recording.
Question 2: After the recording is done, is there a way to
adjust the speed, or pause, certain segments of the recording? For
example, if I realize that the viewer of my flash video needs a
couple of seconds longer to read a certain callout, I want to
“pause” or “extend” that point in the
timeline for a bit. Can I do that, or do I need to record the
entire thing from the beginning and actually pause myself at the
appropriate time?
I’d be thankful for all advice and suggestions. I
realize I’m new to this, so any nudges in the right direction
would be appreciated!
/Tom

Hey there Tom
From my experience, the only time I need full motion is
during a drag & drop or scrolling type of action when the view
"moves" like a film.
My suggestion is that you plan what you want to do (click
here, then there, then select that button etc.)
Step 2 is to start a new project and select "Demonstration"
as the recording type, spec the size of the recording window if
needed and start recording (You might want to use auto capture
which would automatically record all interactions and key strokes,
but please remember to "manually" capture certain screens using
Print Screen e.g. after a drop down menu has opened.) (Hint 2 -
Rather record too many screens than miss one critical one out)
Step 3 would be to stop recording and edit the individual
slides with captions, animations etc. At this stage, you can
specify exactly how long each screen would display, when your
captions etc appear and for how long they show.
In summary, a decently built demo has a seperate slide for
each change in what the user would see on the screen, with FMR
being used to "tie together" 2 views where a movement action causes
the transition.
Hope this helps
Andrew

With my iPhone 5s, can I record long voice memo to the cloud and not worry about storage on phone?

With my iPhone 5s, can I record a long voice memo to the cloud and not worry about storage space on phone?

You can't add music to the cloud, whether it will show there for streaming and redownloading depends upon what country that you are in. If you are in a country where music is available in the cloud then you don't have to download the music from the store, if you turn Settings > iTunes & App Store > Music (under the 'show all' heading) 'on' then you should be able to stream purchased music in the Music app without downloading it - your phone will need to be online in order to stream, and if using 3G/4G then it will use some of your data allowance.
If you download an album or a track then it will be downloaded onto your phone. You can't upload music to the cloud from an iOS device. Whether music that you've bought shows for streaming depends upon what country that you are in and if the album or track remains in the store (unless you've subscribed to iTunes Match), and if you are connected to a network.

How can I record my voice on iMovie without needing to place a photo or video in?

I'm trying to make an anime review. But before placing photos in it, I wanted to record my voice first before adding pictures in it. So I was wondering what do I do to actually get my voice in it without it being cut because there were no photos or videos placed in? (I use a macbook)

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

How can I record my voice in my MBP

I am a new Mac user and I was wondering if I could record my voice in my MBP?
I didn't buy any additional software but the one that comes with the Leopard.

I don't know what "came with your Leopard" but if Garageband "came with your Leopard" you will be able to record your voice in that. You can also try Audacity which is a free recording/editing program for Audio.
Wrong Forum by the way...

How can I record EAX voice effect

Hi,
I have a SB 5. board in my machine and in EAX Control Panel I've beeing joking a lot with some voice effects like Zeus or Chipmunk.
But when I try to record my Microphone sound using any kind of program, those effects are not recorded, only my normal voice. For voice chats, the result is the same: I can hear my voice modified but other people don't.
So, how should I proceed to record those effects and/or make then 'hearable' for other people thru voiced chats like MSN or SKYPE ?
Thank you,
Kurt

See User's Manual page 3-3.
If you do not have a manual you find it here from
If your card is Bulk then you find the manual from here.
If you do not have the Creative Surround Mixer -software then install it first
(bundled with your card (CD)).
The rec level is the red (left most) slider and the source selector is above the
slider. Select there "What U hear".
.jtp

How can I record a voice over and save as MP3?

Good morning! I do voice overs. In my studio I STILL have a PC and use adobe audition. For my day to day business I know have a MAC BOOK PRO. I am going on vacation and need to record on my MacBook Pro with Garage Band.
I have successfully set up my Mic(studio Projects C1) and my travel PreAmp (MAudioDuo) to record in Garage Band. All I need is dry voice. I have recorded a track but need to save is as an MP3. The test track I recorded is about 15 seconds long but yet plays for 30 seconds...I have deleted everything after the voice but it still seems like the track is longer. I have to put in MP3 format. How do I do this? This is a nice program but looks like it is too much for what I need it to do. So, any other recommendations on more appropriate software is appreciated if needed.
Message was edited by: suesmac

yet plays for 30 seconds.
move the end of project marker to the 15 second mark:
http://www.bulletsandbones.com/GB/GBFAQ.html#eos
I have to put in MP3 format.
when you "share" it, tick the Compress checkBox
any other recommendations on more appropriate software
any audio editor could be used as well:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors

How can I record my voice?

A few months ago I upgraded from my faithful PowerMac G4 to a snazzy flat white iMac G5 with Tiger. I'm finding that there are lots of things I can no longer do and one of them is recording new alert sounds, welcome messages and so on. In Sound there doesn't seem to be a 'record new' option. I have the internal mike of course and headphones with a mouth mike that i use with Skype.
Help!
Garland

Your iMac came with GarageBand. It can record. I know it has problems recording from iSight microphones so I don't know how the iMac's internal microphone will work.
To add alert sounds, save your sounds in AIFF format and then follow this tip:
http://www.mactipsandtricks.com/tips/display.lasso?mactip=107

Can I record music/voice from a tape player?

Is there some way I can connect a tape player to my MacBook Pro and record the contents of a cassette tape?

Sairy wrote:
I'll try Audacity.
There are a number of Mac audio editors out there (Sound Studio, Amadeus, TwistedWave, Wave Editor, etc). Audacity is free and quite powerful, but its interface is less polished and not very Mac-like, and some its features are rather idiosyncratic. If you haven't used an audio editor before, that shouldn't bother you -- much. Make sure to read the documentation to understand how it works.
If you use Audacity, remember that it uses its own .aup format. You should export the original recordings to AIFF or WAVE and keep them, in case you want to go back and re-edit them with other tools.
I have a basic cassette player
Remember the basic law of computing: GIGO. It really depends on how much those recordings mean to you, but, IMHO, you should record from the best player you can lay your hands on. No amount of later processing can make recordings from the output of a bad player sound like the output of a good player.
tapes we have to put on CDs
Don't expect too much. Stuff that sounds acceptable on a cassette player may sound awful on a CD player, because the CD's much higher audio quality will lay bare all the shortcomings of the original tapes. Experiment with Audacity's noise reduction filter. Check also Audacity's wiki, I think they have some instructions specifically for digitising analogue audio tapes.

Can i record voice in the VocaLive app then use it in Garageband?

Can i record the voice track in other apps, like VOcaLIve or any other with voice fx (like Pitch ) and use it to do my music in garageband?

If you can export the recording from your vocal app as an audio file via email, then this could give you a starting poing for getting it into garageband
http://ipad.slapwagon.co.uk/
cheers
@zorin

Can I record my voice slide by slide in Keynote?

Similar Messages

Maybe you are looking for