Can i record with more than one audio interface

I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

josteinfromoslo wrote:
can i record with more than one audio interface
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
josteinfromoslo wrote:
I need to record 16 tracks
GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
http://www.bulletsandbones.com/GB/TricksHacks.html

Similar Messages

HT1473 how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

Import the CDs to iTunes one at a time, following these instructions.
Once the tracks are in your iTunes library, put them into a playlist, and get them into the order you want. Or if you by "scramble" you mean a randomly shuffled order, use the crossing arrows at the lower left to do so.
When you are ready, insert a blank CD, use the command File > Burn Playlist to Disc, and create an audio CD. I strongly suggest using CD-Rs rather than CD-RWs, since the latter often have trouble in normal CD players.

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

How to retrieve unique records with more than one column

I have a table sps_prod as described below -
POGNAME VARCHAR2(1500)
INDEX#VERSION VARCHAR2(200)
POG_MODEL_STATUS VARCHAR2(100)
POG_LAYOUT_TYPE VARCHAR2(500)
POG_MARKET_SPECIFIC VARCHAR2(500)
POG_CONTACT_NUMBER VARCHAR2(100)
AREA_SUPPORTED VARCHAR2(500)
POG_COMMENTS VARCHAR2(1500)
POG_FOOTER_COMMENTS VARCHAR2(1500)
POG_ELECTRICAL_LIST_1 VARCHAR2(1500)
POG_ELECTRICAL_LIST_2 VARCHAR2(1500)
POG_CARPENTRY_1 VARCHAR2(1500)
POG_CARPENTRY_2 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_1 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_2 VARCHAR2(1500)
FIXTURE_REORDER_NUMBER VARCHAR2(200)
FIXTURE_ID VARCHAR2(200)
FIXTURE_NAME VARCHAR2(500)
FIXTURE_IMAGE VARCHAR2(500)
PART_REORDER_NUMBER_9 VARCHAR2(500)
PART_FIXTURE_ID_9 VARCHAR2(500)
PART_FIXTURE_NAME_9 VARCHAR2(500)
PART_FIXTURE_IMAGE_9 VARCHAR2(500)
UPC VARCHAR2(50)
ITEM_NUMBER VARCHAR2(50)
DESCRIPTION VARCHAR2(700)
MERCH_TYPE VARCHAR2(20)
HEIGHT VARCHAR2(100)
WIDTH VARCHAR2(100)
DEPTH VARCHAR2(100)
CREATE_TS DATE
There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. There are no keys defined on the table.
I guess this is a simple problem but the fact that I am trying to retrieve all the columns is stumbling me.
Thanks in advance.

Hi,
Sanders_2503 wrote:
... There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. I don't see a column called reorder_number. Do you mean fixture_reorder_number or part_reorder_number_9?
So you want only one row for each distinct combination of fixture_name and some other column (I'll assume that's fixture_reorder_number). Does it matter which row? They won't necessarily have the same values for the other columns.
The query below returns the one with the first pogname (in sort order):
WITH     got_r_num     AS
     SELECT pogname, index#version, pog_model_status, pog_layout_type
     ,     pog_market_specific, pog_contact_number, fixture_name
     ,     ROW_NUMBER () OVER ( PARTITION BY fixture_name
                               ,                    fixture_reorder_number
                         ORDER BY        pogname
                       )         AS r_num
     FROM    sps_prod
SELECT pogname, index#version, pog_model_status, pog_layout_type
,     pog_market_specific, pog_contact_number, fixture_name
FROM     got_r_num
WHERE     r_num     = 1
;If there happens to be a tie (that is, two or more rows with the same fixture_name, fixture_number, and first pogname) then one of the will be chosen arbitrarily.
Instead of "ORDER BY pogname", you can ORDER BY any other columns or expressions, but you must have an analytic ORDER BY clause. You can make it "ORDER BY NULL" if you really want to pcik an arbitrary row.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data (or a couple of examples of acceptable results).
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.

Can itunes sync with more than one apple tv

I have two apple tv in the house. can i sync both to my itunes account. right now only one is sync.. other is streaming.. would rather have both sync. would like to do this as the one in the bedroom i want to play songs with but do not want to have my computer on all the time.. kids around to much ect.
thanks

yes you connect both appletv's to your itunes library and sync to both of them (that is how my 2 are currently configured).

BPM with more than one incoming interface.

Hi experts.
My scenario is File --> BPM --> SOAP
The BPM is:    Fork Step               - Necessary branches is set to one.
                                                               First branch - Async recieve step for Msg1 Interface. Start process is checked.
                                                               Second branch - Async recieve step for Msg2 Interface. Start process is checked.
                        Transformation step - Which maps the recieved msg to another interface.
                        Async Send step    - Which sends the message to the receiver.
There are a few more steps in the bpm before the send step but they are not relevant.
The goal of the bpm is to recieve one of the 2 messages and perform the needed actions on it.
I took the idea from the SAP BASIS template of the "BPMpattermColectMultiIf" bpm,
and changed to the number of necessary branches to 1.
My problem is that the process runs fine only for the first msg.
When Msg2 is being set to the bpm a SYS EROR ocuurs in the inbound side of the bpm "BPM parameter error".
I have made a few checks and figured that if the Property of "Start process" is not set on both recieve steps the error doesn't ocurr.
Hope you will be able to help me solve my problem.
Regards Max.

As far as i understand, you have set on two branches for receiver "Start Process" ??
Yes you are wright.
Both recieve steps can starts the process.
But in case the property "start Process" of the first MSG recieve step is unchecked,
the second msg is recieved just fine.
And in case both recieve steps may start the process only the first msg could be recieved.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Can i use my ipod with more than one computer?

i synched my ipod with one computer, hooked it up to another and it says i can't sync with more than one library? it says i have to restore it but i dont want to delete my music off of my ipod, i just want to add the music from this other library

I have two different iPods and two computers. I regularly use either iPod on either computer.
First set the preferences so itunes will not automatically sync when ipod is connected.
Then connect the ipod and set itunes to manually manage music.
Drag and drop whatever content you want to the device showing on the left.
If this was the default setup, there wouldn't be all these posts about people losing all their music when they connect their ipod.

HT5622 Can Face Time be used to connect with more than one person at a time?

Can I connect with more than one person at a time when using Face Time?

You mean like a conference call? No, unfortunately.

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Can i record with more than one audio interface

Similar Messages

Maybe you are looking for