Can I recover data if my phone won't power up?

So my iphone 6 accidentally went through the wash on Monday night. I immeadately tried to dry it out in a pyrex dish of rice with a heating pad covering the dish. It was in rice for 36 hours and still won't power back up. I knew it was a long shot, but it previously worked for a iphone 3s and 4g. Any suggestions on possibly recovering this hardware or how to recover the data (no icloud storage) w/o the abilty to power the device on?

Not really - that data is gone unless the phone somehow wakes up
The conventional wisdom for the rice is 5-7 days though

Similar Messages

I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

Can I recover data from a reformatted hard drive? I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew. My bad but is all lost??

Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....

You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan

A message saying I had to restore my iPad to factory settings came up, can I recover data from previous back-ups?

Tonight, a message came up on iTunes came up saying I need to restore my iPad to factory settings came up. Is there any way I can avoid doing a factory restoration? If not, can I recover data from previous backups?

If you got the message that you need to connect to iTunes, there is no choice now but to restore the iOS software. Yes, you can restore from a backup after you restore the iOS software.
You can only restore now by connecting to your computer and using iTunes, and at the end of the restore process, you will be asked if you want to restore from your iTunes backup to which you will say yes and then sync your iPad as well. Syncing will transfer all of your apps, music, movie, books, photos etc, back to the device. If you do not backup and sync with iTunes, you can still restore from an iCloud backup after you restore the software in iTunes.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

My iphone 4s will not turn on or connect to itunes.... is there any way i can get the data from the phone?

is there any way i can get the data from the phone?

Hi webby84,
Welcome to Apple Support Communities.
It sounds like you're experiencing a hardware issue with your iPhone.
These links are a good starting point for troubleshooting:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy

Cisco phones won't power up

I have cisco 6945 phones connected to two Catalyst 6513-E switches in a VSS pair.
This morning, 3 phones went offline on one of the blades on switch two (they went dark).
When I do a show module, everything checks out fine --no errors on the blade. Diagnostics pass. If I connect a laptop to the ports having the issue, the system connects, fetches an IP and everything is fine. Tried different phones, cabled in directly, etc. -phones won't power.
Here is the power info for the port(s) and blade/switch:
sho power inline g2/2/15
Interface Admin Priority     Oper      Power(Watts)    Device             Class
                 (enabled )            From PS To PD
Gi2/2/15 auto   low        off              0       0 n/a                   n/a
Interface AdminPowerMax Police ActConsumption
             (Watts)
Gi2/2/15           30.0 off               n/a
Interface: Gi2/2/15
Inline Power Mode: auto
Priority: low
Operational status: off
Device Detected: no
Device Type: n/a
IEEE Class: n/a
Discovery mechanism used/configured: Ieee and Cisco
Police: off
Power Allocated
Admin Value: 30.0
Power drawn from the source: 0
Power available to the device: 0
Actual consumption
Measured at the port: n/a
Maximum Power drawn by the device since powered on: 2.6
Absent Counter: 0
Over Current Counter: 0
Short Current Counter: 0
Invalid Signature Counter: 0
Power Denied Counter: 0
UIC-DIST6513-02#sho power switch 2
Switch Number: 2
system power redundancy mode = redundant
system power total =     3795.12 Watts (90.36 Amps @ 42V)
system power used =      2560.74 Watts (60.97 Amps @ 42V)
system power available = 1234.38 Watts (29.39 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
1    WS-CAC-4000W-US    3795.12 90.36 OK     OK     on
2    WS-CAC-4000W-US    3795.12 90.36 OK     OK     on
3    none
4    none
                        Pwr-Allocated Oper
Fan Type               Watts   A @42V State
1    WS-C6513-E-FAN      375.06 8.93 OK
                        Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
1    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
2    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
3    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
4    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
5    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
6    WS-X6148E-GE-45AT   112.56 2.68   112.56 2.68 on    on
7    VS-SUP2T-10G        435.54 10.37   435.54 10.37 on    on
8    (Redundant Sup)       -     -      435.54 10.37 -     -
                        Inline         Inline         Inline         Inline
                        Pwr-Requested Pwr-Allocated Local-Pwr-Pool Power
Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V Status
1    WS-F6K-48-AT          3.78 0.09     4.20 0.10    34.44 0.82 On
2    WS-F6K-48-AT         80.64 1.92    88.20 2.10    34.44 0.82 On
3    WS-F6K-48-AT         91.98 2.19   100.80 2.40    34.44 0.82 On
4    WS-F6K-48-AT         88.20 2.10    96.60 2.30    34.44 0.82 On
5    WS-F6K-48-AT         76.86 1.83    42.00 1.00    34.44 0.82 On
6    WS-F6K-48-AT         91.98 2.19   100.80 2.40    34.44 0.82 On
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit =   10920.00 Watts (260.00 Amps @ 42V)
system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
system primary power used =              2560.74 Watts (60.97 Amps @ 42V)
system auxiliary power used =            0 Watt
                        Inline         Inline-Pwr     Inline-Pwr     VDB
                        Pwr-Limit      Used-Thru-Pri Used-Thru-Aux Aux-Pwr
Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V Capable
1    WS-F6K-48-AT       1066.80 25.40    38.64 0.92     -     -     Yes
2    WS-F6K-48-AT       1066.80 25.40   122.64 2.92     -     -     Yes
3    WS-F6K-48-AT       1066.80 25.40   135.24 3.22     -     -     Yes
4    WS-F6K-48-AT       1066.80 25.40   131.04 3.12     -     -     Yes
5    WS-F6K-48-AT       1066.80 25.40    76.44 1.82     -     -     Yes
6    WS-F6K-48-AT       1066.80 25.40   135.24 3.22     -     -     Yes
Totals:                                 639.24 15.22     -     -
What could be happening here?

Just want to put it out there that I am no "expert" on what a 61XX line card can/can't do.
Can you try to run a TDR on the line?
1. Command: test cable tdr interface g2/2/15;
2. Wait for 61 seconds for the test to run;
3. Command: sh  cable tdr interface g2/2/15; and
4. Post the output to #3.
NOTE: Yes, it takes 61 seconds to run a TDR on a chassis-based system.

HT4061 My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen.

My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen. When I connect my phone to iTunes on my laptop, the only option it gives me is to restore my phone's factory settings. But won't this erase all my photos, contacts, etc? Any suggestions?

It's in recovery mode. You don't have a choice. You have to restore the phone. Anything that was on it is already gone.
If you've been backing up/syncing on a regular basis, you won't lose anything except what's changed since the last backup.

Help Needed please: Phone won't power up...

Hello all. I am new here and I have a Nokia N96 which I purchased from Asia, so Nokia USA will not service my phone. I was updating firmware last night and everything froze. I patiently waited for around two hours before I disconnected the phone. Now the phone won’t power up. It vibrates a little and the light on the square control pad goes on. That’s about it. Screen and everything else is off. I tried what other people have suggested such as taking off the battery, pressing combination keys, etc. Any more suggestions or solutions for my problem. Thank you in advance for your kind assistance.

What you are thinking of doing will invalidate your warranty and as a result cannot be discussed here.
The only option available to you which won't invalidate your warranty is to send it to a Nokia Care Point which will fix it for you. Unfortunately, it will mean having to send it to Asia.
I know you have started multiple threads on this issue but telling you anymore then we already have will break the forum rules and be deleted by the moderators. You could however try asking the same question at some of the other unofficial boards.

HT4623 Phone won't power on.

My phone won't power on. I tried holding down the power & home button for minutes at a time. Tried charging with multiple charges from multiple outlets and sources. The apple advice is telling me to upgrade the software on my phone. How am I supposed to do this if the phone won't turn on? Am I missing something here?

If the iPhone doesn't power on when connected to multiple different chargers and computers and using different USB cables, the iPhone has a hardware problem.

Dear Apple: Can't recover data from iPad / no exploit for A5 bootrom

Dear Apple,
Looks like I'm not the only one who has had a failed upgrade to 6.1.3. Now my mother's iPad 2 is in recovery mode with 1000+ pictures lost in LaLaLand.
No recent backup, no iCloud.
I've done lots of research on how I can recover the data and the only possible way seems to be accessing the Ramdisk via SSH.
But there is no bootrom exploit for A5 devices, so it won't work.
Thanks Apple, I've lost photos of our family dog that passed this year, as well as photos from my grandmother's memorial service from this year.
I hope an Apple employee see's this...
Your process for upgrading iOS versions should be less prone to errors or failures. Required syncs or backups before upgrades should be required.
I could send my iPad to the main data recovery service Apple has partnered with... but I don't have $400 - $1200 to spend.
But even if I did, I would assume that only Apple has the power to access the data that is now in a digital vault, protected by their millions of dollars of revenue.
How can a top-leader in the consumer electronics industry let down so many of their loyal customers? Just google "recover data on iPad" or iPhone and you'll see that 1000's of people across the globe are having the same issue with iOS upgrades.
Please Apple, at least create a service to allow users to send in devices for data recovery. Only you have the power to "hack" into our devices.
Sincerly,
Forever lost memories?

Apple aren't here. This is a user to user forum.
You've lost your data because, as you said: "No recent backup, no iCloud." - that's your fault, no-one else's.
Backing up is necessary regardless of whether you are upgrading or not. Your iPad could've been stolen or damaged and you'd've lost the data the same. Apple provides you with at least 3 ways of retaining copies of your photos - you chose not to use them.
Call this a lesson learned in the consequences of not backing up as advised.

Can I recover data from an internal hard drive that I removed from my MB Pro?

A few months back my HD failed on my MB pro. I have since then replaced this HD with a SSHD. My question is can I recover this data from the old hard drive? I remember when I was at the Genius Bar one of the techs told me there was a company I could send the HD to and they could recover the data. Does anyone know of such a company?
Thanks

here is one of many companies. But it is expensive and not guaranteed. http://www.drivesaversdatarecovery.com/

Can I recover data in hierarchical folder structure, deleted by rm -rf command

Bymistake I used the command "sudo rm -rf " to wrong folder in other volume and loose about 35GB important data. Can I recoved it in folder like structure way, I tried maky application but they sort data in video , audio , pdf categories which are impossible to re-arrange.
Please solve my problem.
Thanks.

Mac Data Recovery best solution to recover all your lost& deleted files from Mac. This tool supports recovery of a broad range of file
types from Mac hard drives and volumes. This tool is equipped to scan and recover data from any NTFS-formatted Windows Boot Camp
partition. You can also search your lost or deleted volumes on FAT, NTFS, and ExFAT formatted drives. For more information and free
download click http://macdatarecovery-tools.weebly.com

Updated latest version now phone won't power on

I just got a new iPhone 4 and updated the iOS. Now, the phone won't turn on. When I plug it in, it doesn't do anything either. There's no water damage or any other damage. What do I do?!

Google
fascinate won't update to eh03
Read through the first post that comes up in the search
Follow instructions and you should be up and running in less than 10 minutes.
The other option is to take it to Verizon and have them send you a phone if you are still under warranty
Hope this helps

HT201412 I phone won't power on. I have nothing but a black screen

I phone won't turn on. I have nothing but a blank screen. Has been charging for over an hour.

do a reset, hold down the home/sleeep button together until you see the apple log oand then release, then wait for hte phone to boot back up

My phone won't power up after updating please help

My phone will not power up after updating...it's been three hours...please help

Hey laurelletoo,
Welcome to Apple Support Communities.
From what I gather, there’s an issue turning your iPhone 5 on after updating it. Take a look at the article below and try running through the suggestions that it provides.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
-Jason

Can I recover data if my phone won't power up?

Similar Messages

Maybe you are looking for