Can I recover iPhoto using the original system install disk
I have somehow lost a working version of iPhoto on my power Mac. The only version that is on the computer is version 2.01 and it will not operate with Lepoard. Can I recover iPhoto by reinstalling the G5 install disk. Updating to iPhoto 11 won' t work because my processor is not "intel"
Hello Kathy,
For a G5 it wouldn't be on the Install Disc, you'd need an iLife Disc... did you just up date to 10.5.x?
Similar Messages
-
1. With just ONE inattentive sweep of my finger one page of my note disappered. Further more, the same page in my iPad was deleted automatically too! How could this happen? Is there any way it can be recovered without using the backup feature from iCloud? The data is vey important to me?
2. I havn't connect the power code to my iPad yet, the backup copy in the iClout was before the accident as I checked in iPad. Is there any way that I could open my notes in iCloud backup so that I can copy the missing page and move back to my iPad and iPhone?
Thanks a lot for any help!
XueyuSorry, no. The only way to restore this note is to restore from a backup that contains it.
-
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Is it possible to use the snow leopard install disk for bootcamp setup?
I'm going to be installing a windows 7 partition through bootcamp on my macbook, but I can no longer find the two original install disks that it came with. So my question was whether or not its possible to go through the bootcamp process with the snow leopard install disk?
Do you mean a "Retail OSX Snow Leopard Install DVD for USD 29" ?
If so, then yes. use it.
Sounds to me like the Original Install Discs you refer to are OSX 10.5 Leopard ones, right ?
These won't work with Windows 7 since Windows 7 requires OSX Snow Leopard DVD at minimum for the Driver Installation and BootCamp Assistant version 3.x as well, which is also only avaiable in OSX Snow Leopard.
http://support.apple.com/kb/HT1899
Stefan -
After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP
Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager. -
I forgott my Admin Password, how can I recover it without the instalation disk? Thank you!
Hi guys!
I changed my Admin password one of this days, and stupidly I didn´t wrote it down. I cannot install anything on my laptop, I cannot do anything that involves the password.
How can I recover, in a safe way, without instalation disk?
Thanks for your time!Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101 -
How do you make a back-up copy of the OSX Leopard Install Disk 1?
I'd like to make a back-up copy of +Leopard Install Disk #1+ but I only have one DVD read/write machine onboard the Mac Pro.
Can I insert the Leopard DVD, copy it to my desktop, remove it from the drive, insert a blank DVD and burn the contents to the blank DVD?
I'm trying to create a simple bootable Leopard DVD that will enable me to (a) boot up, then restore my System HD from a Time Machine Archive; and/or (b) run +Disk Utility+ from a source other than the main System HD if necessary.
I know I can do these things from the original Leopard Install DVD but I'm trying to preserve it and use it as little as possible in the event I need to reinstall Leopard.In addition to Malcolm's instructions I want to point out that you need a Dual Layer
DVD+R (or -R) for this. Those are quite flaky and some might not work or not work well when you burn them. I was recommended Verbatim DL DVD+R as being reliable. try those.
also, instead of burning to a copy of the install Disk 1 to a DVD you can clone it to a partition on your hard drive. Just make a small partition, insert the DVD, select it in Disk Utility and click on "restore" tab. select the DVD as the source and the partition as the target and hit "restore". this will give you a very fast bootable installer right on your hard drive. -
Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?
The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08. You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
iLife 08's full system requirements are:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
iDVD ’08 requires 733MHz or faster processor
512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
3 GB of available disk space
DVD drive required for installation
From: http://support.apple.com/kb/HT1010
OT -
Hi there.
I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
Hence:
I lost my password for my original iTunes account
I can't recover it because the email address it is registered under is not longer valid
How can I access my old account?
Can't find a place to change the email address to my new one without the password which I no longer remember.
There is no way to just erase Apple-ID's on my device either.
What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
Cheers!If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
http://support.apple.com/kb/ht1911 -
I can't seem to use the balance left in my i-tunes account without re-entering the code from the original i-tunes gift card. I no longer have the card. How can I purchase music using the balance without the card?
the code from the original i-tunes gift card is not required again once redeemed.
Riki from bc wrote:
I can't seem to use the balance left in my i-tunes account
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
How can I export a folder of images using the original file data?
I have edited my images within the "Develop" mode, but now need to export as jpg's using those settings (note: some are now B&W) and then I also need to process as jpg's using the original settings (color), so my client has all the original color files as well. My files were all shot in the Nikon RAW format, but I can't figure out how to export all the images without using the develop adjustments I have made to each file, including having changed many to B&W. Is there a way to do this? Note that I also don't want to lose all of my adjustments, so can't just reset them all, if that's even an option.
2) Now I need to export all the images that have at least 2 stars
(around 1200), so I can give the client a folder of "originals." This
way, they can view images that didn't make the final edit (album) and
will also be able to print an image that I converted to B&W for
their album in color.
First of all, I think making a backup of your directory (using Explorer or Finder or whatever) might be prudent before you start this little experiment!
So, all of your originals are in one folder, and ~1200 of those are 2-star and 384 are 5-star and have edits, correct?
What might be easiest (although not the most effecient) is to just click on the folder, then use the Library Filter to select everything that's 2 stars and above. This will select all the images that need exporting.
Then follow Jao's instructions for creating a new collection and removing the edits. Make SURE you create your new collection with VIRTUAL COPIES or you're going to wipe out everything you've done.
Your new collection should then have virtual copies of everything 2-star and above, in their original unadulterated state. You can then export to JPG.
I think from now on I will export those files with 2 stars first, then narrow down the the final 384 and make adjustments
You could always create a collection of your "keepers" (2-stars and above). Then, for every image you want to edit, be sure to edit the virtual copy and then put it in a subcollection under the main collection.
That way you kind of have a history of what you did, and you can export (or re-export) at any time. You don't even really need to keep the exported JPGs around, since you can always re-export.
Scott Kelby has a Lightroom book that illustrates this kind of workflow much better than I can. I highly recommend it. -
After using shift command 4 to send a photo to the desktop, how can I add iphoto to the list of"open with" menu ?
All that's doing is forcing iPhoto to import the image. Dragging it to the iPhoto icon will do the same, or create an automator action and save it as a Contextual menu item.
Regards
TD -
Can't get iphone to recognize itunes on my computer. do i have to use the original cord to connect? i can't find the cord. please advise.
Do you mean that iTunes doesn't recognize your phone when you plug it into your computer using the usb to dock cable? If so, see http://support.apple.com/kb/TS1538. (And yes, you need to use the usb to dock cable that came with your phone. If you dont' have it you'll have to buy another one.)
-
I bought my iPad from a friend and updated to iOS 7.1. Now in order to activate it I need to sign in using the original iTunes account but I can't contact the owner. Is there a way to get past this or should I toss my iPad into the garbage?
Ask previous owner to remove his device from account
http://support.apple.com/kb/TS4515
Maybe you are looking for
-
Hi, I am creating a vendor from a legacy file using a function IDOC_INPUT_CREDITOR. it is working fine if i use only one segment (E1LFA1M). But in my case i also have to save data into one field in table LFB1 for which i have to fill one m
-
HELP NEEDED - iTunes.exe -Corrupt File
I am getting this error message everytime I plug in my iPod to update thru iTunes. iTunes.exe - Corrupt File The file or directory/iPod_ControliTunes/TempFile is corrupt & unreadable. Please run the Chkdsk utility. So my question is....how do I backu
-
Revaluate Depreciation for an asset in prior years
Hi, I have a problem with a couple of assets. We are using 2 depreciation areas - one for statutory depreciation that is posted against GL accounts and one for fiscal purposes, which is only statistical. For some assets the depreciation key in the al
-
What happened to The Weather Channel HD Feed
Live in Comcast Elgin/Algonquin area. Channel 270 for The Weather Channel HD is broadcasting in SD feed. Anyone else experiencing this issue. All of my other HD channels are working properly.
-
Set up Telstra email on Outlook Express (5.5 or 6.0)
This page will help you set up your Telstra email with Outlook.com on Outlook Express version 5.5 or 6.0. Outlook is a registered trademark of Microsoft Corporation in the United States and/or other countries. Before you start You'll need your Telst