Can i redirect the responses to my form

can i redirect the responses to my form to a specific email address verses being sent to the response section on formscentral??

Hi,
Currently we only support sending Email Notifications to form author. I'm not sure which specific email address you are talking about. Is it also a FormsCentral ID? If so, you could share the form to it, and make it as Co-author. Then you (or the owner of the ID) open the shared form and enable the Email Notifications in Options tab. Please let me know if I misunderstood your question. Thanks!
Kind regards,
Shiyao Bao

Similar Messages

I accidentally deleted the responses on my form colum D U12 program, I need those response back

I accidentally deleted the responses on my form colum D U12 program, I need those response added back to my formcentral form

Hi;
You can copy all of the rows of data from the last point in History where they existed in the View Responses table and paste them all into the current point in time at once, you do not have to do that response by response. You do not have to do this one at a time.
1) Go to the View Responses tab
2) Click the History button (clock icon near bottom right)
3) Click on previous points in history and locate the best source for the responses that were deleted
4) Select all rows that were deleted and are missing from current time
Crtl+C to copy (Cmd+C on Mac)
6) Go to the most recent point in History now
7a) If you need to simply put the data back into existing rows that were just empty, the data had been deleted but not the rows click into the first cell (time submitted) and click Crtl+V (Cmd+V on Mac)
If you are not able to do that let me know and I can work futher with you on it.
7b) If you need these at the bottom of some existing/new responses simply click "Add Row" to add a new row to the bottom, click in the first cell and use Crtl+V to paste (Cmd+V on Mac)
7c) If you need to insert the rows in between existing rows use the "+" sign in between the rows you need the data inserted - repeat enough times to add the same number of rows you copied and then click in the first cell and use Crtl+V to paste (Cmd+V on Mac)
Let me know if you need further assistance.
Thanks,
Josh

How can i transfer the balance of iTunes form one to another if i haven't spent?

how can i transfer the balance of iTunes form one to another if i haven't spent?

You can't transfer a balance between accounts, it can only be used to buy content for the account that it's on (it also can't be used to gift content to another account)

How can I get the responsibility for concurrent programs

Guys,
How can I get the responsibility for a list of concurrent programs. Is there a query that I can run to get the results?
Thanks in advance,

Refer to Note: 134036.1 - WHOCANRUN.SQL - List Responsibilities That Can Run a Given Concurrent Program
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134036.1
From the output of the query in the note referenced above, you can run "Users of a Responsibility" concurrent program then to find out the list of users who have access to a certain responsibility.

HT1430 Sleep/wake button is broken. Can I redirect the sleep/ wake command to another button?

My wife also has an iPad 1. Her sleep/wake button is broke. I downloaded sb settings so she could shutdown to charge. She has to plug in to wake. Can I redirect the sleep/wake command to another button?

Are you charging it from the wall outlet? Or from a computer? It shouldn't need to be powered off to charge from a wall outlet.
However, it appears that you have jailbroken the device. This can cause problems with the functioning of the device. There's really not much we can do to help you with a jailbroken device other than to suggest you restore it to its original factory state.
Best of luck.

How can i disply the error in my forms which occurs from plsql package

Dear all
i am using 10g forms.
i have a package and in the pkg i am reading data from flat file using UTL_FILE and comparing with what user input in the form .
If that does not match then it is raising errors . but how can i display those errors in my forms .
Let say in my PKG The error is "Account no does not match " . this error message i wnat to show in my Forms .
For the error i have created one block :error.err_dtl.
I want to show here in :error.err_dtl.

Hello,
Several solutions:
You can write a procedure or a function in that package that returns a Boolean and/or an error message.
You can also, in your package, raise the RAISE_APPLICATION_ERROR(), then trap this error in the Forms calling code, via the DBMS_ERROR_CODE and DBMS_ERROR_TEXT variables.
Francois

How can i receive the information from a form ?

I created a form in Dreamweaver CS5 with some input fields and with a send button.
The question is how can I receive the information that is filled in by the visators.
Where can I tell to which email adress the information has to be send. Where can I find this in dreamweaver CS5?
Or what else do I have to do before a form is actually working and I'm receiving the input?
Already thanks
Ron

I'm just starting with building a site
so thanks for this email
2010/11/17 DeonH <[email protected]>
Hi there.
>
I don't know what your capabilities are regarding coding. I am no
programmer and use "Forms to Go" with much success. Take a look here:
http://bebosoft.com/products/formstogo/overview
>
Regards,
Deon
>

How can i upload the style of a form

I am having one form on my desktop.That form i already uploaded to my 800 client.But it can't show the general attributes.It shows in error : Style YBAA_SFSTYLE could not be assigned to the text node.How can I import style also for this form.

Hi Sowjanya
Please be aware that the smartform and smartstyles are to be downloaded separately to the system for future use/reference.
In your case; I believe the smartstyle has not been downloaded to your desktop or is not available to you for reuse.
Anyways, you need to upload both the smartform and smartstyle to the client to avoide the error.
Hope it helps.
Neer

How can I get the result of web forms by mail ????

Hi,
please,
can someone help me, I spent two days looking on internet to know what I need to install on the web server to get the result of web forms and send it by mail.
I can't find anything and I don't know what I should look for too ?
Thanks

Hi,
thanks for your answer but I was in fact trying to install Formication, I already opened a thread here :
http://discussions.apple.com/thread.jspa?threadID=841656&tstart=0
Can you help me with this one ?
I installed the last release of FormMail and it start to work now but I'm more insterested in "Formication".
I'm since two days trying to find documentation for this one and I finally decided to write directly to the author as I really can't find anything to install and use it.
If you know how to install or have any direction to give me it would be really fine.
Thanks

How can i see the output of a form

I am having one driver program and form.From these two how can i see the output.

Hi Sunny
You might already know; but for the driver program; a smartform is just a function module.
(In the smartform; this function module name can be found in the menu tab Environment -> Function Module Name.)
Note: The FM 'SSF_FUNCTION_MODULE_NAME' is obviously the correct way of getting the FM name from the smartform name !!
So all you need to do is call this function module passing any variable / tables you need to pass to the smartform from your driver program.
Hope it helps
Neer

Can I redirect the "Help" link in SRM 7.0?

SRM gurus,
We are using a recording tool u201CEpilogueu201D to replace the standard SAP help in R3.
Where can I modify the SRM program to redirect the help link of shopping cart screen to this third party user help URL?
We are using SRM 7.0.
Thanks in advance!
Fisher

Hi Fisher,
Please refer to help center of Web Dynpro ABAP applications:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/de/f1429b914148e192f334edc59f2f5d/content.htm
The related Web Dynpro Complement is u201CWDHC_COMPONENTu201D and the application is u201CPortahc_applicationu201D.
Check with your WD Abaper to explore.
Regards,
Donald

JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Hello Experts,
I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
Do someone encountered this before? Please help
Regards,
Alfred

Hello,
I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
Regards,
Alfred

Persistent HTTP Requests in BSP: Can you Flush the Response without Ending It?

Hello all,
I have been looking for a way to implement a persistent HTTP Request in a BSP. This means the server keeps the request open as long as possible and sends data periodically to the browser without closing the request. In other development environments, there would be a way to flush the response to the client, separate from closing the connection, thus making this possible. I have looked and do not see any way to do this.
Also, if it is not possible with a BSP, is there another way to do this via the Web Application Server?
Thanks for any help,
-Chris

There are various limits: the number of sockets / file descriptors that the operating system lets a program have open, the amount of socket buffer space in the operating system, the number of simultaneous connections that the web server allows. Each of these can be configured.
One problem is that a web server starts a thread for each hit. If you have 1000 simultaneous active hits you have 1000 threads. That is quite a lot. I've seen server OSes start buckling at around 400-500 threads. Given a suitable OS you may get higher with a bit of configuration, but I'd say the number of threads is rather a big concern. 100,000 threads? That dog don't hunt.
An alternative would be not to use a regular web server, but to use a NIO select -based server. Then you can have one thread that handles all the connections. I once did that to write a stock ticker applet. But if you want to do fully standards compliant HTTP implementation that's not trivial.
If you are writing the client applet as well as the server, consider using a simpler protocol than HTTP and writing a NIO server. NIO isn't quite trivial to get really right; look at examples and tutorials; google is your friend. If you can keep each client's connection open do so; establishing and tearing down hundreds or thousands of connections a second, and sending HTTP request and reply headers, is going to eat network and CPU resources.
If you are really targeting 100,000 clients at 5 seconds between messages, that comes to 20,000 messages per second. That's a lot; plan for a load balanced server cluster.

How can I improve the response time of the user interface?

I'm after some tips on how to improve the response time to mouse clicks on a VI front panel.
I have data acquistion application which used to run fine, but after spending a couple of weeks making a whole bunch of changes to it I find that the user interface has become a bit sluggish.
My main GUI VI has a while loop running 16 times a second, updating some waveform charts and polling about a dozen buttons on the front panel.
There is sometimes a delay (variable, but up to 2 seconds sometimes) from when I click on a button to when it becomes depressed. I have wired the iteration terminal of the while loop to an indicator on the front panel and can see that the while loop is ticking over during the delayed response to the mouse click, so I know that the problem is not that the whole program is running slow, just the response to mouse clicks.
Also, just for debugging purposes, I have indicators of the iterations of all the main while loops in my program on the front panel, so I can see that there are no loops running abnormally fast either.
One thing I've tried is to turn off multi-threading, and this does seem to work - the response to mouse clicks is much faster. However, it has the side effect of making the main GUI while loop run less evenly. I was trying to get a fairly smooth waveform scrolling across the screen, and when multi-threading is off it gets a bit jerky.
Any other suggestion welcome..
(I am using LabVIEW 7.1, Windows 2000).
Regards,
Mark.

Hi Altenbach,
Thanks for your reply. In answer to your questions:
I am doing both DAQ board and serial data acquisition. I am using NIDAQ traditional for the DAQ board, and VISA for the serial. I have other similar versions of this program that do only DAQ board, or only serial, and these work fine. It was only when I combined them both into the same program that I ran into problems.
The multiple while loops are actually in separate VIs. I have one VI that acquires data from the DAQ card, another VI that acquires data from the serial port, another VI that processes the data and saves to file, and another VI, the GUI VI, that displays the data in graphs and charts. The data is transferred betwen the VIs via LV2 globals.
The GUI VI is a bit more complicated than I first mentioned. It has tab control, with 4 waveform charts on one page, 4 waveform graphs on another page, and 3 waveform graphs on another page. The charts have a history length of 2560, and 16 data points are added 16 times a second. The wavefom graphs are only updated once per minute.
I don't use the value property at all, but I do use lots of property nodes for changing the properties of the graphs and charts e.g. changing plot colours, Y scale range etc. There is only one local variable (for the Tab control). All the graphs and charts have data wired directly to their terminals.
I haven't done any profiling yet.
I am building arrays in uninitialised shift registers, but this is all well under control. As the experiement goes on, more data is collected and stored, and so the memory usage does gradually increase, but only to the extent that I would expect.
The CPU usage is 100%, but I thought this was always the case when using NIDAQ with DAQ cards. Or am I wrong about this? (As a side note, I am using NIDAQ traditional, but would NIDAQmx be better?)
Execution priority of the GUI vi (and all the other VIs for that matter) is set to normal.
The program is a bit large to post here, and I'm not sure if my company would be happy for me to publicise it anyway, so I suspect that this is turning into one of those questions that are going to be impossible to answer.
Just as a more general question, why would turning off multi-threading improve the user interface response?
Thanks,
Mark.

Can I use the Fedex shipment release form?

My iPad shipped via FedEx. But I'll be at work when it gets here. Can I use Fedex's shipment release authorization form? Will Apple and the Fedex driver respect it in this instance?

Terms and Conditions
I understand that Apple requires signatures acknowledging receipt of delivered goods. By signing the Shipment Release Authorization form, I hereby authorize Apple's carrier to leave my package at the address I have specified for delivery when placing my order. I understand that, in so doing, I assume the risk of any loss, theft, or destruction, and release Apple and its carriers from all liability that may result from, leaving the package where I have indicated on the Shipment Release Authorization form

Can i redirect the responses to my form

Similar Messages

Maybe you are looking for