Can I Reformat windows 10 after upgrading my laptop to windows 10?
My Laptop model is lenovo G40-70 with a preinstalled OS of windows 8.1. My Laptop comes with a factory reset option. How do I do that in Windows 10 or do I need to clean install? And Where can I download the Windows 10 iso? Lastly How can It determine if my Windows 10 is genuine after clean installing? I havent yet upgraded to Windows 10 because I'm afraid I might not be able to reformat/reset my laptop to factory settings.
Hello,
I would suggest making a backup of the G40-70, and testing that backup to verify it works. If there is an option to create factory recovery media for the Windows 8.1 installation the laptop came with, you can try that as well. Once you have verified you can backup and restore Windows 8.1 on the laptop, go ahead with the Windows 10 upgrade process.
After you have successfully upgraded the existing installation of Windows 8.1 to Windows 10 on the G40-70, you will be able to download the Windows 10 ISO from http://www.microsoft.com/en-us/software-download/windows10 and perform a clean install of it.
Regards,
Aryeh Goretsky
Similar Messages
-
I just upgraded my laptop from windows 7 to windows 8.1 and did not realise I had to deactivate and reload Acrobat 9. Any suggestions about what I can do to get Acrobat 9 back and working?
Hi Jon,
Were you using Acrobat IX standard or pro version? Is Acrobat currently installed on your system?
You can download Acrobat using one of these Links:
https://files.acrobat.com/a/preview/1677e343-25c3-409b-a89b-d324552e07ce - Acrobat IX Standard
https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html - Acrobat IX Pro
Please revert back if you face any challenges after Downloading and installing Acrobat IX.
Regards,
Rahul -
HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7
My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium. This upgrade actually required saving files and a fresh install of Windows 7. When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found". They say it's an issue that HP will need to help resolve. Can anyone help?
This question was solved.
View Solution.Thank you very much for your help. I will look into the two options you gave me.
-
I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accountsStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
Can't launch color after upgrading to OS 10.5
I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?
Click here and follow the instructions.
(46092) -
Can´t open LR after upgrade to 5.3 without entering a licens key
Can´t open LR after upgrade to 5.3 without entering a licens key
I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.
-
Can't open Pages after upgrading to snow leopard on 10.6.8
Can't open Pages after upgrading to snow leopard on 10.6.8
Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.
-
I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
Stuck in a "loop" at the login window after upgrading to Leopard
I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
AppleIf Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim -
I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
When it was unstable, I found three strange condition
1. A lot of log looks like this
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
2. Internal Temperature was showed "sensor failed"
3. CPU User load is Zero
Anybody can tell me what wrong with the wireless controller ?Could be a hardware failure.
-
I can't load modules after upgrade
I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
What can I do now?You were right robot5x. After command lilo I have got modules loaded properly.Thanks.
-
I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
Can't find photos after upgrading to Windows 7
Bridge was working fine in Vista but after upgrading to Windows 7, I cannot find any of my photo files with bridge. Photoshop CS4 find them OK and so does Lightroom but for some reason Bridge does not list them under Folders. If I click on Libraries it says "no files". It does not list Pictures or My Pictures. I am totally stumped.
If I am in Photoshop
and go File>Open I get a list:
Recent Places
Desktop
Libraries
Computer
Network
I click on Libraries and get a list:
Documents
Pictures
Music
Videos
I click on Pictures and that is where all my picture files are stored (Used to be My Pictures in XP)
This also works in Lightroom if I Click on Import/Choose Files
Howeve,r from within Bridge, if I click on Libraries it says "No items to Display"
Also,within Bridge, If I click on the Files menu, the work Open is grayed out. -
I can't update packages after upgrading pacman to 4.0.3
I know this was already treated broadly about two months ago, but I can't update after upgrading pacman because of continuous problems with certain signatures (at least one).
I have already tried this:
rm -rf /etc/pacman.d/gnupg
pacman -Scc
pacman-key --init
pacman-key --populate archlinux
But I still get this error when trying to upgrade the system:
error: virtuoso: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
Could anybody help me? I'm pretty devastated with this.
Thanks!
My /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by [DoodoM] (2012-08-03 23:39:56)Thanks everyone! I guess it was a faulty mirror.
I also had problems upgrading glibc because /lib had to be linked to /usr/lib, but I fixed it seeking for helpful tips on the forum. What I did was move everything from /lib to /usr/lib, shutdown, start adding break=postmount to kernel line, mount the filesystem, remove /lib folder, link /usr/lib to /lib and reboot. Then I reinstalled glibc and everything went well.
Now some fonts look half-cutted in Gnome Shell when the window or panel which contains them is in background and I don't know why. But it is not the first time I have "graphical artifacts" with Arch Linux on this laptop. I think has something to do with the compositing. -
Can't open project after upgrade
Hi
After upgrading from iMovie 9 to iMovie 11, i have a project that i can't open any more. When i choose it in the project library the preview window freezes and the "edit project" button fades out so that I can't open it.
Any one else got the same problem or know how to fix it.Hi I have the same problem. Did you manage to find a solution?
Thanks
Maybe you are looking for
-
Error in installing Experience Manager.
Hi all, I have installed - 1)MDEX 2)Platform Services 3)CAS 4)Document Converter. 5)Deployment Template. 6)Oracle Endeca Guided Search 2.1.2 for Microsoft Windows x64 (64-bit) V31161-01 Everything is installed in a single local machine.The Endec
-
I have problems Installing OS Lion
I just downloaded Lion OS X...and when they ask me to choose the hard drive to install it...it shows my hard drivein the list... but I can not select it...and I can't go further...and it says that my iMac Hard Drive is used like a time machine...I on
-
Set Appleworks to save as .doc by default?
Hi, is there a way to set Appleworks word processing to save as .doc format and spreadsheets to save as .xls by default? (without having to set the save-as file type manually) Is it illegal for MS Office competing products to do this (ex. Mellel, App
-
When I try to use the components provided by SUN jsf ri, I always have a question: Can I use modelReference here and what the modelReference means to this component ? look at following components: UISelectItem, UISelectItems, UIForm, UICommand, UIGra
-
My Ipad is completely dead so I cannot open to determine serial number. When I call into support center they want erial number but when I try alternate means it says locked passcode. Will not synch . How can I get help