Can I reimage an external hard drive that is in the windows NT file format?

can I reimage an external hard drive that is in the windows NT file format?

With WinClone 3.x $20 for Mac or with Windows imaging - built into Windows.
Some like Acronis didn't (may now) work on Macs. Many use a linux CD recovery boot..
You can write to NTFS with a simple NTFS driver. There, I strongly recommend Paragon for OS X
www.paragon-software.com
They also have all the program and Apple Boot Camp support
Image a system or image a hard drive or.... ?

Similar Messages

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

If this hard drive is part of a NAS device, then yes it should be accessable from either a Mac or PC while connected to the AirPort Extreme Base Station (AEBS) by Ethernet.

How can I use an external hard drive that says it's for pc?

HI,
I just ordered an external hard drive that said it would work with Macs. ON the box, it says for Pc's only. Is there a way to have it work with macbookpro?
Thanks

Does the macbook detect the HD in finder? If it does then you can go to DISK UTILITY and select it on the left panel side of DISK utility and go to ERASE. Select Exfat or Fat 32 format if you need to go in between MAC OSX and Windows 7. (Exfat is not supported on all machines running XP) Click the erase when you have the correct format and it should work.
If you can't detect the HD on your mac then you need to format it on a Windows machine to FAT 32 then you should be able to read it.
Your still using leopard? do you happen to have a PPC?

While starting my iMac after new hard drive installed, I created a admin user, I then pulled over a backup from an external hard drive that brought over the previous admin user settings. Need to merge to old user with the new user

I had to replace the hard drive in my iMac. Upon initial start up, I created a admin user name and password. Then I connected a WD external hard drive that had a back up of my orginal HD. Upon running Migration Assistant and pulling over the back up I found it pulled over the ORIGINAL user & security information from the original hard drive. In order to see iPhoto or iTunes libraies I must sign on to the "Old" user.
I want to Merge old and new users into only 1 user or delete the original user however need to have the iPhoto/iTunes libraies accessable by the "New" user.

Your best bet is to start over, by restoring your entire system to the exact condition it was in. Otherwise, the transferred user account probably won't have permission to its backups. See the pink box in Problems after using Migration Assistant for an explanation.
See Time Machine - Frequently Asked Question #14 for details on how to do the restore.

Will my external hard drive be recognized on the Windows side of my Mac?

I have a 2009 white Macbook 13-inch running Leopard and fairly recently used Boot Camp to install Windows 7. Unfortunately I made the Windows side too small and I am now considering using an external hard drive to download all of my files I need for work. I have a few questions...
1) Is this a possible solution to my problem of no space on my Windows hard drive? and
2) I read something about my computer not having HFS read support since I didn't upgrade to Snow Leopard or install the Bootcamp driver upgrades (because it is my understanding they require SL). Will my external hard drive even be recognized by Windows? If not, can I upgrade to SL now and install the Boot Camp drivers before I try to use my external hard drive?
I just really want to do things right this time, since I'm already screwed with the partition size (there is NO WAY I am restoring the partition and reinstalling Windows 7) and I had a lot of hassles with Windows software when I first attempted Boot Camp. Any help would be great! Thank you very much.

Hey there Natasha1608,
It sounds like you need to transfer your library that is on your phone to your computer, and point iTunes to your other iTunes library. For the first, you can transfer your iTunes Store purchases to your library with the following article:
iTunes Store: Transfer purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Keep this in mind from the above article:
This feature works only for audio, video, and apps that you purchased from the iTunes Store. Any items that you imported from audio CDs or acquired from other sources won't copy from your device to the iTunes library. However, copies of all PDFs and books from your device's iBooks app will transfer to the computer, regardless of whether they were purchased from the iBooks Store. Learn more about transferring media to your iTunes library.
To point iTunes to another library, use this article:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Cheers,
Sterling

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

External Hard Drive that Both OS and Windows can use

I just bought a MacBook Pro for my son @ college. I've installed bootcamp because we have a large volume of windows software. (I also like the features of the Apple).
I'm trying to make this as bulletproof as I can (since I won't be around to act as tech support. I have an external hard drive (160 G firewire) that I'd like to set up so i can back both systems up.
How do I do that? I know one system uses NTSF and the other Fat 32(?)

Should I partition the external hard drive?

Mavericks 10.9.4 can't read my external hard drive which worked before the update

My external hard drives worked perfectly (paragon NTFS for Mac) with Mavericks after I updated it to the last version.
One more problem...wi-fi is not steady, connect and disconnect all the time.
Thank you for your help

Does it show up in disk utility?

How can I convince my external hard drive that it is no longer too full?

I have tried the various suggestions listed for similar problems, but i keep getting the message that the backup failed. I deleted old backups, and now I see only 2 backups, but it still reads only 36 gb available, 'needs140 gb for backup'. I don't understand a great deal about the process, but I have also followed the directions to use Disk Utility and have verirfied and repaired with no success. I have disconnected and reconnected the hard drive.
Simple instructions will be most helpful, as I am an entry-level fixer ;-)
Thanks...

Check Pondini's troubleshooting page for a solution http://pondini.org/TM/Troubleshooting.html

Can I access an external hard drive that is attached to my wireless network/router?

Ok, so after a couple deployments and time in the military, my collection of movies and tv shows has grown to crazy amounts. Being married, I want to access all these files on the home tv. I have all my movies onto one hard drive. That hard drive is attached to a Belkin N600 router. The router is then attached to the ATT U-Verse. My question, is how do I access the movies on the hard drive? I plan on playing them through the HDMI adapter on my iPad. I have tried File Browser and File Manager. So what are my options now? I feel like its close, but just barely out of my reach to get it all set up.

First off you will only be able to acess the content on the drive when you are at home where the drive is. To access them you need to add them to iTunes on your computer then access them on the iPad though the Home Sharing service.
I would skip trying to play them though the iPad though. You will make your life a lot eaiser if you spend the $100 and just buy AppleTV. It will make this MUCH eaiser. As well as give you access to your music, photos, etc.
Also as I am writing this I just realized if you have upgraded to iOS7 your iPad will probably not be able to play those movies. iOS apprenlty will only play video purchased from iTunes. It will not even play videos recorded by iOS6.

I can not see my external hard drive that is hooked to my airport extreme

I have hooked my iOmega 1tb hard drive to my airport extreme but can not see it on my macbook pro. need help to set this up

This is unsupported by Apple. You must configure Airport Utility to turn enable File Sharing of the drive in Sharing preferences and in the AEBS configuration. Then you have to "mount" the drive on your Desktop by selecting Connect To Server from the Finder's Go menu.

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

Hello Sandra,
The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
Mac OS X 10.6: Recovering items using Time Machine and Spotlight
http://support.apple.com/kb/PH6379
Sincerely,
Allen

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that? Looking for a solution that keeps me from re-ripping my CD collection.

Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao.

Can I reimage an external hard drive that is in the windows NT file format?

Similar Messages

Maybe you are looking for