Can I remotely turn the ringer volume on so I can find my phone?

Can I remotely turn the ringer volume back on, so I can find my phone using the "find my phone" ap?  It's nearby, but I don't know where. I think I have an iphone 4???

Thank you so much.  I did that, and didn't hear it, but when you said it will work even if the ringer is turned off, I did it again, and went outside, and it had fallen out of my bag near my car. I was pretty sure it was in the house because I had already looked outside, but obviously, not where it was.
Thank you again!

Similar Messages

  • How can I adjust just the ringer volume on an iPhone 4s

    I have the ringer turned way up because I'm in a noisy work environment, but that also increases the volume for the key click, game sounds, etc.  is there a way to only affect the ringer volume?

    An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

  • When I receive a call it won't allow me to hear the person on the other line unless I put my headphones in or use the speaker function. And when I turn the ringer volume up/down it is in maximum

    when i recevie a call it won`t allow me to hear normally

    There is nothing to input because your licensing system isn't functional. Reinstall the software properly using the full suite installer, not some obscure single app installers or whatever you mean by "backup".
    Download CS3 products
    Mylenium

  • Is there an app that can control the ringer volume by the time of day?

    Is there an app that can control the ringer volume by the time of day. Like say i had work. Is there an app that can automaticly change the ringer volume on certain days at times you input to lower the ringer volume?

    Can a app like this be made or will apple not allow it?

  • TS4006 How can I remotely turn on the find my iPhone feature on my phone

    How can I remotely turn on find my iPhone feature

    You cannot...you must be on the iPhone to turn it on, there are not those kinds of remote controls.

  • HT2188 Although the ringer volume for the phone is turned up, no ring tone happens when the phone is called.

    Although the ringer volume for the phone is turned up, no ring tone happens when the phone is called.

    Not a silly question...I not only didn't realize that switch was there but I must have touched/changed it today without feeling it.
    Thanks!

  • Can the ring volume be set without the system volume

    I hope this isn't too daft but is it possible to set the ring volume separately from the system volume? I need to run my iPhone very quietly but do not want to miss incoming calls!
    Cheers

    Your volume switches work differently depending on what you are doing. You may get a readout above the "speaker" symbol that appears on the screen telling you what volume is being adjusted.
    If you are not using anything, the volume switches adjust the ringer volume.
    If you are playing music or video, they adjust the music/video volume.
    If your headphones are plugged in, they adjust the headset volume.
    If you are actually on a call, they adjust the earpiece volume or speakerphone volume, whichever you are using (without a readout).
    If you are on a phone call using bluetooth, they adjust the bluetooth volume.

  • I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

    I want to increase the ringer volume but not the background volume (ie texts, emails, etc)

    nigelb999 wrote:
    Can anyone shed some light as to why it's not possible to adjust the ringer volume at the lock screen? Even though it's possible to adjust the volume during music playback and responses from Siri, etc.
    Cannot answer that question. That is a decision made by Apple.
    nigelb999 wrote:
    If there was a profile app available in the app store that allowed me to automatically set different volume levels at different times of the day it would be great - particularly if the app didn't require me to jailbreak the phone.
    There would not be an app like that, as they would not have access to the API. You can provide feedback to Apple if you would like to see this enhancement at http://www.apple.com/feedback and click on the appropriate link.

  • Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

    With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons. 
    When someone calls/texts there is no sound coming from the speaker.
    The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings.  So i know that the speaker does work
    Headphone jack seems clean and dust free
    I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
    When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
    If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

    I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
    Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
    Where as these keys are also working ok  in music player of iphone for IOS 7, the only problem is for ringing.

  • HT204407 How Can i remotely turn on find my iPhone app

    How Can i remotely turn on find my iPhone app

    Thank you. Not the answer I was hoping for though, but I appreciate your response

  • Why can't I turn the HDR on in the camera settings?

    Hi everybody. I want to turn the HDR to on in the camera , but I couldn't . I tapped on the HDR to turn it on but it doesn't. Why?
    I'm using the manual settings on my camera. The settings are : Flash off - Resolution 15.5MP(16:9) - Self-timer  off  -  Smile Shutter  off  -  Focus mode  Touch focus  -  HDR  is off and won't turn on  -  ISO  Auto   -  Metering  Center   -  Image stabilizer  off   -  Preview  3  seconds   
    Quick launch  Launch only   -   Geotagging  off   -   Touch capture  off   -  Use Volum key as  Zoom  -  Sound  on   -  Data storage  SD card  -  Touch Block  deactivated. .   These are my manual settings for the camera . Why can't I turn the HDR Mode to ON? Anybody has any idea? 
    Thanks a lot.
    Solved!
    Go to Solution.

    Hi Prodigy1,
    There is a limit of 8 megapixel, because the Exmor RS lowlight capabilities are optimized around this resolution. So change the resolution to 8MP or lower and it should work. 
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Any way to avoid adjusting the ring volume?

    Any way to avoid adjusting the ring volume? Don't know how but after using the phone for a day or two, the ring volume is adjusted. Is it because I adjust the volume of iPod or other apps. Is there a way to fix the ring volume at a constant level and won't be changed until actually changing the ring volume setting itself?
    Anyone?
    Thanks
    Gaston

    The ring volume is seperate from the iPod or 3rd party apps volume. You can have these at seperate levels. As a test, I made sure the ringer volume is at 100%. I started playing a song and lowered the iPod volume to 50%. I stopped the song and checked the ringer volume which remained at 100%.
    There is no lock setting for this. If you adjust the volume when not using the iPod or when not playing a 3rd party app, it will adjust the ringer volume.

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

    I I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

    You may refer to the web below for the upgrade steps.
    http://event.msi.com/2013/win8-1/Update.html
    After you finished the upgrade, try to update your intel/nvidia driver.

  • Fix the Ringer Volume or buy the X back !!!!

    http://community.vzw.com/message/222412#222412
    Fix the Ringer Volume or buy the X back
    All right enough of were fixing the issue in a future update
    Issue a patch to 2.1 to resolve this issue or admit this is a hardware issue and start replacing or refunding which ever works best for each individual case!!!!!!
    I don't won't to here 2.2 will remedy the issue until then what do i tell my clients  that can't reach me because i don't have dog ears to hear with.
    I have done every work around possible i even copied some of my wifes ringtones from her Droid 2  does not make any difference ( the droid 2 is extremely loud ).
    So give us an answer not Lip service.
    This is a shame this device is close to excellent this is the only issue i am having and it is a Major Issue. we are starting on two months since release on a device that was designed with 2.2 in mind, Both the droid and Droid 2 have had 2.2 and also a patchs to remedy their issues give it to us straight were big boys and girls.
    Don't just read this post respond so verizon and Moto knows we are serious

    ghamden wrote:
    http://community.vzw.com/message/222412#222412
    Fix the Ringer Volume or buy the X back
    Hey, Dude, sell it to me already. I'll give you the $200.00 for it, or whatever it is that you paid for the phone, hopefully not the full retail price. My girlfriend wants one really badly, but none of my 3 lines are elgible for an upgrade until next summer. And we will be happy to patiently wait for the Froyo update, as well as Moto's own update to repair the volume issue.
    I'm not kidding....
    Geri O

Maybe you are looking for

  • How to use a parameter passed to stored procedure in cursor?

    I am rather new to Oracle stored procedures and I'm sure that this is rather simple. Could someone tell me how to do the following: I would like to pass the variable status into my stored procedure and then use it in the where clause when defining my

  • Can't execute net use with CF9

    On our win 2003 dev server we cfexecute a batch file which in turn calls another batch file, CONNECT.COM  which temporarily connects to each of our production servers so that we can copy new files over to production using BeyondCompare. This has been

  • Created below function (program units) in report builder

    hi all, I created below function (program units) in report builder and added two insert statements to know how much time it is taking to execute.Report is executing successfully but no rows inserted into tale testtime. Is there any other way to know

  • Flash animation into dreamweaver

    hey everyone, i'm new at both flash and dreamweaver and currently have a project combining the two together and i really cant work it out (i'm even using html instead of css haha) :/ Anyway, what i want to do is have a zipper (as in a zipper on ones

  • Help importing PNG sequence

    So I believe I have successfully accomplished importing PNG sequences before more than once. However, this time around, I'm losing my mind. I just successfully rendered a PNG sequence out of Adobe After Effects CS3, roughly 130 images, and I'm attemp