Can I remove these Toshiba programs from my NB305?

Like many other people, I've been disappointed with the molasses-slow behavior of my NB305 netbook. It's slow in every respect: startup, shutdown, opening programs, running programs, etc. Everything takes much longer than it should. I know that the underpowered processor is the main culprit, and there's not much I can do about that. Adding memory did not help at all. I'm trying to figure out whether I can improve performance even a little by getting rid of all or most of the programs Toshiba loaded on to this underpowered paperweight. In particular, I'm wondering which programs I need to keep, if any. I don't want to get rid of something I truly need, but I suspect that most of the following don't fall into that category (the list comes from Revo Uninstaller's list of installed programs):
TOSHIBA Assist
TOSHIBA ConfigFree
TOSHIBA eco Utility
TOSHIBA Flash Cards Support Utility
TOSHIBA Hardware Setup
TOSHIBA HDD Protection
TOSHIBA SSD Alert
TOSHIBA Media Controller
TOSHIBA PC Health Monitor
TOSHIBA Quality Application
TOSHIBA Recovery Media Creator
TOSHIBA ReelTime
TOSHIBA Supervisor Password
TOSHIBA USB Sleep and Charge Utility
TOSHIBA Value Added Package
TOSHIBA Web Camera Application
Thanks in advance for your help.

THIS Support Bulletin explains what they are all for. You decide but definitely listen to Peter's advice.
C .B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

I can't remove a spyware program from my Thinkpad G40, even after using the factory reinstall

Hello,
Is it me or is this in German? I recently discovered a spy-ware program that had escaped detection for months. When I tried to remove it critical files disappeared. I am running Windows XP pro. I also found a program Supportable Agent-en which I could not uninstall. I did find a way to erase some of the programs files, but the, you guessed it, windows would not load. I followed the instructions for returning the O.S. to factory condition, which is supposed to erase the hard drive, but when the process was done the program was still there. I attempted the reinstall several times and observed that right at the end of the program installment phase, Support.com unzipped and installed itself. Of course I am not able to load any virus removal software. Can anyone explain what is happening and if there is anything that I can do to fix it? Thank you, Scott
Solved!
Go to Solution.

Scott
You can follow this method if you have the recovery cds with you.Use Lenovo's secure data disposal and wipe the entire HDD clean, then use your discs to restore to the default factory settings.
http://www-307.ibm.com/pc/support/site.wss/TVAN-SDD.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

I cannot install the latest version of itunes as I have old versions of bonjour and quicktime. I can't remove these programs either. Help please as I have tried almost everything I have found so far on the the web.

I cannot install the latest version of itunes as I have old versions of bonjour and quicktime. I can't remove these programs either. Help please as I have tried almost everything I have found so far on the the web.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour and QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

How can I remove the blocked contacts from skype h...

Peace be upon you
How can I remove the blocked contacts from skype home and all skype features?

I found this solution and it worked.
Paul B. Adams
Re: safari 6.0 flash problem (blocked plug in)
Jul 26, 2012 7:39 AM (in response to defconnect5)
I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
However, I did see two versions of Flash:
_Flash Player.plugin with old date
Flash Player.plugin with todays date
I deleted _Flash Player.plugin and this fixed the problem.

How can I remove the Demo Viewer from my MacBook?

How can I remove the Demo Viewer from my MacBook?

Drag it to the Trash.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

HT5622 How can I remove a credit card from my Itunes to not be charged

How can I remove a credit card from my Itunes so it is not charged

Changing your account information using a computer:
Open iTunes.
Choose Store > Sign In.
Enter your Apple ID and password, then click the Sign In button.
Choose Store > View My Account.
Enter your account password, and click the View Account button.
To update your email address, follow these instructions:
From the Apple Account Information page, click the Edit button to the right of your Apple ID.
Enter your new email address into the Email Address field.
Click the Done button.
To update your name, billing address, or payment information, follow these instructions:
From the Apple Account Information page, click the Edit Payment Information button.
Edit the information that you would like to change.Note: The payment methods that the iTunes Store accepts can be found in the payment type section. If you do not want a payment method on your account, select None in the payment type section.
Click the Done button once you've updated all of your information.

How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

Hi,
i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
hours of googling has turned up nothing...
System:
Macbook Pro 13 inch Mid 2009
Mac os: OSX Lion
Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

Alexander, I would like to apologize for the TERRIBLE answers you have been given so far. I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
I am a *nix user in general, and thus own a mac and a thinkpad. In fact I just got my thinkpad not too long ago. As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me. Ergo, I moved my Mac drive to my lenovo. On this drive I have a hybrid mbr which is no longer needed. So my thoughts are this:
From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems. This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space. For instance, fdisk or other MBR only partitioning systems. Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system.
If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually. The way I would recommend, is using gdisk (gpt fdisk). It is command line only, but the syntax is pretty easy:
$ sudo gdisk /dev/disk0
Assuming you are using your mac partition and your primary hdd is disk0. That will put you into an interactive session of gdisk. Enter "?" for command options. What you need is the "recovery and transformation" section which is the "r" I think. From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it). When it asks you for the partitions you would like to include, just hit enter. It should then ask you if you would like to create a protective entry for the remainder of the empty space. This is what you want so tell it to do that. After you are done, "w" will write and exit. You may want to first use the "p" to print and ensure that you have what you want. You can proabably check your work by using fdisk as so:
$ sudo fdisk -l /dev/disk0
I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread.
Cheers!
PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

Can't Remove Certain Font Families From "Font Book" 4.1

Having gone through my new 2013 iMac's "Font Book" files, and deleted those fonts that I don't feel are relivent for me, I stlll find the following OSX installed fonts not able to be removed from "Font Book" 4.1, under the "all fonts" and "computer" sidebar menu listing:
Can't remove these ten font families:
- Baoli SC
- Lantinghei SC
- Lantinghei TC
- Libian SC
- Wawati SC
- Wawati TC
- Weibei SC
- Weibei TC
- Xingkai SC
- Yuanti SC
I was able to remove/delete many fonts by simply using "command + mouse click" to bring up a pop-up menu window that gave me the option to "Remove (Font Name) Family".
In the ten fonts, listed above, the "Remove (Font Name) Family" selection is greyed out.
If I select the "Enable (Font Name) Family" in the pop-out options selection window, for each of the ten fonts above, I am presented with a "Font Book" top pop-up window ... indicating that the fonts have to be "Downloaded in Order to be Enabled".
Even if I get the ten fonts above, downloaded to "Font Book" 4.1 ... when I go back to the pop-out option window to remove the font family (not greyed out now), and select "Remove (Font Name) Family", the downloaded family fonts in that main folder are deleated, but the main folder is still there .... and can't be removed.
Even though the ten font families listed above have been turned "OFF" by me, or "disabled" ... is there some way to get these remaining font folders out of my "Font Book" 4.1 app window.
Any ides or thoughts?

DavidMac wrote:
It's kind of strange, since all of these remaining ten font families are "international" fonts, which you would assume Apple would allow an "English" font user to delete.
Apple is really not interested in helping users delete fonts. In iOS it's impossible to either add or remove them, and we can only hope OS X keeps what flexibility it currently has. In addition, Apple gets over 60% of its revenue from abroad, with China probably the major engine for future sales growth, so it has gone an extra mile to make the OS more attractive to Chinese users. This includes the ten font families which Apple prefers, probably for size reasons, to install only if the user wants them enabled, but has to keep the names present so the Chinese user will know he can have them if he wants them.
It's not totally clear to me why you want to remove things. Can't you just use the Collection column to keep the list you see limited to English or whatever?

I have downloaded Photoshop CC. Can I remove now Photoshop CS6 from my computer

I have downloaded Photoshop CC. Can I remove now Photoshop CS6 from my computer.

Hi there,
You can have both Adobe Photoshop CC and Adobe Photoshop CS6 on the same system and both will work fine.
In case you need to remove photoshop CS6 from your system, you will first have to deactivate it so save the activation count which you can use it for the future to reactivate.
Activation:
Make sure that your computer is connected to the Internet.
Start the application.
Choose Help > Deactivate and choose one of the following options.
Deactivate or Suspend Activation. These options deactivate the software but retain licensing information. Choose one of these options if you want to temporarily deactivate the software, and you're planning to activate on this computer again.
Deactivate permanently. This option deactivates the software and removes the licensing information from your computer. Enter the serial number again if you want to use the software on this computer.
Deactivation:
CS6: You log in with your Adobe ID to activate your software when you install it or within the first seven days of use. Follow the steps below.
Steps:
Make sure that your computer is connected to the Internet.
Start the application.
Choose Help > Activate. (If this option is dimmed, you've already activated your software)
Log in with your Adobe ID (usually your email address) to activate your software. If you don’t have an Adobe ID, you see an option to create one.
Optional (CS5 & earlier): After you activate, also register your Adobe product for faster and easier access to support and upgrades.
If you need the free download link for CS6, you can visit [ http://www.adobe.com/downloads/other-downloads.html ]
Thank you

I am new to mac. just purchaased it 3 weeks ag along with MS office for mac, i notice that all my outlook email are in this finder folder, can i delete these email files from this location? why are they there anyway?

I am new to mac. just purchaased it 3 weeks ag along with MS office for mac, i notice that all my outlook email are in this finder folder, can i delete these email files from this location? why are they there anyway?

Cherry63 wrote:
I am talking about the icon on the docking row, that's the guy with the smily face. When you click on him it brings up a bunch of files of what I seem to have store/created on my Imac. There are hundreds of emails and some other documents. I tried to delete a few of them when I first got the MS office but it did not like that, it said it have to rebuild oulook. Why cant i delete these files? is this Apple version of Window outlook PST files?
These file extenssions are listed as
olk14_message or even or ccontact. I wish I could send a screen print but I dont see that on the key board. Maybe I should have stuck with windows..
Oh the ...olk14_message's. Do not delete them behind Outlooks back, i.e., from the finder. Those are the various messages that you sent, received, or deleted in Outlook. They are indexed by Outlook so if you delete behind Outlook's back Outlook will get confused trying to access those messages.
You can delete them however using Outlook itself. In outlook select a mailbox (Drafts, Sent Items, Deleted Items, etc.) by clicking on the mailbox on the left. It will show you the messages in that mailbox. You can now select all or selected items in that mailbox. The click the Edit menu and select Delete. You will get a dialog asking if you really want to delete the selections. Answer "Delete" and the messages will get deleted.
The olk14_message's you are seeing are the actual messages shown the Outlook mail boxes. When you actually delete them the way I just described the corresponding olk14_message files will also be deleted.
Note Outlook's Deleted Items mailbox is where all deleted messages go when you click the Delete tool in the Outlook toolbar. Thus using the Delete tool from the toolbar does not permanently delete the messages. So if you been using that for months or years you are going to have a very large Deleted Items mailbox. And every one of those items in there is going to have a corresponding olk14_message file for that message.
So if those olk14_message files you are seeing are from the Deleted Items mailbox you can get rid of all those corresponding olk14_message files by selecting all the messages in Deleted Items and using the Edit menu's Delete.
Alternative ways to the Edit/Delete to do the permanent delete is select (all) the messages to delete and control (right) click to bring up the Outlook contextual menu and select Delete from it.
Finally if you use the Delete tool in the toolbar for messages selected in the Deleted Items mailbox you will be able to permanently delete those too. It's an exception since using the tool on the Deleted Items means there's no place to put those messages except to "oblivion".
So, in summary, using the Delete tool in the toolbar on messages in every mailbox except the Deleted Items mailbox just moves messages to the Deleted Items mailbox. But using the Delete tool on items in them Deleted Items mailbox permanently deletes the selected items in there. And only permanently deleting items removes the corresponding actual ...olk14_message files.

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Can't remove my credit card from account.

Why i can't remove my credit card from my account. when i remove credit card (select none)already after abt 5-10 min i check my account again my creditcardd will be appear. I try to remove from PC and on my iphone.

Answered here:
https://discussions.apple.com/message/24655077#24655077
So, either do as directed, or don't get anything from the iTunes/app store.

How can i remove credit card info from apple id?

How can i remove credit crad info from my apple id?

I tried to enter it as "none" but it didnt work. It keeps saying i need a card number and all that. But then, i clicked "same as shipping information" and just entered my name and all the adress stuff, put my credit card number as 0 and my security code as 0, put in a random date and clicked save.
-Just a tip for anyone else who couldnt figure it out like me

How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

How can I remove a mailbox address from the "From" drop down box in a new e-mail my old e-mail address continue to populate as the sender address

Hello,
Try Mail>Preferences>Accounts icon>Account Information tab>Click on the Outgoing SMTP server drop down, choose edit Server list, highlight the old one & click Remove.
(Such convolution is worthy of Windows® in my estimation)

FNDLOAD: How to remove a concurrent program from a request group

Hi,
I want to remove a concurrent program from a request group using FNDLOAD utility. Since impacted environment is Production (controlled environment) I do not want to remove concurrent program manually from the request group. Is there a way to use FNDLOAD utility for this purpose or some other means?
Environment: Oracle EBS R12.1.1
OS: Linux
Thanks,
Nitin

Hi,
Unfortunately this CP cannot be disabled as it has to be removed from certain RGs but not all. Also removing it through RG forms is always an option but production gatekeepers won't allow to do that. I would have done that in a min.
If FNDLOAD is not an option then I guess only other option is pl/sql script.
Best regards,
Nitin

Can I remove these Toshiba programs from my NB305?

Similar Messages

Maybe you are looking for