Can I rename a work center?

Hi,
We have a client requirement to rename 'Opportunities' work center as 'Non Trade Opportunities'. Can we achieve this through PDI or Adapt mode?
If we rename the work center then 'Opportunities' should be replaced with 'Non Trade Opportunities' everywhere (in TI, OWL, search defau tset) etc.
Please provide an update.
Thanks,
Ambuja

Hello Ambuja,
You can rename
Work Center
Open the WCF file in the UI Designer
Mark the "OberonCenterStructure"
That 's the left top area with the icon
Adapt the "Title" text
Work Center View
Open the WCView file in the UI Designer
Mark the "Identification Region"
That 's the top mos area
Adapt the "WindowTitle" text
HTH,
Horst

Similar Messages

Renaming of Work Center

Hello all:
I can rename a work center in ECC. However, this new name does not flow thru to APO. Does anyone know how to set things so if I rename the Work Center (this is the actual workcenter, not the description), it will change the Resource name in APO upon CIF? Or do I need to manually rename the Resource in APO?
Thanks.
Andrea

Hello Andrea,
You can't change manually the work center name in APO.
Unfortunately if you change the name in ECC the APO system is not updated. So, you have to delete WC from APO, then you change the name in ECC and you have to transfer again the WC on APO side.
To be able to delete the work center in APO you have to delete first all others objects tied to your WC (Pl.Orders, PDSs, etc.). With Where Used you can find all information's tied to the work center.
Hope that can help you.
Thanks.
Regards, Marius

How Can i Block the Work Center Once is used in Maintainence Order

Dear Experts,
How Can i Block the Work Center Once is used in Maintainence Order in PM module.
In standard its not blocking the Work Center automatically. How this can be achieved.
Regards
Raghu
Edited by: raghu m on Apr 21, 2009 10:36 AM

Hi Muthukumar,
1. You can using the user exit or BADI to control this.
CONFPP01            PP order conf.: Determine customer specific default values
CONFPP02            PP order conf.: Customer specific input checks 1
CONFPP03            PP order conf.: Cust. specific check after op. selection
CONFPP04            PP order conf.: Customer specific input checks 2
CONFPP05            PP order conf.: Customer specific enhancements when saving
CONFPP06            PP Order Confirmations: Actual Data Transfer
CONFPP07            Single Screen Entry: Inclusion of User-Defined Subscreens
BADI
WORKORDER_CONFIRM
the above are the user exits that are available fro the CO11N tcode.
2. we have to take a help of the abaper to write coding fort his.
3. The user exit should be called for the
Work Center : YYYYY
then check the relevant Work Center Once is used in open Maintainence Order and if it has a entry if then give a error message else allow the CO11N to perform.
Regards,
Sankaran

Where can i find Main work center field value in il03 transaction ??

Hi experts,
Where can i find Main work center field value in il03 transaction.
Iam looking for the table from where that value will be filled.
thanks
Suresh

Hi anji reddy,
No that filed is not avaiable in that . can please tell some other soulution ...
ASAP...
thanks,
Suresh

Work Center Rename

Dear Experts ,
Is there option in SAP to rename the Work Center ?
If Yes, How ?
Please help
Best Regards
Keerthan Kumar

Keerthan Kumar,
Use transactions IR02 or CR02.
Enter the WC details on the initial screen, then select the following menu: Work Centre->Rename
PeteA

How do I create a new Work Center for the transaction launcher and links

Hi
The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
Regards
Declan

Hi Robert,
Thanks again for taking the time to reply.
Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
Is this correct?
Cheers
Declan

Link for Cost Center And Work Center.

Dear Experts,
Can you Provide me the Link for Cost Center And Work Center.
Regads,
Jyoshna

Dear Experts,
I got the answer for the Link Between Cost Center And Work Center.
By using CR03 T Code we can see the Display Work Center : Cost Center Assignment Screen will appear.
we need to select the costing tab, We can find Cost Center .
Thanks & Regards
Jyoshna

Work Center Capacity Intervals

HI,
Where can I get the work center capacity interval dates i.e. valid from, valid to and corresponding week days that are being populated in the table control when you follow the following path in transaction IR03->Enter Work Center and Plant-> Press Enter->Go to Capacity Tab-> Press Capacity Button on the lower left hand corner->Press Intervals and shifts
My requirement is to calculate the weekly capacity of a work center. I have to find the valid interval for current date then find the number of working days in this interval so that I can use it in calculating the weekly capacity.
Regards,
Bharat.

I de-bugged the main program behind IR03 and found out that the Valid-from-date is being calculated during runtime for all the records from table KAPA for given work center KAPID.
Anyway thank you all who cared to check the thread.
Regards,
Bharat.

Regarding Work Center Capacities

Dear Exprts,
How many Capacity Categories Can we maintain in Work center.
Regards,
MANOJ

Dear Manoj,
How many Capacity Categories Can we maintain in Work center.
One can maintain any no of Capacity Categories in the work center, provided that you have actually defined/maintained
that no of Capacity categories in customizing.
So while creating work center you can have capacity categories like machine, person, processing unit, lab etc. as per requirements.
Revert back in case of query,
Thanks,
Sudhakar

Dummy work center.

While creating master recipe curling, edge forming, trimming and painting are assign to a single operation and a resource (work center)is assign to this operation in master recipe. Now my problem is that when I enter the scrap quantity during confirmation in COR6N painting material is consume for scrap quantity also.
I decided to create a dummy work center for painting and painting material to be assigned to next operation 40.frist advice me am I right and explain me how to create a dummy work center ,what about the cost center and activity types in costing view of work center .pl. give me detailed steps with T codes.

Hi,
You can create a dummy work center and assign to the same operation. This is the only way i think you can do it, Suppose it will be like this,
Operation 0030 Workcenter1
Operation 0030 Woekcenter2
then you can use same cost center, If you want to do costing then use the activity that you want to cost.
Pls refer this also,
[Example|http://help.sap.com/saphelp_nw04/helpdata/en/50/13a8946d7611d2a5a80060087a7a74/frameset.htm]
Regards,
R.Brahmankar

Blocking of work center capacity for capacity planning

How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?

Hi,
In capacity header details screen not exactly as "can be used for capacity evaluation " but
"relevent to finite sceduling"
"can be used for several operations"
"long term planning"
these all indicators you can deflag this and check the results ,it may helpful to you.

LSMW for Work center text

Hi Experts,
Im developing LSMW to upload the Work center text(TCode CA10).
I did tried on Direct input -> program /SAPDMC/SAP_LSMW_IMPORT_TEXTS in LSMW. The uploading process was done successfully but it can not be used in Master Recipe assignment(TCode C202). Reason due to the direct input program doesn't has Work center short text. FYI, the Work center short text is entered during the Work center text creation via CA10 first screen.
And i did tried on CA10 manually, work center text only can be used in TCode C202 when it is created with short text key in at CA10 first screen. While for the Work center text that created without short text key in, system will prompt error when i try to assign the Work center text into C202.
Thus, i may need you advice. In LSMW other that direct input,is there any BAPI or IDOC available for the Work center text upload?
Please comment.
Thanks in advance.

Hi SKK,
Thanks for you reply.
I did tried on FM SUBMISSION_PROCESSING, and found:
It is being trigger online, whereby i need to key in the text manually.
Since my requirement is mass upload, hence that is impossible for me to execute the FM to key in the text manually.
Do you know there is any other FM/BAPI/IDOC that can perform the Work center Short and Long text in background mode?
Please comment.

Dynamic work center assignment

Hi,
In our process for each process (operation) there are more than one physical work center.
The assignment of the order to each work center is decided only at the time of operation execution.
How can we map this scenario?
Can we change the work center during the confirmation at operation level?
Regards
Ramakanth

Dear Ramakanth,
1) Yes , when you enter order number & operation number, system will pick the work center
from Prd order in CO11N
2) Now just change the work center as required, system will not stop you
3) coming to costs, Variance will be calculated for changed work center
Regards
Madhu Kumar

Work center assignment HR - PS

Hi everyone
is there anything else to do to assign work center in HR except what I've already accomplished:
1. work centers have been created in CR01and customized in OP42
2. via T-Code PO01 I assigned a work center to a position (connection A!003).
What else should be done? How can I see the work center in organizational plan (PPOSE) besides Detailed description of an object???
Will PS team-members be able to observe my work center from HR in their T-Codes???
Best regards,
Eldar

HI,
you cannot see ur work center directly in the Org.Structure.Please use this report RHXSTR06 which will give the existing work centers that are assigned to ur Organization Unit.
Thanks and Regards
Swati

How to find work center in REM from the material Documnet number

Hi ,
We want to develop a Z report for the repetitive manufacturing cycle. Please let me know the logic how to get the work center from the material document that is posted after backflushing MFBF tranaction.
I will elaborate it little further. From the material document number that is genearted out of confirmation from that document no how can I find the work center so that we can so show the throughput of each work center.
Please avoid standard transaction of MCRP etc.
Thanks & regards

Dear Kumar,
I'm not sure whether you can get the work center details,but you can get the production version number from you can get the
rate routing details.
Give a try by passing the document no to table BLPP and get the document log number and pass on the document log number to
table BLPK,by which you can identify the production version.
Also give a try using this FM,RM_DISPLAY_AFRU_REM,I guess you can get the exact work center details from here.
check and revert back.
Regards
Mangalraj.S

Can I rename a work center?

Similar Messages

Maybe you are looking for