Can I rename my computer?
I have two MBPs a personal one and one from work. I am backing up to an external drive but I just realized they are both named the same. Can I rename one?
Thanks for your help.
Yes, from the Sharing pane of System Preferences.
(60970)
Similar Messages
-
Can't rename my computer and start new TM backup
Three techs at Apple have not been able to help me.
I have been backing up a PowerBook G4 and MacBook to a TC wirelessly, and now the MacBook BU stopped working but the PB continues OK. The sparsebundles are different sizes; PB 115 GB, MB 151 GB. After many gyrations with my MB sparsebundle, all unsuccessful, the tech suggested I start fresh with new computer name for my MB (the old name was firstname lastname's computer). So my new computer name is firstnameMacBook. After preparing to do a backup for more than an hour I get the error message "The backup disk image could not be mounted". Same error message I had when my MB BU stopped working. So a name change had no effect. Should I change the name of the existing old sparesbundle? Should I delete it? How? What?
What to do?
BruceSorry. I should have been clearer. I was just wondering if it was ok to do so.
I had taken my partners computer. Re-installed Leopard, then when I went to do the time machine backup it just started using the original sparse bundle that was technically my partners. I wasn't sure how to get it to start another and wanted to check first if it was ok the rename a sparse bundle?
For interest sake. I did rename the original bundle and this forced the Macbook to start a new sparse bundle.
I wanted to keep the original sparse bundle that was my partners in case we had any trouble with my partners new computer set up and migration.
Hope that all makes sense now.
Thanks -
How can I rename my computer?
I just got a new (used) G4 Dual-450 (Gigabit Ethernet) ((Man, I just love these machines!)).
This machine has Tiger pre-installed, and came without the install disks. I'm not sweating this, I'll get Leopard soon enough.
The problem is that the computer came pre-named with an awkwardly long name. I don't much like looking at it on the login screen and it is a Real Pain as the command prompt in the Terminal display.
How can I change the name of my new system to something like "Leo's Computer"?Gee, I'm surprised it was so easy!
I guess I shouldn't be, this IS a Mac, after all....
Thanks!
-L -
Can`t rename computer computer account is already exists
We have domain on 2 DC`s(1 is GC and the 2nd is DC(Server 2008r2 ent)), Sometimes we need to replace old computers to the new ones. But they have to to be named like the old ones. So sometimes after removing old comuter from the AD, we still have an error
message "Can`t rename, computer account is already exists" where else should we remove it????????Let's try the following:
- configure the other domain controller as a Global Catalog - this should be the case in a single-domain forest
- force the garbage collection by following http://blogs.technet.com/b/ad/archive/2009/03/24/taking-out-the-trash.aspx
Check the list of deleted objects again afterwards.
If this does not provide the resolution, restore the tombstone of one of the deleted computers (followhttp://technet.microsoft.com/en-us/magazine/2007.09.tombstones.aspx ),
rename it , and delete it
hth
Marcin
i`ve tried all of that except, configuring other Dc as GC, i ve found an article http://technet.microsoft.com/en-us/library/cc737269(v=ws.10).aspx it
says that nothing would happen if two DC`s will be GC`s, but it vad not been written that this article aplies to win2008r2 only to earliests OS`s, so i`m affraid if something wrong will happen if i will promote another DC to GC, or i`m wrong??!
I couldn`t force garbage collection, but i`ve enabled log as you said, and it seems to be no trouble with it....
about the restoring tombstone.... i ve stuck on the step when i should search the deleted object, because search result "getting 0 entries"
The same thing is about the article that Sandesh Dubey had linked "http://technet.microsoft.com/en-us/library/dd379509(v=ws.10).aspx"
if i am not wrong, i should go to Configuration in tree of ldp and then to the Deleted Objects, but it says that there is no children.
Please people be patience with me, i really am need your help! -
How can I rename my iPad 2?
How can I rename my iPad 2?
Connect the iPad to your computer and launch iTunes. Double click on the iPad's name on the left side of iTunes under the Devices heading -place your cursor in the name field - delete the old name and type the new name. Hit return on your keyboard.
-
Hi every body,
Now i have one problem about Premiere Pro CS4 would like to support from everyone.
Normally, all object is contented in Left side of Premiere and can rename only one click to object (for example click to Bin 03) but i couldn't rename them.
Some Project before i made, i can rename but when i make new, all can't rename.
I've already format all computer and install again CS4 but same problem.
So if someone know this problem, please help.
Thanks everybody first.
So please help me to solve this problem.right click on the bin and choose "rename" doesnt work ?
-
Can't rename files on an external harddrive,
I import my pictures into Lightroom using the following format YYYYMMDD - XXXX. For example, a picture with a file number 2113 taken on Dec 16th, 2011 would be ranamed 20111216 - 2113. I import them to my computer first and then move them to an external hard drive when the storage on my computer gets tight. For a while, I accidently was adding a space to the front of my file name, so it would import as " 20111216 - 2113" instead of "20111216 - 2113" notice the space at the beginning file name. This space was maintained when the file lived on my computer, but it was removed when I moved the lightroom folder to my external hard drive. As a result, all of the files that are on the external hard drive show up as "missing or deleted." Light room thinks there should be a space in the front, but none of the files on the hard drive do. I have to locate each and every file by hand, and the "find nearby photos" check box doesn't help, because all the files are missing the space. Is there a way to batch rename files in lightroom, even when the file is missing? I need to change all the names in my catalogue to take out the space at the front so I can then easily locate the files on my external hard drive. Can someone help me out? There has to be a better, faster, easier way to do this other than individually locating each and every file on my external hard drive.
Thanks for your help,
mattLightroom can't rename files while they're missing. If you batch rename the files on the external hard drive, to include the space again, LR should find them and then you can rename them within LR to remove the space again.
-
I have an iPod nano and an iPod touch that are both called "Ernie's iPod" in iTunes. Since the iPod touch is wireless, it's usually in the Devices list, and when I plug in the iPos nano to sync it, both appear -- and at can be confusing. Can I rename either or both of them?
Yes. When connected to the computer/iTunes, just click on the name under Devices and change the name like yu change a file name. If you have iOS 5, Yu can also go to Settings>General>About>Name and change the name.
-
Can't rename files on my mac?
i can't rename any files on my computer anywhere. i have tried switching the permissions as well to read and write but that doesn't work at all!
please helpSo describe the process you go through to rename a file. Step by step.
-
Can I change the COMPUTER NAME of Windows Server ?
Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^yYes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran -
How can I change my computer name
My work computer is named the previous person who had it who's not hear any more.
Now it says the name is: "his name - my name"
How can I change the name to just my name?
Thx,
StevenThanks Eric. I note a few differences though.
First there is no "Users & Groups" icon in the top level of System Prefs. However while exploring I found under "Sharing" you can change the computer's name there. One would think it's in Accounts, but it's not. I did add myself as an Admin when I first got here but that just appended my name with a hyphen to the previous employee name
So I changed Computer name to my name in the field in Sharing and then saw there's an Edit button. There you can change the lost hostname, whatever that is. I shouldn't do these things without knowing, I know, but I changed it but it doesn't allow spaces and adds hyphens. Since I have a Home comper, I named this work computer differently and hypens were added plus the suffix; .local.
There is a "Use dynamic global hostname checkbox which was unchecked so I left it that way. Do you know what the global hostname does and if I need to check it? What happens when you do?
Making the local hostname: my name-V1-Computer.Local, didn't change the Computer name field when you return to it. It still has the name I gave it before assigning the .local name.
But if I go into MM for example and then Advance to see which computers sync to MM, I see my home computer and work computer which is still named: previous emloyee's Computer - Steven Lastname (This Computer). So obviously the complete computer name hasn't changed.
The article you give above gets you to the Directory Utility in Utilities to change the Root info.
It says after open the lock icon: Enter an administrator account name and password, then click OK.
But the only thing to do in the main Directory Utility is: Add/configure a Directory server, again don't know what that does, but clicking it all you can do is set the drop down to: Open Directory or Active Directory, fill in the Server Name or IP Address field.
There are no fields for "enter admin account and pw" which I assume is me since I'm listed that way in Sys Prefs > Accounts, and the only Admin listed for this computer.
So I'm at an impasse. I don't see why this is all sy cryptic, but assume it's for security purposes. Well it's working. I can config my own computer
Am way of the beaten path? In a parallel universe? Or close?
Sorry for long email, but hopefully this will end up being a good tutorial for the next happless chap that can't rename his/her computer. -
Renaming 2000 Computer Problem
Hi,
I've had to rename my computer and now I can't access or start my database. I got the Error ORA-12545. I read in this forum about creating an alias for the computer name in the Hosts file. I did that and now I get the message that the database is currently down and log in as SysDBA and start the database. I try that and it does not work.
Would you please guide me in the right direction? I am using Oracle 8i
Thanks in advance,You need to provide a bit more information.
First, how does your internet connection get to your iMac? Is it direct from a cable or DSL modem? Is there a router in the network either built-in to the modem or a separate device? Do you have Internet Sharing turned on or just Sharing? Are you routing from the Ethernet port to the Airport on your iMac? How is the Airport connection setup in Network preferences? Do you have security disabled or enabled?
Have you been to the Airport Support site? Have you used your online Help - select Mac Help from the Finder's Help menu and search for 'airport' and 'sharing' to find relevant articles. -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Can not scan from computer, but can print
Since a few weeks I'm not able to scan anymore from my computer using HP Scan. I still can print from my computer. It doesn't matter if my computer is connected to my network by Wifi or by wire. My printer is connected to the network by wire.
Scanning wasn't a problem until some weeks ago. I don't know what change caused this situation.
The message that is displayed on the screen of my computer says 'HP LaserJet 200 colorMFP M276nw-AirPrint is is not available ...'. The reference to Airprint puzzles me.
Does anyone recognize this situation and / or has a solution?
This question was solved.
View Solution.Thanks for providing the screen shots Gvmdh_Hbl.
It still doesn't look like the full driver is installed for the printer. Your missing the Print and Scan tab on the Printers and Scanners window.
Here is a screen shot of what it should look like.
Repair the Disk Permissions and Reset the the Printing System to see if it helps.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
If you are still having issues, I would uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP LaserJet Pro 200 Color M276 Full Feature Software and Drivers.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
Maybe you are looking for
-
Problems trying to insert rows from PL/SQL procedure with existing seq..
hello. please help me. i have a button that is calling an anonymous PL/SQL block and i am struggling with inserting records automatically when this button is clicked. an ordinary before insert DB trigger is launched: reate or replace TRIGGER "SPECSYS
-
Livecycle Designer ES 8.2 Crashing When Trying to Add Elements
I've created a form and hit a roadblock. The form is 17 pages long and contains 151 elements. When attempting to add another element the application shows not responding and then eventually crashes. Worse yet, it corrupts the PDF. The byte count fo
-
PCA Manual Posting - Stopping posting to certain account
Dear experts, How can I stop usage of a certain account for manual PCA postings thru 9KE0. This is only for manual, the other transactions should be able to post. Any inputs, highly appreciated. Thanks
-
HOWTO deploy a JClient App in a 3tier Environment : Road Map needed.
I've a JClent App and I need to run it in a 3tier environment. I mean I need to have as less code as possible running onto the client, distributed via Web Start, and as much code as possible running onto the Application Server (OC4J) in orer to take
-
Inserting Multiple Records in Transparent Table
Hi Friends, I am New to ABAP and Previously i was in Web Dynpro Java.... I am doing an scenario Travel Request. The Problem i am facing i this scenario is inserting the data in the table. I have to maintain a custom table in which Travel request No (