Can i Repace My Main hard Drive with Western Dig 750GB Serial ATA/300 Hard

i have a Dual 2 GHz Power PC G5. it has the origional 160 or 180 in there.
is this a good drive?
just want to make sure i put the best drive as my main hard drive.
this drive is on sale.
thanks for your help
Message was edited by: synesthesian

If you want to use the ATA 300 drive at full speed you'll need to buy an ATA 300 Card, otherwise it
will only run at 150Mbps. It will still work but the throughput will be half since the Original G5 ata
controllers are serial ata 1 intead of the lastest version 2.
RealDave

Similar Messages

  • Photoshop CS5.1 suddenly can't save to main hard drive

    This is very strange.  In Photoshop I suddenly can't save files to the main hard drive on my mac mini.  I get the error "Could not save as [filename] because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders."  I can however save files to the secondary hard drive.  Other applications can save to the main hard drive just fine.
    As a test, in Photoshop I tried saving to the root of both drives.  I get the error only when attempting to save to the main hard drive.  I have checked the permissions of both drives and they are identical:  system R/W, wheel R/W, and everyone R/W.
    I have tried everything I can find on the message boards, but nothing works (disk repair, repair permissions, etc).  I have also reinstalled Photoshop and get the same error.
    any help much appreciated!
    thanks,
    JC

    The problem has resolved itself!
    All I did was reboot a few times in my attempts to get Command-R to work (I have a PC keyboard and the "option" and "command" keys are reversed until OS X boots).
    Oh, one other thing I did... I logged in as a different user and ran Photoshop and was able to save a file to the main hard drive.  Very strange because this guest user has less privilege than my normal login.
    JC

  • How can I replace my old print driver with my new printer driver on 13

    how can I replace my old print driver with my new print driver on photo elements 13

    The print driver is not installed in PSE.
    Check with the manufacturer of your printer.

  • Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

    Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
    My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
    Would an external 2tb My Passport Drive by Western Digital work for the backup?
    It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
    And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

    No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
    Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • Can I use a USB thumb drive with iPad

    Can I use a USB thumb drive with iPad2

    What do you want to do with the thumb drive?
    If for picture/movie files, You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?  The info seems to say that it's as easy as plugging the new drive into a drive slot?

    shldr2thewheel wrote:
    Fmaharg wrote:
    I am about to buy a new MacBook Pro, but want to try out the Serial Drive 7200rpm before taking the plunge to use the SSD....Can you upgrade a MacBookPro hard drive from a "750GB Serial ATA Drive @ 7200 rpm" to a Solid State Drive easily?
           Yes
    Fmaharg wrote:
    The info seems to say that it's as easy as plugging the new drive into a drive slot?
           It's easy, but not that easy.  You need to copy all the info from the drive currently in the mac to the new  one before you install the new SSD.  You can do          this by downloading cloning software (I use CarbonCopyCloner because it's free)
    Not to be picky but CCC is donationware, if you use it because of its quality you should send a little bit of money in appreciation, and as a bonus you get to turn the banner off.

  • Does anyone know where I can buy a 750GB Serial ATA Drive @ 7200 rpm for the new mac mini??

    There is a mac mini teardown for the new model at this site: http://www.ifixit.com/Teardown/Mac-Mini-Mid-2011-Teardown/6131/1. Here it says that the user can easily upgrade their own mac mini hard drive, but does any place sell a 750GB Serial ATA Drive @ 7200 rpm for mac mini that you know of???
    Thanks in advance.

    My source for hard drives has, for years, been newegg.com. They have good selection, good prices, and speedy delivery. Also, a broad selection of user comments. You can find their 2.5" laptop 750GB serial ATA 7200RPM drives at http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007605%2060003059 9%20600003340&IsNodeId=1&name=7200%20RPM

  • Hello.  I need help.  I use Photoshop Elements 10 on my MAC but it no longer reads discs.  Can I download it from the internet with my original package serial number?

    Hello.  I need help.  I use Photoshop Elements 10 on my MAC but it no longer reads discs.  Can I download it from the internet with my original package serial number?  thanks

    Yes, from here:
    Download Photoshop Elements products | 13, 12, 11, 10

  • 750gb serial ATA drive vs. 128gb SSD

    Hey I'm looking to buy a 13 in. macbook pro and I don't know the difference between the 750gb serial ATA drive and the SSD. I know the SSD will make the computer operate faster, but that's pretty much it. Any information on these two would be greatly appreciated.

    I was in the same position a month ago. Its basically a pro and con list.
    SDD is much more expensive, to upgrade from a 500gb HDD to a 512GB SSD is $1000 dollars!!!
    SDD is more energy efficient, so you will get about an extra half hour of battery life(on average). It is faster to load from, and it has no moving parts so is supposed to be have longer life.
    I however went with a 750GB 7200rpm HDD as I didn't want to worry about running out of space. I use a lot of photos and videos and I didn't want to have to worry about bringing external hard drives around with me.
    Right now I don't think the SSD is necessary for your average person. My 15" is flying with my HDD and I am very happy with my choice!
    Hope this helps

  • Is it possible to run 2 2.7GHz Dual-Core Intel Core i7 8GB 1333MHz DDR3 SDRAM - 2x4GB 750GB Serial ATA Drive @ 7200 rpm together to get a better system

    I want run 2 2.7GHz Dual-Core Intel Core i7
    8GB 1333MHz DDR3 SDRAM - 2x4GB
    750GB Serial ATA Drive @ 7200 rpm
    Would it be worth while or better to get a full spec i7 quad core server

    Just go for the > Mac Pro  - Apple Store (U.S.) instead.

  • Can I boot from an external drive with a "Virtual CD"

    I just purchased a Hitachi LifeStudio external hard drive for use as my Time Machine backup. When I plugged it in to my MacBook running 10.6.4, I realized that it had one of those "Virtual CDs" that contained the manufacturers crapware, similar to Western Digital's MyWare or whatever its called. It shows up in disk utility as an actual separate disk and not just another partition that can be wiped.
    I reformatted the drive using GUID and and created 3 HFS+ Journaled partitions. One was going to be for the 10.6 installer, one for the 10.6 boot, and one for my time machine backup. I restored a 10.6 install dvd disk image I created using disk utility to the 10.6 installer partition (with erase destination checked) then option booted my mac and the partitions did not show up. The only thing I could see was my internal hard drive.
    I have done this many times before and it has always worked so Im trying to figure out what Im doing wrong. The only thing I can think of is that the "Virtual CD" that Hitachi put on this external drive is stopping the Mac from seeing the bootable partitions I created. I even went into system preferences>startup disk and blessed the 10.6 install partition. That didn't work either, the computer just booted to my internal drive.
    So my questions are. Is it because of this "Virtual CD" that I can't boot from my external drive? If so, is there a way around it? I already searched their web site and emailed their tech support asking for a firmware update to remove the virtual cd.
    Thanks in advance.

    Yes, it's a known issue. You've already referred to the issue with WD systems. WD has a long list of products that are either not compatible with Macs or won't boot a Mac.
    There are practically no problems with bare drives, but once installed in an enclosure there is no guarantee that the package will function as a bootable device. This is especially the case if the manufacturer uses some sort of "virtual" scheme intended for using the device as a sort of one button backup device.
    External drives don't have to specifically say anything about being Mac bootable or compatible. It's up to the consumer to verify compatibility and usability.

  • Can you install Tiger onto a drive with data?

    Hello,
    I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
    Its a long story but here is a quick summary of why I am attempting to do this:
    I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
    My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
    I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
    Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
    Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
    One other question:
    When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
    Thanks for any suggestions.

    Thanks scb and Jeff,
    Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
    By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
    And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
    Thanks for the new safer direction.
    [1] Coolmax (CD-311-SATA Combo)
    Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
    http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
    $69.95
    http://store.yahoo.com/directron/35enclosure.html
    $53.99 at directron

  • Can I replace my Matshita CD drive with a superdrive?

    I just purchased a G5 and was thrilled when I saw how easy it would be to transfer all of my old home video to dvd using imovie and idvd, however when I went to complete the first project my machine informed me that I would not be able to burn a DVD.
    Can I replace my current drive with a superdrive?
    If not, can I use an external burner?
    Message was edited by: robsclean

    You should run System Profiler to confirm it is not a superdrive. Only a few models of the iMac G5 had a combo drive.
    You can get an external superdrive. OWC has some.
    http://eshop.macsales.com/shop/firewire/optical-drives/
    A drive with FireWire may provide better performance.

  • Why I can't install Flash Builder 4.6 with a Master Collection Serial Number?

    Hi all,
    downloaded Flash builder 4.6, i had a Master collection 5.5 suite which includes (obviously) Flash Builder 4.5,1.
    I found that I can’t install the 4.6 version with the serial number of the Master Collection.
    The Adobe support told me thet I can’t install the single packet but I can upgrade the entire suite of (probably) six months when the 6.0 version will becomes available.
    I feel cheated.
    I spent a lot of money to buy and upgrade the entire suite and now I can’t upgrade Flash Builder only.
    Can you help me?
    If there is not a solution I think I'll nerver upgrade the suite anymore, I'will port all of my mobile code in Objective-C and "tanti saluti".

    Deeptika's answer is very helpful.
    Now, this is how I activated the FB 4.6, using theMaster Collection CS 5.5 serial number:
    1.- Uninstalled Flash Builder 4.5 from the MC (Select the 'Delete preferencies'- checkbox).
    2.- Deleted and cleaned all program's cache with CCleaner.
    3.- Installed Flash Builder 4.6 in TRIAL MODE, and -IMPORTANT!- Be sure that you are selecting the SAME LANGUAGE on wich you installed your Master Collection!!
        (I had some troubles because I didn't remember that I installed the MC with "Español", and I tried to install FB 4.6 in "Español (Latinoamerica)").
    4.- After a reboot of my PC, I opened Flash Builder 4.6.
    5.- It asked me for a serial number, I had to wrote down my Master Collection's serial number.
    6.- I was happy because my FB 4.6 serial number was accepted, (after three unsuccesful attempts because of the wrong language installation).
    So, everything is about languages.
    In the last case, maybe you should uninstall your entire Master Collection (including Flash Builder 4.5) and then reinstall it (without FB 4.5). Then install FB 4.6.
    Yep, this is a little annoying, but now I can use the Flash Builder 4.6. It worth the work.
    Let us now if you could install your FB 4.6 succesfuly.
    Regards!

  • 750GB Serial ATA Drive @ 5400 rpm or 128GB Solid State Drive?

    Ok so im probably going to get the MacBook Pro 15 inch non retina 2.6 GhZ. it comes with 750 GB Serial ATA Drive and im trying to see if it is worth upgrading to the SSD im going to be using it for a lot of video editing (Final Cut Pro/YouTube) as well as streaming videos and using it for class work give me your opinions on what you think would be best to get if im using it for this thanks! (also ahould i upgrade to 2.7 GhZ.??)

    I agree with Bimmer 7 Series.  I did the same SSD update of the 2.5" Hard Drive.  i went from a 750GB 5400 RPM to a 512 GB SSD and used the 750 for additional storage (put in a chassis) and a 4x improvement on performance on the SSD vs. the typical HD. 
    Boot time went from 50seconds to 10 seconds.
    Loading Parallels 7 load of Windows XP Pro was 1:33 minutes to 40 seconds.
    Excel 2010 load time was 25 seconds, now 7 seconds
    iMovie with 40 minute move added to edit/preview- 40 seconds, now 14 seconds.
    These are just a few examples. I have the 2012 13 MBP (2.8Ghz 8GB RAM).

Maybe you are looking for