CAN I REPLACE 1062MHZ RAM WITH 1333MHZ?

MY SON HAS MY OLD 13" 2008 ALUMINIUM MAC BOOK WITH 2 GB 1062 MHZ RAM. I HAVE A 2011 13" i5 MACBOOK PRO WITH 4 GB 1333 MHZ RAM. I HAVE ORDERED AN 8 GB RAM UPGRADE FROM CRUCIAL FOR THE 2011 MACBOOK PRO, WILL THE 2008 MACBOOK WORK WITH THE 1333 MHZ RAM?

andyandywells wrote:
Yes, as I stated
Yes, however there is a small chance that if the RAM does not work, it may damage the memory slot.
The memory slot is specific for the type of memory needed, and any other type risks the possibility.
Give it a go, but there is a slight risk.
There is no risk of damaging the slot (unless of course it is inserted incorrectly) the physical configuration of the Ram is identical, regardless of speed.

Similar Messages

  • Can I replace InDesign CS6 with InDesign CS6 ME version?

    Can I replace InDesign CS6 with InDesign CS6 ME version? And does the ME version interface in English or Arabic?
    I have a translator who sends me InDesign files using the Sultan font, but when I open it, a lot of the font shows up as math symbols. I have the correct font installed, but I'm wondering if I need the additional features of the ME version of InDesign to make the type correct on my end.

    I don't believe my CS6 is from a Creative Cloud subscription. It was installed by my IT department, so I will ask them.
    When I receive the files from the translator, they send both an InDesign file and a PDF, so I can see it as they see it. However, the InDesign file looks like this:
    But the PDF file looks like this:
    They sent me the font file, so I'm assuming I have the right font and the issue is on my end. Or perhaps not?

  • Can we replace OTR text with Images?

    Hi All,
    I just wanted to know can we replace OTR text with Images?
    or
    Can we define an image as an OTR text? so that it can be placed in the page where OTR text is used.
    regards...
    Ravi

    Hi Ravi,
    it is possible to replace an OTR Text with an image.
    You first have to define the Link in the OTR Text where your image is located. This can be everywhere in the Internet or better on a secured intranet server which everyone can reach easily without permission problems. Maybe in the DMZ.
    You can even link it into the MIME Repository of your SAP System as well.
    Then you have to put that OTR Text into a
    <htmlb:textview> Tag and ensure that the switch
    " encode = "TRUE" is enabled.
    Well thats all.
    Keep in mind that the a different language, set in the Internet Explorer or other viewing instances, disables the link if it not "translated" into that language.
    This can also be an advantage if you got multilingual fixed pictures with drawn text in it.
    I suggest you put all your links ( with a Value Field and at least a name field) into a seperate table into the repository for easy maintaining.
    Greetings,
    Dominik
    Edited by: Dominik Lemke on Dec 19, 2007 12:02 PM

  • Can I replace a DOMParser with a SAX parser?

    hi, can I replace a DOMParser with a SAX parser? In the class "org.apache.xerces.parsers.DOMParser", there is a method called "getDocument()", it returns the document as a DOM object, but I don't see any equivalent methods in the SAX parser.

    I would avoid using SAXParser. It has been superceded by the org.xml.sax.XMLReader class.
    the XMLReader class has a method called parse() that accepts an InputSource.
    Look at the org.w3c.transform (I think that's it) package and it gives you the ability to create a stream from a DOM Document.
    Also avoid using classes that are specific to an implementation of an XML parser. I know from experience that this can really jam things up in the long run.

  • How can I replace the Portal with completely new Flash website?

    Can I replace the Portal with completely new Flash website? My customer do not want the JSP UI. Instead, he wants a completely new designed Flash site. Is it possible to do it? How can I deploy a new portal to cover the current one?

    If you have a look at some of the code examples which do the equivalent of site maps, you could in theory replace the whole portal desktop with some sort of Flash framework which reads the user's role structure at run time.
    I think it is useful to remember that the SAP portal is primarily a business application launchpad. It does that very well. Trying to make it into a Flash launchpad will be challenging.

  • My iphone has fallen into the water 6months ago and there is no apple store in my country so i gave the phone s technical service.but they couldnt repair the phone.and now the battery is swollen.can i replace the phone with the new one in spain?

    My iphone has fallen into the water 6months ago and there is no apple store in my country so i gave the phone s technical service.but they couldnt repair the phone.and now the battery is swollen.can i replace the phone with the new one in spain?

    You can only obtain warranty OR post warranty service in the country of original purchase
    As your iPhone has user damage it has no warranty
    IF the iPhone originated from Spain or another EU country you can get out of warranty service in any EU country

  • Why I can´t install 8GB RAM DDR3 1333MHZ in a MacBook late 2009?

    Why I can´t install 8GB RAM DDR3 1333MHZ in a MacBook late 2009?

    Macs can be very Fussy about RAM...
    It is Important to get the Correct and Matching RAM
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com
    Those sites also have videos on how to Install RAM should you need it....

  • HT1338 can i replace my mac with a newest model and pay a difference

    can i replace my mac with the newest model and pay a difference>>>

    Sorry. No.
    Apple does not have a trade-in policy.
    Best.

  • The demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.

    the demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.
    your recommended second option that i could add true/false case.
    this true/false case must be inside the for loop or outside the for loop?if this case is inside the for
    loop, how can i send stop command from outer while
    loop?
    more over do you have any example for this please?
    thanks"

    You can execute a fixed number of iterations using a while loop by comparing the iteration count to the number of iterations you want and wiring the output of that comparison (e.g. Less Than or Equal To) to the continue (or stop) terminal of your while loop. Which comparison you use depends on personal preference, where you wire the desired count and the interation count, and whether you're using the while loop as Continue if True or Stop if True.
    Ben gave you step-by-step instructions in response to your previous question. Look here for Ben's response.
    Ben's response looks pretty good and detailed to me. It certa
    inly deserved better than a 1-star rating.

  • Can i use PC400 RAM with the Tecra A4 (Pentrium 750)

    Can i use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.
    Thank you

    I dont know if you can use it but as far as I know Toshiba recommend using these modules on the Tecra A4:
    PC2700 256MB (PA3311U-2M25)
    PC2700 512MB (PA3312U-2M51)
    PC2700 1024MB (PA3313U-2M1G)
    These are single channel 166MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM modules.

  • I have a Macbook Pro 15 Late 2011, can i replace the superdrive with an data 3 hdd or does it only work with sata2?

    I was wondering if the superdrive can be replace with an sata 3 hdd or whether it should be a sata2 hdd.
    I´ve heard of problems with sata 3 ssd´s as superdrive replacement.
    thx

    thank you, but the hdd that i was thinking about comes with an 6Gb/s interface...
    http://www.hgst.com/tech/techlib.nsf/techdocs/79BA810F702AD64E88257977006375D8/$ file/TS5K1000_ds.pdf
    do you think i could use this model in the optibay ?

  • Can't replace old text with new text in a text box

    Hello everyone. This is my first time posting in the forum, so I'm hoping this works out well. We recently purchased a few copies of Adobe Acrobt X for the office, and one of the users is having an issue with editing text in a field. She can type new text into a box, but when she goes back to replace that text with something else, the old text stays. New text appears on top of the old text, and you can see both. Is there a way to simply highlight the old text, delete it, and then replace it with new text? Thanks in advanace for your assistance. I understand this might be confusing, so let me know if you have questions.
    Thanks,
    Dan

    You have to use the text touchup tool (there is a new name like text edit tool in AA X) to edit such text. It sounds like you are using the typewriter tool or something like it. Text editing in Acrobat is not for the weak at heart. It can be very frustrating and is not recommended except for very minor changes. If at all possible, you should edit the original and just recreate the PDF.

  • How can I replace a color with a pattern fill?

    Hi everyone, thanks for any responses in advance!
    I've created quite a detailed design that works with 4 pixels per cm and 16 colors, canvas size 120x170cm. I'm wanting to replace all of a single color with a pattern, is there a way to do this?
    I can replace a color with another flat color by using adjustments etc... but I want to fill the entire of one color area with a pattern instead. The only way I can think to do this would be to use the magic wand tool to select every pixel of the same color, then create a new layer and overlay with a fill of the desired pattern, however as the design is so detailed it would take me an awful long time to select each color!
    Can anyone suggest a quicker more efficiant way to do this?
    Thanks!

    Select --> Color Range
    Mylenium

  • Can I replace the LCD with an LED on Early 2009 24" model?

    I have an old 2009 (okay, so not that old) iMac and the LCD has some serious burn-in and it's to the point where I can't use the computer without it hurting my eyes. I'm looking to replace the screen, but the computer still works great and I don't want to have to do this again in four to five years. Any chance I can take an LED display from a 24" Cinema Display and put it in the iMac, or are the connections different?

    Personally I would use a Mini DisplayPort to DVI Adapter, DVI cable and a $130 DVI monitor, before shelling out for a $500 to $600 for a replacement panel. Or at least until your 100% sure, that there is nothing wrong with the logicboard or graphic's chip.
    Optionally a Belkin Mini DisplayPort to HDMI Cable would be an even cheaper setup, if you already have an HDMI TV.
    Addtitionally I would probably just replace the iMac with another iMac or Mac Mini, because it is real hard to justify spending anything at all on a 5 year old system.

  • How can I replace column value with a particular value in SQL

    Hi All,
    Can anyone please tell me how can I format my output with replacing a column value with a specific value which actually depends on the present value of the column
    I am executing the following SQL statement
    select state,count(id) from <table_name> where composite_dn= <composite_dn_name> group by state;
    My Present output is:
    State No.Of Instance
    1 3
    3 28
    I want to replace the value in the column state as follows
    State No.OfInstances
    Completed 3
    Faulted 28
    I want "1" to be reppaced by "Completed" and "3" to be replaced by "Faulted"
    Is is possible with SQL or PL/SQL , if it is then how can I achieve this required result. Please help!!
    Thanks in Advance!!
    Edited by: Roshni Shankar on Oct 27, 2012 12:38 AM

    Hi Roshni,
    I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
    Refer -- http://www.techonthenet.com/oracle/functions/decode.php
    select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
    from <table_2> t2, (select state,count(id) count_id
    from <table_name>
    where composite_dn= <composite_dn_name>
    group by state) t1
    where t1.state = t2.state_id;HTH
    Ranit B.
    Edited by: ranit B on Oct 27, 2012 2:02 PM
    -- link added
    Edited by: ranit B on Oct 27, 2012 2:19 PM
    -- sample code added

Maybe you are looking for

  • Language change in itunes, language change in iTunes

    I am new with Apple products. I bought an pro book and ipad. So in the store all smart and helped to configure both. Even they told me to open account for itunes what I have done. I am German living since 13 years in Spain. So all configurations  are

  • Xmarks doesn't work on Mac OS 10.6.7 in Firefox 4

    Mac OS 10.6.7 can not sync with Xmarks in Firefox 4.0. I get a spinning wheel and it more or less freezes the whole computer never finishing. Once I had to unplug the thing. I wait impatiently for my return to PCs. In the meantime, please help!

  • Error - FF713 while posting credit note using FB75

    While posting credit memo system is giving following error message. Tax code UO country IN does not exist in procedure TAXINJ Message no. FF713 However, tax code UO is already existing in system. Checked using FTXP Kindly revert with suggestion

  • SOME pictures (only some) not showing up in the edit frame

    Hello Instead of viewing the picture in the edit screen, it's just grey, with an exclamation mark in the middle, and a white doted frame. Strangely enough, this occurs only for pictures 1, imported from a CD, 2, and only for the pictures in landscape

  • Tuxedo service as CORBA client

    Hi all- Just want to confirm my approach on something. I have a Tux (8.1) service that needs to call out to a CORBA object for some of it's processing. I think I need to: - Generate client stubs from the provided IDL using Tux provided 'idl' command.