Can I replace an A1022 battery with an A1079?

I bought a new battery for my G4 12' DVI without having the computer with me (long story). Now I've noticed the model numbers on the old and new batteries are different, otherwise it fits. Old: Model No.: A1022; New: A1079.
Are these batteries interchangable? Is it safe to use the new one in my computer? (I haven't put it in/charged it yet.)
Thanks, any advice would be helpful!

All batteries that fit properly into any 12" Powerbook are interchangeable. Early 12" models were originally sold with 47WH batteries, and later ones with 50WH units. There will be about a 6% difference in run time on battery power, when all other factors are exactly equal (as they seldom are), between batteries of these different capacities. Either will work equally well.

Similar Messages

I'm asking about if can i i'm asking about if can i replace iphone 5 battery with iphone 5s

hello sir,
i'm asking about if can i replace iphone 5 battery with iphone 5s
thank you

thank you for your attention Mr Ethmoid
i know that ,
but i'm asking if i have iphone 5s dead but the battery working perfect ,
can i took this battery and put it in other iphone 5 ( sure this was done by maintenance department ) ?
all i need to know if iphone 5 & 5s battery same AMP ? OR not same AMP ?

Can I replace iphone 3G battery with battery from a 2G iphone?

A friend gave me a broken 2G that apparently has a fresh battery? My 3G battery lasts about 5 minutes. Can I put the 2G battery into the 3G phone? Are they compatible?
Thanks for any help.

The battery inside the first generation (2G) IPHONE (4GB, 8GB, and 16GB) is soldered to the motherboard. The battery inside the IPHONE 3G is not soldered, but is almost as hard to access and replace. The iPhone 2G uses a 1400mAh 3.7V battery, while the iphone 3G uses a 1146mAh 3.7V battery. So, no, it won't work, or I should say it would be pretty difficult.
These folks offer battery replacement for as low as $20.00. Why mess with it yourself:
http://www.ipodjuice.com/iphone-battery-replacement-products.htm

Can I replace an A1181 battery with an A1185 battery?

I'm using a white Macbook, model A1181. The battery needs to be replaced. Can I replace it with an A1185 battery?

yes
http://store.apple.com/us/product/MA561LL/A?

Can I replace a mu6 battery with a mu12? If not how about a mu9? I have a G62 series computer.

I am needing to replace my battery. I have a G62-358 computer. I am thinking I would like to replace it with either a mu9 or even a mu12. I understand it would physically be bigger than the mu6 I currently have, and I am okay with it. Would I harm my laptop with the battery with more cells?
thanks

Hi,
Based on this chart, you can only have MU06 or MU09 for G62 laptops.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I replace iP5's battery with iP5s' battery?

I want to extend my iP5's battery, could I replace it by iP5s' battery?

No. The batteries are different, not compatible.

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

Can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

Redkryptonite wrote:
can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???
Hi,
It's hard to say. This service guide says that the P360 supports only 1.2 models only. That is hard to guess which one it is..
http://h10032.www1.hp.com/ctg/Manual/c02641795.pdf
However, there are better processors so pick a better one instead..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Can i Replace Thinkpad E540 Hardrive with SSD?

Can i Replace Thinkpad E540 Hardrive with SSD? if its okey, what kind SSD spesification.
many thanks,
Sorrt for my poor english

Why You will replace ? Just add 128 or more GB SSD m.2

I want to install Google Toolbar for Firefox, but this is availaible only for Firefox 4. Can I replace My Firefox 6 with this older one Firefox 4, please?

Question
I want to install Google Toolbar for Firefox, but this is availaible only for Firefox 4. Can I replace My Firefox 6 with this older one Firefox 4, please?

Which Windows version are you running?
Try to run the Firefox installer as Administrator (right-click: Run as Administrator) and maybe the Firefox program also just one time.

Can I replace the VM included with JD2 with 1 more current?

Can I replace the VM included with JD2 with 1 more current?
IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
the most current (1.2.2) JVM from sun? How? or where can i find
instructions?
d
null

Hi
You can use a different version of the JDK by following these
steps:
1. Tools | Default Project Properties (or Project | Properties
depending on your need).
2. Target JDK version: Click Define.
3. Click New. Browse for java.exe. The Class path and Source path
will auto-populate.
4. Click OK.
5. Select the new target JDK for any existing projects you wish
to use.
regards
Dave Wilbur (guest) wrote:
: Can I replace the VM included with JD2 with 1 more current?
: IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
: the most current (1.2.2) JVM from sun? How? or where can i
find
: instructions?
: d
null

Ive purchased a black coloured iphone 5s but i dont like the colour, can apple replace my current phone with a white one?j

Ive purchased a black coloured iphone 5s but i dont like the colour, can apple replace my current phone with a white one?j

If you purchased your iPhone from Apple within the last 14 days then you can return it to switch it for another color if you wish.
If you purchased it through your carrier, then you will need to look at their returns policy, but I expect it would be similar.

Can I replace my land line with an iPhone and keep the same phone number? Thanks.

Hi, Can I replace my land line with an iPhone and keep the same AT&T phone number? Thanks.

Hi
There are always some wrinkles in this kind of change. If you have a home security system like ADT they require a land-line for their system to work. This less of an issue in apartments and condos - it's mostly a "house" issue.
Before you make the switch (and there may be a switching fee) just make sure you cover all the bases.
Cheers

Can I replace a 1TB drive with a 2TB

I own a first generation Time Capsule with a 1 TB drive (6,106.) The light just started flashing amber and the message with Airport Utility is "Internal Disk Needs Repair." Assuming the drive has gone south, can I replace this 1TB drive with a 2TB one, or is there a BIOS restriction.

It is just time.. the TC were designed to run too hot for the power supply to last.
The fan should be running all the time as indeed they do in the new versions. The supply will be on the edge and in fact what you are experiencing maybe power supply.. it depends.. if yours is Gen1 with 1TB hitachi drive I have yet to see a dead drive.. lots of dead supplies.
If you have Gen2 they changed to WD black.. and lots of the drives are dead.. the typical WD fail 3 spin ups and then nothing. Tell me if you have A1254 or A1302.. from the bottom rubber Mat top line.
New Green drives are lower power consumption but due to their design of spinning down whenever possible they have a bigger motor for start up.. it pulls 2A at 12V and the power supply in the early TC cannot sustain it.
So if you replace disk you really need to replace power supply.
I have a lot of suggestions.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
And even repair kits.
https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
But the design is fully explained.. so if you want to DIY you can.
I have had several people come to me after upgrading the hard disk and finding it then didn't work.. due to power supply being on the edge and a replacement with external 12v supply fixes it.
But is it economic.. ?? That is the question.. If you have a Gen1 with an hitachi drive it could be worth it. As the drive could still be good.. pull it out and test it.
Otherwise buy a second hand Gen4 with 2TB drive already in it. They sell for around $180 here if you shop well. A Gen4 is cheaper than power supply plus hard disk repair for a Gen1 or Gen2 and you get 50% faster hard disk access with the same drive... (TC are processor bound and later ones have 50% faster processor) and better wireless. Or get a new TC.. which is a big jump in price but comes with full warranty.

Can I replace my combo drive with a superdrive??

hello all,
Can I replace my combo drive with a super drive? I see on some of the tech do it yourself pages the G5 17" original imac is supported for changing it out by your self. but how do I go about buying the superdrive...and from whome??
thanks,
marc

As to the DIY installation...I purchased an OWC Mercury 8x dual to replace my combodrive, but the installation directions that everyone refers to on the apple support site says nothing about removing the mounting cage to use in the replacement installation. Am I missing something here? Sure, I can remove the three mounting screws that holds the cage to the drive, but then I'm left with the welded bracket that does not seem to want to move. OWC support was no help at all. Is there a trick to this?

Can I replace an A1022 battery with an A1079?

Similar Messages

Maybe you are looking for