Can I replace an A1181 battery with an A1185 battery?

I'm using a white Macbook, model A1181. The battery needs to be replaced. Can I replace it with an A1185 battery?

yes
http://store.apple.com/us/product/MA561LL/A?

Similar Messages

  • How Can I replace newScale Text Strings with Custom Values?

    How Can I replace newScale Text Strings with Custom Values?
    How can I replace newScale text strings with custom values?
    All  newScale text is customizable. Follow the procedure below to change the  value of any text string that appears in RequestCenter online pages.
    Procedure
    1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
    a) Navigate to the RequestCenter.ear/config directory.
    b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
    c) Save the file.
    d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
    e) Stop and restart the RequestCenter service.
    f) Log  in to RequestCenter and browse to the page that has the text you want  to overwrite. In front of the text you will now see the String ID.
    g) Note down the String ID's you want to change.
    2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
    3. Create the following sub-directory: res/resources
    4. Create the following empty text files in the directory you just created:
    RequestCenter_0.properties
    RequestCenter_1.properties
    RequestCenter_2.properties
    RequestCenter_3.properties
    RequestCenter_4.properties
    RequestCenter_5.properties
    RequestCenter_6.properties
    RequestCenter_7.properties
    5. Add the custom text strings to the appropriate  RequestCenter_<Number>.properties file in the following manner  (name-value pair) StringID=YourCustomTextString
    Example: The StringID for "Available Work" in ServiceManager is 699.
    If you wanted to change "Available Work" to "General Inbox", you  would add the following line to the RequestCenter_0.properties file
         699=General Inbox
    Strings are divided into the following files, based on their numeric ID:
    Strings are divided into the following files, based on their numeric ID:
    String ID  File Name
    0 to 999 -> RequestCenter_0.properties
    1000 to 1999 -> RequestCenter_1.properties
    2000 to 2999 -> RequestCenter_2.properties
    3000 to 3999 -> RequestCenter_3.properties
    4000 to 4999 -> RequestCenter_4.properties
    5000 to 5999 -> RequestCenter_5.properties
    6000 to 6999 -> RequestCenter_6.properties
    7000 to 7999 -> RequestCenter_7.properties
    6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
    7. Restart RequestCenter.
    Your customized text should be displayed.

    I've recently come across this information and it was very helpful in changing some of the inline text.
    However, one place that seemed out of reach with this method was the three main buttons on an "Order" page.  Specifically the "Add & Review Order" button was confusing some of our users.
    Through the use of JavaScript we were able to modify the label of this button.  We placed JS in the footer.html file that changes the value of the butt

  • Can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

    can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???

    Redkryptonite wrote:
    can i replace a p320 cpu with a p360 in a g62-220ca notebook pc ???
    Hi,
    It's hard to say. This service guide says that the P360 supports only 1.2 models only. That is hard to guess which one it is..
    http://h10032.www1.hp.com/ctg/Manual/c02641795.pdf
    However, there are better processors so pick a better one instead..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Can i Replace Thinkpad E540 Hardrive with SSD?

    Can i Replace Thinkpad E540 Hardrive with SSD? if its okey, what kind SSD spesification.
    many thanks,
    Sorrt for my poor english 

    Why You will replace ? Just add 128 or more GB SSD m.2

  • I want to install Google Toolbar for Firefox, but this is availaible only for Firefox 4. Can I replace My Firefox 6 with this older one Firefox 4, please?

    Question
    I want to install Google Toolbar for Firefox, but this is availaible only for Firefox 4. Can I replace My Firefox 6 with this older one Firefox 4, please?

    Which Windows version are you running?
    Try to run the Firefox installer as Administrator (right-click: Run as Administrator) and maybe the Firefox program also just one time.

  • Can I replace the VM included with JD2 with 1 more current?

    Can I replace the VM included with JD2 with 1 more current?
    IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
    the most current (1.2.2) JVM from sun? How? or where can i find
    instructions?
    d
    null

    Hi
    You can use a different version of the JDK by following these
    steps:
    1. Tools | Default Project Properties (or Project | Properties
    depending on your need).
    2. Target JDK version: Click Define.
    3. Click New. Browse for java.exe. The Class path and Source path
    will auto-populate.
    4. Click OK.
    5. Select the new target JDK for any existing projects you wish
    to use.
    regards
    Dave Wilbur (guest) wrote:
    : Can I replace the VM included with JD2 with 1 more current?
    : IE: it looks like JDeveloper 2.0 comes with 1.2 jvm can i use
    : the most current (1.2.2) JVM from sun? How? or where can i
    find
    : instructions?
    : d
    null

  • Ive purchased a black coloured iphone 5s but i dont like the colour, can apple replace my current phone with a white one?j

    Ive purchased a black coloured iphone 5s but i dont like the colour, can apple replace my current phone with a white one?j

    If you purchased your iPhone from Apple within the last 14 days then you can return it to switch it for another color if you wish.
    If you purchased it through your carrier, then you will need to look at their returns policy, but I expect it would be similar.

  • Can I replace my land line with an iPhone and keep the same phone number?  Thanks.

    Hi,  Can I replace my land line with an iPhone and keep the same AT&T phone number?  Thanks.

    Hi
    There are always some wrinkles in this kind of change.  If you have a home security system like ADT they require a land-line for their system to work.  This less of an issue in apartments and condos - it's mostly a "house" issue.
    Before you make the switch (and there may be a switching fee) just make sure you cover all the bases.
    Cheers

  • Can I replace a 1TB drive with a 2TB

    I own a first generation Time Capsule with a 1 TB drive (6,106.) The light just started flashing amber and the message with Airport Utility is "Internal Disk Needs Repair." Assuming the drive has gone south, can I replace this 1TB drive with a 2TB one, or is there a BIOS restriction.

    It is just time.. the TC were designed to run too hot for the power supply to last.
    The fan should be running all the time as indeed they do in the new versions. The supply will be on the edge and in fact what you are experiencing maybe power supply.. it depends.. if yours is Gen1 with 1TB hitachi drive I have yet to see a dead drive.. lots of dead supplies.
    If you have Gen2 they changed to WD black.. and lots of the drives are dead.. the typical WD fail 3 spin ups and then nothing. Tell me if you have A1254 or A1302.. from the bottom rubber Mat top line.
    New Green drives are lower power consumption but due to their design of spinning down whenever possible they have a bigger motor for start up.. it pulls 2A at 12V and the power supply in the early TC cannot sustain it.
    So if you replace disk you really need to replace power supply.
    I have a lot of suggestions.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    And even repair kits.
    https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
    But the design is fully explained.. so if you want to DIY you can.
    I have had several people come to me after upgrading the hard disk and finding it then didn't work.. due to power supply being on the edge and a replacement with external 12v supply fixes it.
    But is it economic.. ?? That is the question.. If you have a Gen1 with an hitachi drive it could be worth it. As the drive could still be good.. pull it out and test it.
    Otherwise buy a second hand Gen4 with 2TB drive already in it. They sell for around $180 here if you shop well. A Gen4 is cheaper than power supply plus hard disk repair for a Gen1 or Gen2 and you get 50% faster hard disk access with the same drive... (TC are processor bound and later ones have 50% faster processor) and better wireless. Or get a new TC.. which is a big jump in price but comes with full warranty.

  • Can I replace my combo drive with a superdrive??

    hello all,
    Can I replace my combo drive with a super drive? I see on some of the tech do it yourself pages the G5 17" original imac is supported for changing it out by your self. but how do I go about buying the superdrive...and from whome??
    thanks,
    marc

    As to the DIY installation...I purchased an OWC Mercury 8x dual to replace my combodrive, but the installation directions that everyone refers to on the apple support site says nothing about removing the mounting cage to use in the replacement installation. Am I missing something here? Sure, I can remove the three mounting screws that holds the cage to the drive, but then I'm left with the welded bracket that does not seem to want to move. OWC support was no help at all. Is there a trick to this?

  • Can I replace the screen myself with a kit on my iPod touch?

    Can I replace the screen myself with a kit on my iPod touch?   Stores are charging in excess of 100 dollars to fix them.

    Note, though, that if you do the repair yourself or have any unauthorized shop do it, you will void any further support from Apple, including having them replace the iPod for their out-of-warranty replacement fee.
    Regards.

  • HT1270 Can I replace PC3 1600 memory with PC3L 1600 memory? MacBook Pro mid 2012, i7 2.3 15"

    Can I replace PC3 1600 memory with PC3L 1600 memory? MacBook Pro mid 2012, i7 2.3 15". I know PC3 memory runs on 1.5 volts, PC3L runs on 1.35 volts.
    Are they compatible with my Mac?

    http://www.crucial.com/usa/en/memory-info < Find compatible memory
    MacBook Pro (15-inch, Mid 2012) - Technical Specifications
    MacBook Pro: How to remove or install memory - Apple Support

  • My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

    My old MobileMe account surfaced when I was on a support call. I didn't discover it until the case was closed. How can I replace this obsolete account with my current iCloud account?

    Do you mean that you were using the Apple ID which is your ex-MobileMe address? It's still an Apple ID, even though MobileMe itself is dead, and there's nothing to stop you from using it as an ID with Support, or logging in here or in iTunes with it. You should make sure you have a functioning non-Apple email address associated with it.
    Did you migrate your MobileMe account to iCloud before 1 August last? If so, you can set up an iCloud account using it, or if you have already set up a new and separate iCloud account you can still log in with it in System Preferences>Mail, Contacts and Calendars so that it runs alongside your iCloud account.
    If you didn't migrate you can still reactivate the address the same way.
    Anything where you've logged in with the ex-MobileMe address, such as support for something you registered using it or a server such as iTunes, will need to continue using it.

  • Since I am writing the book in Italian,how can I replace the word CHAPTER with CAPITOLO ?

    Since I am writing the book in Italian, how can I replace the word CHAPTER with CAPITOLO ?

    I think you need to run iBA in Italian so the templates are in that language.  You can do that by switching your OS X to Italian and then reopening iBA or perhaps by using this app to just change the iBA language:
    http://www.tj-hd.co.uk/en-gb/languageswitcher/
    see also
    https://discussions.apple.com/message/20745332#20745332

  • How can I REPLACE original RAW files with JPG's and keep my 'Develop mode' edits?

    An image describing my problem:
    http://i.imgur.com/hcqMYkv.jpg
    (Lightroom 5)
    'edits' = Edits made in develop mode.
    'CR2' = My RAW image file format.
    I have existing CR2's with edits for them saved in Lightroom.
    I want to replace the CR2's with JPG's, and do nothing else. I want those JPG's to inherit the CR2's edits, but I DO NOT want the edits to be permanently applied to the image.
    If I export the CR2's (which have edits) to JPG's, the edits will be permanently applied to them. I do not want this.
    If I export the CR2's to JPG's without the edits, I have no way of getting the edits back and will have to redo the work if I use that photo again.
    Any solutions? I've been trying for a while and have no idea how to do this.
    Q: Why not keep the CR2's?
    A: I am uploading these files to an online host (S3) as my primary storage method and uploading CR2's takes way too long with my internet speeds. Furthermore, online storage costs money.
    Q: Why not shoot with JPGs instead of shooting raw?
    A: I do my initial edits with the raw files and then archive them as JPG's to save storage space. They won't be raw anymore if I apply future edits, but I still have the option of retouching them from the 'original' state and still have my old edits preserved.

    Probably the best thing for you to do is simply use lossy DNG format (e.g. export as, or convert to..): raw data is re-formatted with jpeg compression (full-rez or reduced-rez), but all raw settings apply.
    If you insist on trying to have a true jpeg file with (mostly) raw settings, then:
    The simplest way I can think of to do it without a script or plugin:
    * Reset the raw photo (consider preserving things that don't translate well, like profile-based lens corrections and white balance).
    * Export jpeg
    * Un-reset the image (e.g. using edit history or pre-reset snapshot).
    * Sync settings from raw to jpeg (note: omit settings that don't transfer well, or that were not reset..).
    * Optionally: Delete raw
    To automate/streamline would require a script or plugin.

Maybe you are looking for