Can i replace logic board mid 2010 with logic board 2011 as newer

i have macbook mid 2010 cor to duo 2.66 my logic board damged can i replace my logic board with newer last 2011 2.3 core i5

mende1
The port placement is completely different on a 2010 model and a 2011 model, so the user wouldn't be able to replace it at all.
Clinton

Similar Messages

TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

Hey Clintonfrombirmingham
I called Apple technical support in Denmark, but with no positive reply.
She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
What can i do now?
best regards Oskar

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

System frozen after 2 min. in Macbook Pro (mid 2010) with OS X 10.6.8

Hello, I'm hoping you can help me.
I got a real trouble with my MacBook Pro (13-inch, Mid 2010) with OS X 10.6.8. It's simple, after at least 2 minutes working, the system gets frozen and the spinning wheel of the death keeps to eternity .
Because of this I decided to reinstall OS X with my original DVD, erasing and creating new partitions on my HDD. When the reinstallation was done, the same issue appeared, the system got frozen when I was configuring it for the first time after installation .
Now I've replaced the HDD and after installing OS X again, the same issue keeps appearing .
I omit that have launched AHT with no hardware errors, reset the NVRAM and PRAM, SMC, etc.
I really need help because I'm desperated.
Have a good day and many thanks in advance.

That's tough, try to hunt down a good service provider, ask the people you if they know of one.
Just to let you know, I had my 2010 replaced TWICE!
That's why I think that may be your problem, I hope it's not.
Best of luck

I've a MacBook Pro Mid 2010 with OS X Lion 10.7.2. and when i try to update my software it says you are up to date in fact 10.7.3 is out.

I've a MacBook Pro Mid 2010 with OS X Lion 10.7.2. and when i try to update my software it says you are up to date in fact 10.7.3 is out.

Actually, the Software Update has been replaced by the Combo Update.

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

Can i use my snowball usb mic with Logic or Pro Tools???

Can i use my snowball usb mic with Logic or Pro Tools???

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

How can ı buy MacBook Pro 13 mid 2010 Serial no W8******ATM battery

how can ı buy MacBook Pro 13 mid 2010 Serial no W8******ATM battery
<Edited by Host>

Either take the Mac in for service at an Apple Store or AASP and pay the full service charge that includes the labor. Or purchase an equivalent battery from any good online store and put it in yourself, all for substantially less. Apple won't sell you the part directly, only to authorized service providers.
Search with your Mac's model number in PowerBookMedic.com or IFixIt.com for the part as well as the how-to.

How can I replace my old print driver with my new printer driver on 13

how can I replace my old print driver with my new print driver on photo elements 13

The print driver is not installed in PSE.
Check with the manufacturer of your printer.

Can you replace a powermac g5 mbd with and Intel mbd?

Can you replace a powermac g5 mbd with and Intel mbd?

I think you would have to do a lot of work in addition to just replacing the motherboard. Like getting a new power supply for instance as the cables won't match what Apple specs for their designed and built hardware. I think the best you can hope for is to reuse the Aluminum tower case, and that's about it.
Some links related to this:
http://hintsforums.macworld.com/archive/index.php/t-96460.html
http://forums.macrumors.com/showthread.php?t=652438

How can i replace the standard ESS iview with my own iview

I want to replace standard ESS addr iview with my own WD developed by ABAP
I added the iview(my WDA) into standard ESS addr page.
(pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.cn/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr)
And make it visible.
But I got this error in ESS PA addr :
WebDynpro Exception: Application PER_ADDRESS_CN Does Not Exist
Here is the error code :
Error code：ICF-IE-http-c:100-u:AC_WANGFZ-l:1-s:CE1-i:SAPCE101_CE1_01-w:0-d:20070514-t:172301-v:RABAX_STATE-e:UNCAUGHT_EXCEPTION
So , how can i replace the standard ESS iview with my own iview?
Thanks

Can you see any Javascript EPCF code in the old iView ? You are surely just going to have to find it (if our hunch is correct) and analyse it and copy it into your new iView so that it functions in some way that at least does not error

Mid 2010 MacBook Pro 15" i7 or new MacBook pro 13" i7?

Hi,
I would like to renew my white MacBook from mid 2009. I haven't decided yet but I have two options in mind, a MacBook Pro 15" from mid 2010 with an intel core duo i7 (I think it's duo) running at 2.8GHz with an integrated card, the intel HD 3000 and a dedicated card, Nvidia Geforce 330m with 512MB of dedicated VRAM, a month old mother board and battery and a hi-res anti-glare display with 7 months remaining of apple care all for £1000. My other option would be a new MacBook Pro 13" with a dual i7 locked at 2.9 GHz and no dedicated graphics card for £1035 from amazon.
I would mainly use it for photo editing using Adobe programs and occasionally some video editing and video gaming.
Which one do you think is more powerful?
ps: I would use an external monitor, 8GB of RAM and an SSD on both
Thanks

MacBook Pro 15" 2010
Intel Core i7 2.8GHz M 640 Arrandale Cores 2 (2867)
8GB max RAM 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM
NVIDIA GeForce GT 330M 512MB (15.85) (369) and Intel HD Graphics 3000 (10) (309)
MacBook Pro 13" Mid 2012
Intel Core i7 3520M Ivy Bridge Cores 2 (4519)*
16GB RAM max actual (8GB Apple) 2 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Intel HD Graphics 4000 (unknown) (465)*
The 13" is a more powerful machine and it has more RAM capacity.

My 4th gen Shuffle just up and died after 2.5 years. It won't charge when attached to my Mac. Can I replace a battery or do I have to buy a new one?

My 4th gen Shuffle just up and died after 2.5 years. It won't charge when attached to my Mac. Can I replace a battery or do I have to buy a new one?

Hi Soldier7439,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Do you have the power adapter to plug into an electrical outlet?
Apple - Support - iPod - iPod nano (4th generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/nano4gen/#
Apple - Support - iPod nano
http://www.apple.com/support/ipodnano/
Cheers,
- Judy

Replacing gen 5 (n) extreme with gen 6 (ac) The new one continues to flash amber.

Replacing gen 5 (n) extreme with gen 6 (ac) The new one continues to flash amber.

Suggest that you find out why the amber light is flashing.
Assuming that you have recent model Mac.......Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the amber dot
Another window will open
If you see an Update button, click it. The light was flashing to tell you an update was available.
Otherwise, look at the setting for Status and click on the small amber dot there. Report on the message that you see.

Please take a quick look at this: Midi Problem with Logic 8.0.2

Hello, I am trying to connect up my Roland FP3 Keyboard with Logic 8.0.2. I am using the following MIDI IN/OUT to USB device:
MUSIC STORE Midi Port 1x1 USB
http://www.musicstore.de/de_DE/EUR/-/art-PCM0006795-000
In the Audio Midi Setup in Mac OS X 10.5.5, the Midi device calls itself WORLDE MIDI PORT and is automatically recognized. However, when I click on "Test Setup", nothing happens. This is not the first time that i have setup such a device and i recall that with other MIDI-USB devices that the computer plays some kind of sound to confirm that the MIDI-USB device is working.
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup. It is unlikely that the device is broken, because I've now gone back to the store where i bought it and replaced the first device with an identical second device - and am now having the same problem. The staff at this music store say that the Midi-USB device should automatically display, for example, C-sharp 4, in the transport bar without any additional tinkering. I have a feeling though that there is some kind of button that i have not pressed (or HAVE pressed that i shouldn't have pressed) and as a result can't play music in from my keyboard into my computer.
I really appreciate anyone who takes the time to give me a helpful pointer here. As you can imagine this is quite frustrating. Thank you very much in advance!
Peter

peterland1 wrote:
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup.
"No in No out" simply means there is no MIDI coming in or going out +at that moment+. If you strike keys and move controllers and it still says no in no out, then you may have a problem. Is that the case? Have you actually touched the keys...?
regards, Erik.

Can i replace logic board mid 2010 with logic board 2011 as newer

Similar Messages

Maybe you are looking for