Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?

I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive. Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP. And if so, is there any special formatting I would need to do?

It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD.

Similar Messages

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

Replacing my HDD in my Early 2011 Macbook Pro...Trying to decide between Samsung 840 EVO 250 gb and Crucial M500 240 gb. Samsung is faster but less "mac-friendly". Should I opt for the Crucial due to the "mac-friendliness"?

I have a S.M.A.R.T error on my current Hitachi drive that came with me Early 2011 Macbook pro. Want to upgrade to SSD.
Trying to decide between Samsung 840 EVO 250gb and Crucial M500 240gb, at this gb range, the Samsung is faster and uses less wattage....ONE PROBLEM...I have read many user experiences that note it is much less mac-friendly...
The software samsung offers is not IOS compatible and some report lower than expected speeds after installation...Also apparently the RAPID MODE of the drive, the fastest drive mode is nonexistant when installed on a Macbook pro?
Should I opt for the slower and more power cosuming Crucial M500 240gb SSD because it is more Mac-friendly? Does anyone have a Samsung 840 EVO 250 gb SSD installed in their macbook pro? What has been your experience?
Thanks ahead of time!
Resoure: http://www.tomshardware.com/reviews/crucial-m500-1tb-ssd,3551.html

I decided against the Evo as there are too many Mac users that have had issues with slow speed on them. Even without these, the main speed that Samsung states for the Evo comes form turbo Write which is a PC only feature as is software dependent.
I'm sorry but Crucials M500 is simply too slow compared to modern drives to be recomended. Read speed is ok, but the write is far too slow for the price.
I've used and installed both a Samsung 840 basic and a Samsung 840 Pro in 2 separate Mac books! and currently have the 840 Pro in my own MacBook Pro and it comes very highly recomended. It's all but the fastest Sata III drive you can buy - A few OCZ drives just edge it but the difference is negligible. Samsung by far have the best reliability though when it comes to SSD's. I've been getting 520Mb/s easily on mine consistently, and without getting a MacBook with a PCIe drive you won't get a faster more reliable drive.
I really would recommend nothing else.

HT201343 I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Another solution is the Air Parrot.

Can my Early-2011 Macbook Pro support dual DisplayPort monitors?

I have an Early-2011 Macbook Pro that Apple states can support two Apple Thunderbolt displays in series (http://support.apple.com/kb/ht5219) but I can't find any information on running two DisplayPort displays in series. I assume that Thunderbolt uses DisplayPort 1.2 which includes the link capabilities but I am not sure as I don't really understand the difference between DP and TB that well.
The displays I would be looking at using are the Dell U2414H (http://accessories.ap.dell.com/sna/productdetail.aspx?c=au&cs=aubsd1&l=en&s=bsd& sku=391-BBNC&redirect=1) which have DP in and out options.
Does anyone know if this will be possible? I don't really have a way to test this myself unfortunately.
Cheers.

I'm curious if you got this configuration working as I'd like to use the same setup (early 2011 MacBook Pro 17" + dual Dell U2414H through daisy chaining the MacBook Pro Thunderbolt port through the monitor displayports).
Apple says you can only have a DisplayPort monitor (Mini Display Port in this case), at the end of the chain, with a Thunderbolt device in between. I'm hoping this is either outdated or just not fully supported but still works.
http://support.apple.com/kb/ht5219
23. How do I connect my Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to my Thunderbolt-equipped Mac when I have other Thunderbolt devices connected?
When connecting a Mini DisplayPort display or a display using a Mini DisplayPort adapter to a Thunderbolt peripheral (except as described in question 24), make sure the display is connected at the end of the Thunderbolt chain. You can use only one Mini DisplayPort device in the Thunderbolt chain.
Note: Systems with more than one Thunderbolt port, like an iMac, can have more than one Mini DisplayPort monitor or monitor connected with a Mini DisplayPort adapter connected as each Thunderbolt port can support one Mini DisplayPort display.

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% InterCheck
      5% iCalExternalSync
      3% WindowServer
      2% CalendarAgent
      2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

Can i install OS X Snow Leopard on my Early 2011 MacBook Pro 13' ?

Hi guys , just wondering can i install on my Early 2011 MacBook Pro 13'' OS X Snow Leopard ? i dont like Lion at all . Many Thanks .

You may be able to install SL 10.6.8 (assuming there was no firmware update) if you follow these directions. Check with MacTracker http://mactracker.ca/ and download their free app detailing more info you ever thought you needed to know about Apple products.
- you can re partition partition the mac drive so that you can retain the pre-installed lion install
- or use an external drive
- attach your computer via firewire 800 to a Mac computer (capable of running 10.6.8 )
- boot the your computer holding down the T key to get it into target disk mode, it will appear on desktop as an external drive.
- install SLS v 10.6.3 Retail version from the DVD onto the new partition or external drive where you want Sl installed.
- install the 10.6.8 combo update.
http://support.apple.com/kb/DL1399
- Install Thunderbolt Software Update (Snow Leopard) v1.0
http://support.apple.com/kb/DL1452

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

Not sure if this will help anyone, but I had trouble installing on 10.8.
I then found this particular support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
I use the printer through usb but my wife uses wireless from her PC laptop.
Andre Francis

Can I hook up an early 2011 macbook pro to a new iMac AND another thunderbolt display?

I want to get a new iMac, and I have an early 2011 macbook pro. Can I use a two-way thunderbolt cable to hook these two up? If so, will I still be able to use full functionality on both as I move windows to and from one of them? (Like, I use my macbook track pad to move a safari window over to my iMac, and then I can either use my iMac mouse or my macbook's trackpad to do things with that safari window.
ALSO, is it possible to hook up an additional thunderbolt display to all of this? Basically my end-goal is to have a macbook pro hooked up to an iMac with an additional thunderbolt display, that's my "dream set-up" which will make a lot of stuff that I do a lot easeir and less crowded on one moniter.

no the thunderbold display thing would let you use the imac as a monitor for the macbook apart from acting the role of display the imac would be dorment so a very pricy monitor

Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

So I have an early 2011 MacBook pro, I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on. I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
I should note, I replaced both the RAM and the harddrive in my Macbook pro. I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
Also I should note I replaced my harddrive. I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's. I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items) The harddrive has been working just fine since then.
In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
Now here is my issue. I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
I know this issue has been posted elsewere but it said answered and the answer is no longer available. I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue. I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
Let me know If there is anything I can do. I'm a now broke college student so i'd like to spend as little $$$$ as possible
*PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

How to downgrade from OSX 10.8.5 to Snow Leopard, on an Early 2011 MacBook Pro, without the original installer disk?

Hello! So here are the specs.
I have an Early 2011 MacBook Pro, which came with OSX 10.6.6 by default.
I've lost my installer disk so I though I'd buy a retail one from the online Apple Store, and version 10.6.3 is what they sent me.
Simply running the install OSX app won't work, I get a msg saying:
-- You can't use this version of the application "Install Mac OS X" with this version of OS X. You have "Install Mac OS X" 23.1.1. --
So, I've tried booting from the new disk hoping to erase my current drive and install Snow Leopard, but no can do, I get 3 beeps and have to force shutdown (not RAM related, see below). Laptop works fine when I spare it this maneuver.
After some research I understand 2 things:
1. Only the original installer disk will let me restore factory settings (and I don't have it).
2. I can only install the default OSX (10.6.6) or a later version (that 10.6.3 DVD may not have the correct drivers for my system).
Are these conclusions right? If so, would the Apple Store replace my disk for an updated 10.6.6. one? If not, then what are my options?
Thank you!
References:
http://manuals.info.apple.com/MANUALS/1000/MA1172/en_US/Snow_Leopard_Installatio n_Instructions.pdf
http://support.apple.com/kb/HT3910
http://support.apple.com/kb/ht2186
https://discussions.apple.com/message/19444837#19444837
https://discussions.apple.com/message/18085179#18085179
http://forums.macrumors.com/showthread.php?t=1163160

Phone AppleCare and order the computer's original disks.
(92307)

Early 2011 Macbook Pro GPU

I know this question has been asked before. My problem is similar to what is mentioned here but I hope someone can explain the error log attached below and hopefully I'm able to find a DIY solution without much cost.
I'm using a early 2011 MBP with Yosemite installed. Not too long ago, I manually upgraded my hard disk to a OWC SSD.
Recently my MBP screen went into white blank screen AGAIN while I was working on a python script which crawls the web with about 10 threads. I used to run this same script without *much* problems before yosemite (ie: i encounter the same problem with Mavericks but not so frequent. I never install mountain Lion before so I can't comment on that. I came from Snow Leopard to Maverick and Yosemite). Other times, my MBP will go into the same white blank screen while doing other misc stuff and this usually doesn't involved me watching any HD video.
A couple of solutions that get my MBP up and running are:
1) I hard shutdown and bootup my MBP. After the apple logo it freezes at the white blank screen. While it stays in the white screen, I will unplug my power adapter and wait for my battery to drain out completely. Once the battery is completely drained out, I will plug in my power adapter and I'm definitely able to boot up my MBP without any problem the first time. I did the same and thus I'm able to post this question.
2) Bootup into safe mode and restart. It works once
3) I have also disabled dynamic switching of graphics card but that didn't work.
Below is my error report. I don't quite understand it. I hope someone explain to me?
Wed Nov 26 23:00:48 2014
*** Panic Report ***
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7fa25f70af
IA32_MC3_MISC(0x40f):   0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7fa25f70af
IA32_MC3_MISC(0x40f):   0x000000000003ffff
panic(cpu 0 caller 0xffffff802161f12a): "Machine Check at 0xffffff7fa25f70af, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010bd43000, CR3: 0x0000000018e1e03e, CR4: 0x00000000000626e0\n" "RAX: 0x0000000000000000, RBX: 0x0000000000000040, RCX: 0xffffff814f6e042c, RDX: 0xffffff814f6e0340\n" "RSP: 0xffffff812ae23898, RBP: 0xffffff812ae238d0, RSI: 0x0000000000000004, RDI: 0xffffff812b337fd8\n" "R8: 0x0000000000000040, R9: 0x00000000ffffffff, R10: 0x0000000000000000, R11: 0xffffff812b337eec\n" "R12: 0x0000000000000012, R13: 0xffffff812b2d7fd8, R14: 0x0000000000000040, R15: 0xffffff812b2d7fec\n" "RFL: 0x0000000000010202, RIP: 0xffffff7fa25f70af, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/trap_native.c:168
Backtrace (CPU 0), Frame : Return Address
0xffffff81034d5cf0 : 0xffffff802153a811
0xffffff81034d5d70 : 0xffffff802161f12a
0xffffff81034d5ed0 : 0xffffff802163acef
0xffffff812ae238d0 : 0xffffff7fa25f91ec
0xffffff812ae23920 : 0xffffff7fa25fbd85
0xffffff812ae23940 : 0xffffff7fa25fc241
0xffffff812ae23990 : 0xffffff7fa22bd0bb
0xffffff812ae239d0 : 0xffffff7fa22bfcb4
0xffffff812ae23aa0 : 0xffffff7fa22c5190
0xffffff812ae23ac0 : 0xffffff7fa22c50dd
0xffffff812ae23ad0 : 0xffffff8021ad8008
0xffffff812ae23b30 : 0xffffff8021b01c92
0xffffff812ae23b60 : 0xffffff8021b02859
0xffffff812ae23bc0 : 0xffffff8021b00003
0xffffff812ae23d00 : 0xffffff80215ea517
0xffffff812ae23e10 : 0xffffff802153e91c
0xffffff812ae23e40 : 0xffffff80215235a3
0xffffff812ae23e90 : 0xffffff8021533e8d
0xffffff812ae23f10 : 0xffffff802160a142
0xffffff812ae23fb0 : 0xffffff802163ac66
      Kernel Extensions in backtrace:
         com.apple.iokit.IOHIDFamily(2.0)[917971EF-5947-3DF5-BB9F-D353D05C0484]@0xffffff7fa229b000->0xffffff7fa2310fff
            dependency: com.apple.driver.AppleFDEKeyStore(28.30)[3BAA7FEE-7EF3-3A9A-A0B1-902A4AB7171F]@0xffffff7fa2290000
         com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0xffffff7fa25ef000->0xffffff7fa2629fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff7fa1d24000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x0000000021200000
Kernel text base: 0xffffff8021400000
__HIB text base: 0xffffff8021300000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 44905012498
last loaded kext at 7194739946: org.virtualbox.kext.VBoxNetAdp 4.3.12 (addr 0xffffff7fa4795000, size 28672)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.3.12
org.virtualbox.kext.VBoxNetFlt 4.3.12
org.virtualbox.kext.VBoxUSB 4.3.12
org.virtualbox.kext.VBoxDrv 4.3.12
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 267.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleMikeyDriver 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.AMDRadeonX3000 1.2.8
com.apple.iokit.IOBluetoothUSBDFU 4.3.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleLPC 1.7.3
com.apple.kext.AMD6000Controller 1.2.8
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.driver.CoreStorageFsck 471
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOSurface 97
com.apple.driver.AppleThunderboltEDMSink 4.0.2
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: OWC Mercury Electra 6G SSD, 240.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Hi all, I had many problems with the GPU of my Early 2011 MacBook Pro and the MLB was replaced three times so far. The first time was about a year ago and I went to an authorised retailer and not to an Apple Store. They first incorrectly diagnosed the problem and told me that they had to replace the hard drive. After that, they still did not really find the problem but said that the MLB had to be replaced, which I did given that my computer was only two years old and running fabulously. About a month later the problem reappeared and the MLB was replaced again, this time by using the 3-months guarantee of the MLB. The first time I had to pay. A few weeks ago I again had problems (the computer was very hot and fans were running at maximum speed most of the time although I was running only Mail and Preview). I'm, I took it directly to the Apple Store and after about five minutes of looking at it they decided to replace in the MLB for free. There is no official replacement program but I think Apple has now recognised the issue and they don't charge you anything if you had the issue before (they call this a repeat repair). So good luck if you haven't solved your problem yet. If the problem reappears there should be no problem.

Early 2011 MacBook Pro logic board upgrade question

I have an early 2011 MacBook Pro 17'. Will a late 2011 logic board fit in the unibody of an early 2011? My logic board crashed and I'm looking to install a new one myself. I just need to see if I can upgrade mine at all. I want to purchase a logic board with a faster processor and hopefully not as prone to the GPU failure. Any recommendations?

You have the problem discussed in a number of discussions on this forum, most notably here -> https://discussions.apple.com/thread/4766577?tstart=0.
Basically the GPU in the machine was poorly soldered onto the logic board. If you take the machine into an Apple Store, they will recommend a logic board replacement. This, however, will not permanently fix the problem. The only permanent fix is to have the GPU 'reballed' - this will cost about $160 and some services offer up to a year's warranty on their work.
I had the problem back in January and, as I was under AppleCare, had my logic board replaced gratis. Once I'm left with no warranty, I will have the GPU reballed.
Take a look at some of the discussion and see some of the photos which are just like yours. The only remedy is the reball.
Good luck,
Clinton

Early 2011 MacBook Pro shutting off all by itself

Early 2011 MacBook Pro 11" shutting off all by itself recently.
I had the logic board replaced 11 months ago because it started to shut off more and more until it refused to boot up again.
Now I am going through the same problem. Is this common?

OK, in that case:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion or Mountain Lion will not solve the problem.

Early 2011 Macbook Pro - Black screen at random

I have an early 2011 Macbook Pro, running Mac OS X (10.7.5). Seemingly at random, the screen will go black and the only way to get it back is to hold the power button down. When it turns back on, everything is running as normal. It's been happening more and more frequently, so I'm wondering is this a problem I can fix on my own? Can it be fixed or is it just a glitch I should just deal with?
(Please explain everything to me as if I were a 5-year-old)

Early 2011 15" Macbook Pro.
Add me to the long list of customers experiencing display issues. HUGE problems with a blank screen when waking from sleep and difficulty starting up (video glitches & hi fan speed). After about 6 months and 2 genius bar visits I finally did a complete HD wipe/clean install of Mavericks with all of the default settings.
The situation has improved only slightly overall, but at first things were great. I was confident I had it licked.
As I restored apps & profile settings things start to get wonky. The last install I did was Picasa (I thought this app was the culprit before the wipe). I successfully restored my Picasa settings and all was fine. I even closed the lid and when I opened it the next day the screen came right back on. Then I tried to sync my iPhone and BAM! Screen goes out and the system is hung (no response to keystrokes or sound events).
Power button shutdown.
Restarted and the Macbook hung as the previously opened apps reopened.
Power button shutdown again.
Restart this time was normal and everything opened just fine. The console logs show NOTHING indicate any issues or that the machine experienced a kernel panic or anything like that.
It's been 1 whopping 36 hours since my clean install and I've already crashed twice.
But now I use my Macbook with anxiety as I never know when it's going to crap out again. Maybe it's time I switch back to Linux on an inexpensive wintel laptop as I won't buy another Apple laptop if this is the what I should expect from a $2000 machine.
Incidently, I also have a 2010 MB pro which had dispaly issues and Apple replaced the logic board at no cost (out of warranty) as part of a replacement program. I've seen MANY forum posts suggesting that Apple should step up and provide the same level of service for the Early 2011 MB Pros... I tend to agree.

Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?

Similar Messages

Maybe you are looking for