Can I replace my hard drive and then reboot from USB external hard drive
Hi,
I've bought a new internal hard drive to go in my Macbook. I am going to backup my current internal drive to a USB external drive using Super Duper. I just wanted to check if it was at all possible that I would be able to boot up from my external USB drive after i've installed my new internal drive or whether the restore discs were my only option?
(My Macbook is quite an early one, 2Ghz Core Duo with upgraded memory to 2GB and OSX Tiger).
Thanks.
As long as it is a GUID partition table you should be able to boot from it.
Similar Messages
-
I ordered the disk to update to Snow Leopard. Did that so I could get the App Store. Did that so I could download Lion. After I installed Lion my MacBook is super sluggish. Takes like 6 seconds just to open a drop-down menu in Finder.
I have been backing up. Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if wipe my drive using the USB Lion OS stick (which I think I'll have to buy even though I downloaded the new OS online)? I have been plugging my laptop into the Lacie drive set on "auto" and it's been working great.
One Genius said yes "you will get everything back" but my Mac buddy says "say goodbye to most of your apps". Then a guy at the university I asked "do you have a disk image". And I said "what the **** is a disk image?".
Is the problem that I installed an OS on top of new OS without wiping the drive? Or, is my MacBook Pro too old? Do I need to buy a new one?
15-inch, Late 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Any help?SA will indeed transfer accounts, files and apps at first start. Can do so even faster if you clone the internal HDD onto the external (just split into a partition large enough to contain it) and then use it as the source. Probably faster than Time Machine too. The safest and quickest way to do a disk image or clone is using CarbonCopyCloner (free), and it will preserve the Lion Recovery Partition too.
Since you'll have to re--download the Lion installer again, note that you can concoct your very own Lion Installer USB Stick with it prior to reinstalling and not have to pay for the Apple-branded version. See Kappy's tutorial: https://discussions.apple.com/thread/3786371?tstart=0
As for the sluggishness, I believe that a great part of the cause is that you only have 2GB RAM. Don't know if your Mac can take more but try at least to get to 4GB, if not 8GB. Should attempt this before messing with the reinstall, as this may get you what you want. -
How to: Add Internal anchors to a PDF and then link from an external webpage?
Hi,
I work in email marketing and create html emails that we send through our own web based system. I am just wondering if it is possible at all to create internal anchors with unique urls that I can then link to from my html email as a hyperlink?
The client has created the PDF and I am wondering if I can create the anchors and when linking to these anchors from my email, it downloads the file and opens to that specific anchor location?
Thanks in advance.I seem to having a new issue with this task. Thanks to Bernd I have managed to create named destinations within the PDF document. From there I have then created the email and linked the pdf url with the destination tag to open to that location. However what we're finding now is that once the PDF has been downloaded once, if you go back to the email and select another link it opens the PDF in the last viewed state.
This client has created one PDF containing many different articles. In the email she has created a table of contents and wants to link from each listed article to that destination in the PDF. But once you have clicked on one link, shut down browser, go back to the email and select another link it just opens what you were viewing last. Is this a cache issues? Are we using the named destination method in the correct manner?
We tried suggesting, linking once to the PDF and then from the PDF creating a table of contents with internal anchors however the client doesn't want this.
Suggestions? -
Can't change song options a and then disappears from library
I am importing audio books into my iMac (Leopard). I just updated to iTunes 8. When I import a cd, I go into info to change some of the options like from music to audiobook, compilation>no, remember position>yes, etc. When I do that, as it is "changing" all of the files, it's deleting them at the same time (just from the library, not the computer). I can't ad them back in. It acts like it's adding them, but nothing appears. The only way to get them back is to delete the library and add everything in the library folder back. Any suggestions?
Dave
in MaineI bought my daughter a MacBook Pro when she went away to college, and I then transfered my music collection from my computer into her iMac (which she no longer uses, so I do). Like xLegend above, I cannot change the info on the songs on the iMac.
The collection consists of songs I bought at the iTMS to a small degree, and songs I have ripped from my CD collection to a larger degree. There are also a number of songs that I have composed myself using Pro Tools and GarageBand, and I cannot change the info even on those...
Does anyone have an idea why this is, and how I can reclaim the ability to change information on the songs in my collection? Thank you for your help.
-Patrick -
Accessing username and group name from an external app
How can I access the user name and group name from an external app..? Where is that stored..?
Thanks
FernandoPost Author: pvierheilig
CA Forum: Crystal Reports
Each BOE document has a unique ID. Knowing that will allow you to access it via a URL while passing required login credentials as well, if I recall correctly. However, your very best bet is to review the SDK. -
How can I Replace a Hard Drive on a 160gb iPod Classic?
How can I Replace a Hard Drive on a 160gb iPod Classic? I am considering buying an iPod Classic off of eBay which is described as 'broken' and having the 'Red X' showing up on the screen. The seller is starting the bid at a very low price, which raises some concerns for me. For this thread, let us assume that the iPod has a broken hard drive that needs to be replaced in order to function properly. I am assuming that merely 'restoring' it would not suffice. How would I be able to replace the hard drive myself, without bringing it in to a store? I have never fixed an iPod's hardware before, nor a computer or any electrical device. I am a novice at such things. Would I be able to fix it myself without wasting money on a broken iPod and new hard drive? Please provide instructions on how to do so =)
Hello there,
Yes, the red X icon is usually a sign of a bad or damaged hard drive. Sometimes, restoring the iPod will resolve the issue, but rarely. Other users were able to smack the ipod against the side of their leg and gain back full functionality of the iPod.
However, if no such luck with either, your next option would be to replace the drive. For this task, you can either opt to repair and replace the hard drive yourself, or opt to send it into a third party repair business to do the job for you.
I use the guides at [www.ifixit.com|http://www.ifixit.com> to help me replace broken parts on an iPod. These guides provide excellent step-by-step instructions as well as photos on how to repair any part from an iPod.
Some other good sites for purchasing repair parts include the following:
[iDemiGods|http://www.idemigods.com>
[RapidRepair|http://www.rapidrepair.com>
[iResq|http://www.iresq.com>
Lastly, I would also like to remind you that ebay also has several great deals on excellent iPod replacement parts. It's where I purchase a majority of mine.
Hope this helps.
B-rock -
Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
Can i download and run itunes from an external hard drive
can i download and run itunes from an external hard drive?
The iTunes application should be on the boot drive but you can keep the iTunes library on an external.
hold Shift when launching iTune sand select Create library and select the external.
This will create an iTunes folder on the external with all the library files and all media will also go into this folder. -
Can I take my old mac and make it into an external hard drive
Can I take my old mac and make it into an external hard drive? It does not work anymore but I would like to make it into an external hard drive. I heard it is not to hard to do myself but I have important information I would like off of it and only really trust the apple store to do it. I know it is possible because I have had a friend that had it done after water went on her laptop. I would like to also know how much is this going to cost and if it is even worth getting done at the store or just do it myself.
Can it boot to Target Disk Mode
How to use and troubleshoot FireWire target disk mode
Otherwise just take the HD out and put it in an external enclosure. -
Can I replace a 1TB drive with a 2TB
I own a first generation Time Capsule with a 1 TB drive (6,106.) The light just started flashing amber and the message with Airport Utility is "Internal Disk Needs Repair." Assuming the drive has gone south, can I replace this 1TB drive with a 2TB one, or is there a BIOS restriction.
It is just time.. the TC were designed to run too hot for the power supply to last.
The fan should be running all the time as indeed they do in the new versions. The supply will be on the edge and in fact what you are experiencing maybe power supply.. it depends.. if yours is Gen1 with 1TB hitachi drive I have yet to see a dead drive.. lots of dead supplies.
If you have Gen2 they changed to WD black.. and lots of the drives are dead.. the typical WD fail 3 spin ups and then nothing. Tell me if you have A1254 or A1302.. from the bottom rubber Mat top line.
New Green drives are lower power consumption but due to their design of spinning down whenever possible they have a bigger motor for start up.. it pulls 2A at 12V and the power supply in the early TC cannot sustain it.
So if you replace disk you really need to replace power supply.
I have a lot of suggestions.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
And even repair kits.
https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits
But the design is fully explained.. so if you want to DIY you can.
I have had several people come to me after upgrading the hard disk and finding it then didn't work.. due to power supply being on the edge and a replacement with external 12v supply fixes it.
But is it economic.. ?? That is the question.. If you have a Gen1 with an hitachi drive it could be worth it. As the drive could still be good.. pull it out and test it.
Otherwise buy a second hand Gen4 with 2TB drive already in it. They sell for around $180 here if you shop well. A Gen4 is cheaper than power supply plus hard disk repair for a Gen1 or Gen2 and you get 50% faster hard disk access with the same drive... (TC are processor bound and later ones have 50% faster processor) and better wireless. Or get a new TC.. which is a big jump in price but comes with full warranty. -
Can I replace the 20G drive in a 2070NR to have two 1T drives?
I have an Envy 17 (2070NR) and it has a 1T drive and a 20G drive. Can I replace the 20G drive with another 1T drive?
The second, 20g drive is a flash module that is designed to speed up the system and hold important files so that the mechanical hard drive is not accessed as often, leading to better battery life, etc. blah blah. I am not sure the 20 gig drive is a standard SATA interface. You might want to look here:
http://www.youtube.com/watch?v=0qOzkiY3MZ8
You will need the hard drive caddy for a second drive I believe. -
Can I replace my combo drive with a superdrive??
hello all,
Can I replace my combo drive with a super drive? I see on some of the tech do it yourself pages the G5 17" original imac is supported for changing it out by your self. but how do I go about buying the superdrive...and from whome??
thanks,
marcAs to the DIY installation...I purchased an OWC Mercury 8x dual to replace my combodrive, but the installation directions that everyone refers to on the apple support site says nothing about removing the mounting cage to use in the replacement installation. Am I missing something here? Sure, I can remove the three mounting screws that holds the cage to the drive, but then I'm left with the welded bracket that does not seem to want to move. OWC support was no help at all. Is there a trick to this?
-
i am enjoying downloading films and shows from itunes on to my pc but hd space is becoming an issue can i copy the files over to an exrenal hard drive and delete the orginals and watch them from the external hd thus saving space on the pc ?
Drag the existing iTunes library to the external drive, launch iTunes with the Shift key held down, and point it to that instance of the library.
(86085) -
I have a 2009 21.5 iMac with malfunctioning internal disk drive. I lost CS2 when I upgraded to OSX Yosemite. I want to install Lightroom. Can I transfer the Lightroom 5 software to an SD card and then download from that to my computer?
you need the installation files, not copies of installed programs.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I cannot delete a file from the documents folder. I can move it to the trash and then empty it, but when I go back to the documents folder, the file is still there.
Gay,
I wonder what your computing environment is. Is your account being administrated by another account? Are you working in an account subject to "Parental Controls"?
Jerry
Maybe you are looking for
-
Importing memos (step by step)
I have a laptop, loaded with windows xp and iTunes. I need, step by step instruction, on how to convert files to a format, my 40 gb, third generation ipod, can recognise and display.
-
IPhoto won't import jpeg photos from camera
I've been using the same method to import photos from my camera to iPhoto '09 with no problem ever since we got this computer. All of the sudden, the photos will not import and the error message says the file format is unreadable. All photos have the
-
Hi I am new to weblogic. I am migrating Weblogic which running on Solaris 8 physical box to Solaris 10 Zone on solaris 8 platform. When I start weblogic instance , it starts and crashes and getting below error in weblogic log.
-
Need help!---lookup connectionFactory failed after restart j2ee server!
hi, I wonder anyone could help me to solve this context lookup problem described as bellows.i should say 'thanks' in advance!!! At the end of the message i post the code used to lookup administered objects then create connection. i use sun's default
-
Getting problem to generate loop for column of dataTable
Hi everyone, I am trying to generate loop for column of my <h:dataTable rows="1" width="1500" value="#{HeadWiseCrimeMngBean.distName}" styleClass="font-right" var="drow" border="1" > <c:forEach begin="0" end="#{HeadWiseCrimeMngBean.vectSize}" items="