Can I replace my MBP 13" early 2011 dual core 2.3GHz intel i5 with the coming ivy bridge quad core?

The ivy bridge processors are coming out soon (or may already be out). I have heard that macbook pro 13" models might be able to use the new processers due to their lower energy useage. I presume that I will be able to take my mac to an apple store and have it installed. Is this information true? Any ideas on a price?

Is this information true?
Absolutely not. The processor is soldered to the mainboard, and is not in a socket. It is not upgradeable.
To upgrade, sell your old one and buy a new one -- just like a car when you want a bigger engine.

Similar Messages

  • HT201343 My MBP is Early 2011 but dunno why cant use mirroring with apple TV, the icon cannot be found

    My MBP is Early 2011 but dunno why cant use mirroring with apple TV, the icon cannot be found. So cannot use mirroring.
    I have follow trouble shooting , they recommend to go system preference -> display , thus can find out the mirroring icon if no mean it doesnt support. But according to the web, Early 2011 MBP should be able to use, dunno why.

    Just realise I havent updated my OS to mountain lion and this is the reason why I cannot use mirroring before ^^
    Thanks all

  • Silverlight (Lovefilm / Netflix) MBP 13" Early 2011, Heating and Exhaust Problems, Clamshell mode with TB Display

    Hi all
    I was hoping if someone can help me out...
    I have a:
    Mac Book Pro 13" (Early 2011) (i5, Crucial 8GB RAM, 120 OWC 6G SSD)
    Apple Thunderbolt Display
    I run my MBP in clamshell mode always.
    Whenever i run Netflix or Lovefilm video in full screen using either Firefox, Chrome or Safari. The Silverlight plug-in is hogging the CPU.
    My exhaust (CPU fan) goes crazy, its soo loud its annoying while your trying to watch a movie on your Thunderbolt Display.
    Temperature reaches: 83 Celsius
    Fan (Exhaust): 5620 - 6200 RPM (immediately jumps from 2001 to 5620 / 6200)
    If i watch a movie full screen on my 13" MBP with my Thunderbolt display disconnected:
    Temperature reaches:  81 Celsius
    Fan (Exhaust): 3198 RPM (it slowly crawls up form 1998 to 3193)
    Now i changed my resolution on my Thunderbolt disply to 1420x720 and it helps with the fans going crazy, they slow down slightly...
    I've tried a PRAM and SMC Reset, all my firmware is up to date.
    My Macbook Pro is slightly raised at the back so air can flow through the vents.
    My FANS are just going crazy!! something is ridicously heating up internally in my machine causing them to go mental.
    You just cannot watch a movie on netflix or lovefilm on your thunderbolt display comfortably if your fans go beyound 2800RPM.
    I even installed Windows 7 on Virtual Box and tried running lovefilm / silverlight and it did not help my problem.
    PLEASE CAN SOMEONE HELP! how can i keep my fans below 2800 RPM while running silverlight?!?!

    Flash like Silverlight are CPU heavy applications.
    The MacBook Pro can be run in clamshell mode but only when not running extremely CPU intensive tasks
    like what you are doing.
    If you keep the mac book running this way for too long you might stress the materials and run into danger of getting thermal damages.
    Chrome is actually in recent time getting very slow and I noticed in a comparision test that Firefox provides me up to 30 to 40% more free CPU time.
    If running netflix I would suggest currently NOT using Chrome.
    Windows 7 virtualized inside virtual box and then on top netflix is uhm a pretty bad idea because all those three things together are already CPU hogs.

  • MBP 15" early 2011 with WDC VelociRaptor?

    I notice that there is a thread for MBP 15" early 2011 with SSD https://discussions.apple.com/thread/2775423 But, I can't afford that type of SSD with only that capacity, i.e. 250GB. Here, in town, it would cost nearly USD500.
    So, I'm start to thinking to choose WDC VelociRaptor 2,5" 10000rpm 600GB SATA III 6GB/s WD6000BLHX http://www.amazon.com/600GB-Sata-6GB-2-5-HD/dp/B003G4I5OA/ref=sr_1_2?ie=UTF8&qid =1303127766&sr=8-2 which only USD300 with more than 2 times capacity of SSD 510.
    I already used VelociRaptor 3,5" 10000rpm 300GB SATA II 3GB/s WD3000HLFS  on my PC and it is producing excessive heat, so that I should turning on the HDD fan which has 2500rpm.
    The question is: will it produce an excessive heat also? since MBP 15" body is aluminum unibody that is perfect conductor to transfer heat. I saw iFixIt website tear it down piece per piece. So, I think it still do able. But is it compatible also?
    thanks.

    Hi n,
    I would continue working with AppleCare, because if it turns out to be a hardware issue, you'll want to get it repaired while still under warranty.
    Have they suggested/have you done a reinstall of the OS yet?

  • OS X Lion Screen Sharing Slow on MBP 13" (Early 2011)

    Hello All,
    I've been cruising forums and various posts, but have not seen anything directly relating to the issue I'm having. I just upgraded all my Macs to Lion and when I screen share(SS) from my lion macs at work to my lion macs at home there has been a notable drop in performance.
    Here's where it get's stupid though. I can screen share to my Mini with very little to no lag at all from my MacBook Air at work. The Mini is directly hooked to my  time capsule (2008,1TB). However, when I SS into my MBP 13" early 2011(wireless connection) the MBP becomes almost completely unresponsive or delayed to any change by 5+min.
    I tried ss'ing into my mini and then from my mini to my MBP 13" and that was at least responsive, but obviously laggy. So what the frick man. Why can't I SS into my MBP from work? This was never an issue when all these macs were running 10.6.8.
    I guess I should also mention that the Mini hasn't been able to update ARD 3.5 yet, because of a separate issue that I haven't gotten around to. Is it perhaps the ARD update that is screwing up my MBP13"?
    Suggestions are greatly appreciated.

    I have the same problem. I think it has to do with the 'server' computer. When I remotely control my other snow leopard computers, it is snappy. When I connect to my iMac running Lion, it is slow. The whole page blinks like it is rendering all text/images/backgrounds all the time. So it seems to be loading the entire frame. On the contrary, when remoted into a Snow Leopard machine, only the word or area that you are typing is blurry, then crisp as it renders. It doesn't try to reload the whole screen since you are only modifying a small portion of it.

  • Lion to Snow Leopard MBP 13 Early 2011

    GDay guys,
    ive bought an used mbp 13 early 2011 and on the recovery hdd is only osx 10.7.5 but ive seen on the apple site that the mbp 13 early 2011 was deliveried with osx 10.6.
    is it possible to downgrade or reinstall to snow leopard?
    can i download snow leopard anywhere for free or do i have to buy it?    

    Depends on what version of Snow Leopard came with the computer. Snow Leopard is only available as 10.6.3 on the retail discs. Newer models cannot boot from that version. You would need the original discs which you can purchase from Apple Customer Service.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.
    There is no "downgrading." You will have to erase the drive and install Snow Leopard from scratch or create a separate, new partition on the drive on which to install Snow Leopard.

  • Should I Sleep/Shut Down my Mbp 13" Early 2011 while travelling with motorcycles

    Hi
    I used Mbp pro Early 2011
    Everyday I travel a lot with motorcycle and always take my Mbp with me  ..
    My questions:
    1. What is the best thing to do if I often carry my Mbp on a motorcycle?
    2. Should I sleep/shutdown my Mbp while riding my bike?
    3. Is it okay if I often shutdown my Mbp or it will decrease the battery life?
    I usually shutdown my Mbp each time I'm on the road with bike .. I'm afraid if I just put on sleep it will damage the Mbp because there's a lot of shock happening when you ride a bike
    Need advice
    Thanks

    Hi thanks for your reply but can you be more specific .. I am new with apple thing
    Is it okay if I often shutdown the Mbp (2 or 3 times a day) ?.. I travel a lot

  • I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

    I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

    You may find this user tip article helpful:
    https://discussions.apple.com/docs/DOC-3521
    Ciao.

  • Static electric feeling near palm rests on MBP 13" early 2011

    i just purchased a MBP 13" early 2011 less than a week ago. when i unplugged the magsafe power connector after full charged, i get this static electric feeling near the palm rest edges (both left and right wrist area). but when i plugged in the magsafe power connector (even though it full charged) I do not get this electro-feeling anymore. is it something wrong with my new MBP 13" ? Should I send in Apple Care Centre for another new set exchange?

    I would take it to an Apple Retail Store or an Apple Authorized Service Provider  (AASP) for evaluation, or call your nearest Apple Contact Center. Visit the Genius Bar at the Apple Retail Store,  make a reservation.

  • Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal?

    Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
    I've had my Macbook for about 11 months now and i use it every day; its gone though about 420 cycles of charging and using the power, and i noticed the battrey preformance has decreased (as expected). The problem isn't sevear yet but it would comfort me knowing that i could replace the battery in the near future
    Please contact me or answer the question if you know anything about this!

    Exitio\'s Apple wrote:
    Can Apple replace my macbook pro (mid 2012) retina's battery if I think that the battery health has gone bad/in need of and renewal???
    No only if they think under warranty/AppleCare, but your likely able to pay for a new battery if they have them, which they might not yet since it's such a new machine still.
    BTW, I have a Early 2011 17" MBP, 27 months old, charges to 97% and has only 14 cycles.

  • Mac OSX for the 13-inch Early 2011 Thunderbolt 2.3 GHz Intel Core i5 model.

    I got a refurb MacBook Pro two days ago.
    It is the 13-inch Early 2011 Thunderbolt 2.3 GHz Intel Core i5 model.
    It came from Apple with Mac OSX 10.7.1 Lion installed on it (and no media on disks).
    According to EveryMac.com this model originally shipped with Mac OSX 10.6.6
    The "Whats in the box" lists the software on DVD as one of the parts that should have been included but there was no disk with the MacBook.
    Was there or wasn't there an actual software install media disk for this model ??
    The fan runs at about 2000 rpm all the time.
    Is this normal ??
    Mike

    10.7 Lion doesn't have disks, but a Recovery Partition accessible by holding command and r keys upon booting.
    You need a internet connection, fast, strong and relaible to download Lion from Apple servers.
    Since that machine came with Snow Leopard originally, you can call Apple with your serial number (AppleMenu > About this Mac > More info) and request new copies of the 10.6.x grey disks.
    You can learn more about Lion by visiting these links
    https://support.apple.com/kb/HT4718
    https://support.apple.com/kb/dl1433
    https://discussions.apple.com/message/16276201#16276201

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

    How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

    I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) .  I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
    Haha!  I should have paid attention and read between the lines!  My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do!  I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy.  I am now going through Photos and making Albums (of what used to be in my Events)  ... maybe I'll get this finished before they do another non user friendly update!

  • I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    What "everything" have you tried?
    What exact version number (down to the last decimal) is your AE?
    What OS are you using?
    What are your other system specs?
    When did it work last? What happened between then and now?
    FAQ: What information should I provide?

  • I have a school license but i can't upgrade to full versions of my apps. I'm logged in with the right account and on my profile i can see the license is activated.

    i have a school license but i can't upgrade to full versions of my apps. I'm logged in with the right account and on my profile i can see the license is activated.

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for

  • Not able to call BPEL web service using RMI call from different machine

    Hi, 1. I have created a smiple Helloworld asynchoronous BPEL process 2. I am able to call that BPEL process using java program (RMI call) which I have written in JDeveloper 10.1.3.3 and the java program is running in the embeded OCJ4 instance of JDev

  • General Warning! [Ralink chipset + Windows 7 64bit + 4GB RAM = driver crash]

    I just wanted to put a general warning out there. There seems to be a pretty big problem with Ralink drivers right now, even ones automatically downloaded from Windows Update for at least 3 Ralink Chipset groups. The problem: There's some kind of mes

  • Problem wiht sender mail adapter.

    Hello. I have a mail to RFC scenario. There sender mail adapter fails if the mails in the inbox is encoded in specific formats. I think the mail adapter does not understand this encoding. Below is the error i got. error occured: [2008-09-08T08:22:25Z

  • What are the advantages of CP7 over CP6?

    The reason I ask is another department here at work got CP6 right before CP7 release (Less than a month)  They are trying to get upgraded to CP7 but have been told by someone at [email protected] that CP7 and CP6 are compatible and you can take proje

  • Download stalls - does'nt open on Mac 0Sx 10.6.8

    Have tried 5 times to get the trial Photoshop CS6 to open - nothing works.  Have CS3 in my MacBook Pro - could that be blocking the opening of CS6?  if yes what should I do?  I'm a novice nerd